F-1005 9 Port 40A Connector Power Splitter Distributor Source Strip, 1 Input and 8 Output.

bought this for my truck set-up. It powers 3 radios (2-motorola, 1-icom) a Motorola charger, and a small computer. no powers problems, but on the big power plugs i need to use a piece of vynal tape to keep the plug from working it's way out from vibration. I'm still giving it 5 stars

Great way to clean up your power supply cables. I recently bought two new ham radios, one for HF and one for UHF/VHF. My power supply has binding posts on the back and one set of anderson powerpoles on the front. I already had an issue with a cable falling off the binding post in the back and this provided a much cleaner solution than having one on the back and one on the front of the power supply. I like the LEDs to show blown fuses, though I have to hope they don't occur often. Still, it's simpler to keep the fusing together there than to use the built-in inline fuses that come with most ham radios. I simply added some anderson powerpoles to each of the radios, removing the inline fuses, and attached to this little device. Of course, I put powerpoles on the fused sections of wire to use in alternative setups. The powerpole connectors the kit comes with are a nice bonus. My two rigs are wired up and running well. Now I just need to find more devices to plug into the extra slots!

This is a great alternative to the much more expensive West Mountain Radio (WMR) Rigrunner units. I love WMR build quality, but ended up going with the Chunzehui F-1005 because it does the same at a much lower price. Check out the pictures. On the top side - with the Anderson connectors, you will see solid thick wires soldered between every 3 terminals. This helps carry current through the thick connectors, instead of relying on the thin copper traces of the PCB board to carry the current. I don't think they use genuine Anderson Powerpole connectors, though operationally there is no difference and their "Powerpole" connectors mated fine with genuine Anderson Powerpole connectors purchased through Powerwerx. My only complaint, is just that Chunzehui doesn't make one with the terminals facing out along the side, for a slimmer profile, like the West Mountain Radio RR/4008H. That's not a knock on this product, as it was exactly as advertised, just a wish for a different layout. This one is just fine, and I ended up using it, but if Chunzehui had one in that style, it would have fit my application even better and I would have been even happier. Great product, and nice to see a quality design at a good price point.

Does exactly what it says on the tin and does in fact work with aftermarket fuses.

Works, is simple but has about a 200mV drop between the power input and all the devices. This could be accounted for due to the connections and fuses. It does the job, it's solid and simple. I have put about 20A through mine, I have yet to see any problems after owning this over over a year.

I really wanted to purchase the West Mountain Radio RIGrunner 8012 to distribute 13.8V/70A to stuff in my shack, but it's way overpriced at $179.95. WMR guys, we do want to buy USA but c'mon! (By the way, Gigaparts is selling the WMR 8012 on Amazon for $225.38, but on their website for $189.90!!! WTF - that's sleazy.) Anyway, two of the Chunzehui F-1005 8 Port 40A units yield similar functionality -- but give a total of 16 usable Powerpole outlets as compared with the WMR 8012's twelve... and this at about half the price. The Chunzehui units are VERY well built (inside and out, I checked carefully), have a solid metal case, and have a very professional finish overall. This is a good, money-saving choice... if you don't mind NOT having the over/under voltage comparators and alarm that are part of the WMR unit. However, to address several of the previous comments: 1. The Chunzehui do NOT use genuine Anderson Powerpole connectors, but instead use ones from a Chinese manufacturer, AITM. (At least, this is so on the two units I received -- see photo.) Having said that, they look identical and many reviews report no issues with them... they mate perfectly with their US counterparts (Anderson Powerpoles). 2. The upside-down silkscreening issue that plagued one of the manufactured batches has apparently been corrected. The ones I received were perfect.

Great item every ham shack should have these.

I finally got fed up with "cigar lighter" plugs disconnecting themselves or getting super hot, and converted all of my 12 V devices to Power Pole connectors. Best decision I've made in a while. These connect solidly, disconnect easily, but don't come unplugged by themselves. This device is like having an outlet strip for 12 V, and in my vehicle I can have a refrigerator, some LED lights, a food warmer, and the vent fan all running at the same time, if I feel like it. The fuse indicators are an added plus. This is solidly built out of heavy gauge aluminum, and I don't have to worry about accidentally smacking it with something and breaking it. I took a look inside, and it has bus wires in parallel with the circuit board traces, so it can handle a lot of current without getting warm.