ELEGOO UNO R3 Screen with SD Card Slot

I'm happy with this module, it comes with a micro-SD card reader, touch layer, and TFT Liquid Crystal Display all in one. I didn't expect much to work properly given this board is 4 times cheaper than the well known touchscreen display on the market. But I've been happily surprised. Everything works smoothly, and the touchscreen is accurate in reading points across the entire surface. (There is NO calibration issue as you control the offset in code yourself) The card - being a shield - means you can just line up the pins on the board to the mount holes on the Arduino, and the card pushes firmly into place. The mini CD that comes with the device (see below for a link) has all you need to get it running, the drivers, libraries, and example code. Once I'd placed the libraries into the Arduino system, I opened the 6 examples and they all ran without issue. It was great! The build quality is excellent - the surface mount chips are all soldered well, the display is mounted cleanly on the PCB. You even get a little plastic stylus for the capacitive touchscreen. Warning! You might need to power your Arduino board along with the USB power. I found my little laptop couldn't power the bright white screen LED's, RGB screen, and Arduino all at the same time. The Arduino would repeatedly "unplug", and then "replug". Once I'd supplied extra power through the Arduino jack plug, it stayed connected. No more brown-outs. I might just buy another one to build a permanent project. -------------------------------- As you NEED to know what the electronic details are, I've included the CD contents on my site: Untamed Dot Co Dot Uk The link is right at the top, and includes the PDF's of the datasheets and libraries and examples. The missing manual. (At least on the product page) Key features: Driver chip : LGDP4535 (The CD also includes data sheet for the ILI9341) Level converter : 5v to 3.3v Screen resolution : 320 x 240 Screen colour: RGB, 65,000 colour. Uses 8 bit parallel bus. Includes Micro SD card holder. Includes Arduino libraries and examples.

Edited review: I decided to try another one of these screens since writing the first review and have changed my review from 3 to 5 stars as the unit I got was clearly a rogue defective unit! I contacted Elegoo and their customer service team were great so after looking around and not finding much else suitable for my project, I took a risk and tried the screen again. The new screen works as advertised and was bright and colourful! The touch screen feature clearly worked well this time and was everything I had originally hoped it would be. I haven't used the SD card as it doesn't suit my project, but if everything is as good as the rest I would be happy with it. Really blown away this time and glad I gave the screen a second chance! Both screens came well packaged and with lots of documentation and examples. Yeah, glad I tried this again! Original review: I was looking forward to receiving this item as I had plans for a project that would use it. When it arrived I was surprised to see that it was in "Shield" form, meaning that it fit directly into the pins of my UNO compatible. It was well packaged and came with a small stylus. Initially, the screen worked well and was bright and colourful. It worked well and does exactly what it is supposed to. My only gripe with the operation of the shield was the "touch" features of the touchscreen. In my case they were not very sensitive and trying to get something to happen via the supplied example sketches the screen cracked. Now this might have been me being a bit heavy-handed, but I don't think so... From the first day of trying this (a week ago) I've been somewhat suspicious that something was not quite connected correctly... Most of the arduino based products from Elegoo have been great... this one has been ok.

Using mine with a Uno as a UART to touch display interface. I have a mega that controls my home heating, and through a ~10m long UART connection, I can control and display via the touch screen. The library I found had the incorrect touch pins configured, so if you have touch problems (no detection) double check your #defines. I was also unable to fully configure the touch calibration using the example code (right edge was not detecting), but through trial and error got the correct calibration values. A few suggestions/tips. Although the SD card works, using the sd lib requires a lot of SRAM (512 bytes are required for sd card block writes), so thats 25-30% of the uno's memory space right there. So for my own scenario, I instead wrote code that reads in from the UART buffer to directly write to the display, parsing for commands to set text colour, position etc. By deleting functions/code not required for my exact tft screen, I freed up alot of space. If you are using the screen for something simple like me, its possible to use an uno, however, anything more complex and it does not have the memory to really do anything useful (and only has the UART pins free), so I would recommend a mega. I was also worried that I would REQUIRE the pen for any useful touch input, but the screen is extremely responsive to touch, more than I thought possible with a resistive panel. Edit: I purchased a second one, both going great left on 24/7.

