Gorilla Heavy Duty Grab Adhesive White 290ml

Super strong glue and works very fast. It’s easy to use and I was truly impressed by how quickly it would adhere to surfaces

i was putting laminated shower board over tiles this stuff seems to have done a good job of adhering them together, i will say it's good stuff although its only been a couple of weeks ago.

Pretty good but slight problem probably don’t use inside shower tray adjacent to aqua-board or tiles..hot water will permeate it..probably best as sealant inside windows but not outside as weather will fetch it off..you can use behind skirting board and put heavy objects like kettlebells against it for a full day then it will dry and set.. I will use it inside my cellar as I’ve got a dry cellar..if water going anywhere then you probably need silicone sealant..which repels water better and lasts longer..this is more a glue/product

Brought to put up toilet roll and towel rail holders instead of drilling into the wall and it works fine, no chance of coming off, also put hooks on backs of interior doors.

Bought it to attach plastic cat spikes to my concrete fence. Absolutely brilliant stuff, highly recommend it, but can get a bit messy. That might be just me 😜🤦‍♂️

This stuff is one of the best glues I have ever used. The bonding is excellent, I did a test piece to check that wood would bond to Upvc frame and left it to sit for a few hours after holding it in place for about 10 mins. I tugged on that with all my might and could not budge it at all, in the end I had to saw it off and sand it down. I then proceeded to install the frame I had intended to place there, it works beautifully... I even used some of this as a sealent for the small areas that didn't quite meet the frame (not the glues fault, it was the pvc being slightly bowed), and it gives a nice finish if you run your finger down it. If you do decide to finish it as I described, I recommend you use nitrile gloves (or other smooth gloves) that you can dispose of or wash thoroughly. I have also used this glue successfully to bond wood to metal, and wood to magnets for a project I was working on. I hope this has helped someone if they are on the fence about nuying this, it is well worth the money, in fact I bought 2 tubes of this as I had a fairly big area to cover and to use on my magnet project... and I haven't even come close to using one tube yet, it is approx half used. The only bad thing about this glue is the cap, no matter how hard you tighten it, you will be left with a glue plug to remove when you next use it if it's been a few days... if you don't want to waste much, I recommend taking the funnel off the tube and using the bottom cut off a plastic bottle or similar to spoon the glue into from the large end of the funnel using a small wooden spoon (like from an ice cream), then insert a small screwdriver or toothpick etc to remove the blockage from the funnel. Then simply spoon the glue back into the funnel and re-attach to the body of the tube... you then haven't wasted much glue removing the blockage. If I ever run out of this, I will definitely buy again, fantastic stuff at a great price for how much you get in here.

I am quite disappointed with this glue. It does not come out. The consistency is so thick. It does not work as intended. Takes a very long time to dry. Have to use a thin stick to get the glue out which ends up spoiling and sticking everywhere. It was quite expensive as well.

Holds very well