This is nice bright and clear display. And at a good price. Two things to be aware of though; it is supplied with documentation, examples and Library files on a CD ROM, which not all of us have kit to read these days. You can get hold of the files on-line, but it will be much easier if you can use the CD. The display has a parallel interface and when used with an Arduino UNO, uses almost all of the I/O pins, so if you want to also have other sensors connected, then you really need to use a Mega board.

Muy buena pantalla e incluye el lápiz aunque no es indispensable utilizarlo lo recomiendo ampliamente

Ich habe mir vor einigen Tagen diesen Bildschirm ausgesucht, weil ich ein kleines Display für den Elegoo Mega 2560 haben wollte. Einen richtigen Einsatzzweck habe ich noch nicht und daher habe ich viel mit dem Display herumgespielt und getestet. Der Bildschirm kam in einer kleinen Pappschachtel mit CD, Eingabestift und einem kleinen Werbesticker mit einer Internetadresse, wo man sich eine Anleitung und Bibliotheken für die Arduido-IDE herunterladen kann. Die Anleitung ist in Englisch und für mich mit meinem Schulenglisch sehr gut verständlich, auch wenn man merkt, dass sie wohl von einem Chinesen geschrieben wurde. Die Informationen sind aber alle vollständig, gut verständlich und auch fehlerfrei. Die Anleitung ist zudem an den wichtigsten Stellen bebildert und man weiß sofort, was man machen muss. Die Arduino-IDE läuft bei mir in der Version 1.8.2 und kam sofort mit dem Bibliotheken für das DIsplay zurecht. Die Beispielprogramme liefen alle sofort ohne Anpassungen und sind auch für einem Programmieranfänger verständlich. Wichtig(!!): Ich war zuerst zu zögerlich mit dem Aufstecken des Bildschirms auf den Mega 2560, daher kam nur ein fehlerhaftes Signal zustande und ich war für ein paar Minuten der Meinung, dass der Bildschirm eine Macke hat. Dem war aber nicht so. Man kann die Kontaktstifte wirklich komplett auf den Mega 2560 stecken bis sich die Plastikreihen des Displays und der Mega 2560-Platine berühren. Also keine Angst, dass man etwas kaputtmacht :-) Display: Der Bildschirm ansich hat eine Auflösung von 320*240 Punkten und das langt auch in meinen Augen für den Einsatztzweck. Vorallem wenn man den geringen Preis betrachtet. Der Bildschirm ist ausreichend hell und kann auch bei Sonnenlicht noch abgelesen werden. Die Farbdarstellung ist sogar sehr gut und entlockte mir beim ersten Mal ein "Wow". In Betrieb wird es ganz leicht warm, aber wirklich nur minimal. Daher braucht man wohl nicht auf aktive Kühlung achten, wenn man das Produkt in einem Gehäuse einsetzen will. Die Touchfunktion ist einwandfrei. Es liegt zwar ein Stift bei, aber man kann den Touchscreen auch mit einem Finger bedienen. Alles in allem kann ich nur 5 Sterne vergeben, weil es wirklich ein gutes Produkt ist.

good

PERFECTO TODO BIEN

This is amazingly cheap for what it does. I didn't have any way to play the CD that came with enclosed instructions on how to use this, but a good YouTube tutorial did the trick. Elegoo provides modified Adafruit_TFTLCD and Adafruit_GFX libraries designed to be compatible with the Arduino Mega, which they also sell separately. These modified libraries aren't available on the IDE, so I had to download them and manually insert them into the IDE's library folder. After that it should work really great once you boot up an example. Really good brightness, although, (as any LCD screen would, so I expected this), you can't achieve true blacks with this screen. That doesn't matter at all though. The "touchscreen" part of this works pretty neatly with the examples provided, although sometimes you might have to apply a little bit more pressure than you're used to with the capacitive touchscreens that iPhones and other mobile devices feature. Overall this is a fantastic device and absolutely worth buying. I might buy another one in the future if I need it.