Duronic Projector Mount Stand for Ceiling or Wall Bracket PB05XB | 13.6kg Capacity | Multi-Fit Projector Bracket | Heavy Duty Adjustable Clamp | Tilt Swivel Rotate | White

I used for mounting an optoma uhd300x to the ceiling. this item was far better than I anticipated,especially at this bargain price. I expected to have the fiddly task of assembling a box of parts, how wrong could I be, there are 2 main ready assembled parts. the part you fit to the ceiling is preassembled, I screwed it into a joist. the part for fitting to the projector is complete, you just loosen and swing the 4 arms out, I removed one, only needed three. and then extended two with parts provided. I used the adjustable feet mounts for fitting the cradle rather than the 3 bracket mounting points, they are further apart and I thought it would be more stable. I set the cradle to the projector to give a good balance, then simply hooked the projector up to the ceiling mount. setting the pj to the screen was so easy. one tip I have is to fully undo the 2 tifghtening screws at the hook connection before offering the pj upto it, just makes it a bit easier. I fully recommend this product, compared to the bracket I've been using for 12 years, which cost 3 times as much, is more flimsy. less adjustable and never held its position for long, the duronics is brilliant. it even looks good, with a nice finish. like I say, I used the adjustable feet to mount the bracket to the pj, so you don't even need to get any extra screws/ bolts etc also I don't normally take the time to review a product, so that says something about how impressed I am by this bracket.

This review is of the PB06XL which is the white one with the long, adjustable arm. This is a really strong mount. It seems over-engineered for the purpose. If drilling into a brick wall, which is what I did, you will need an 8mm masonry drill bit. The wall plugs that come with this are adequate if you get it right the first time, but I didn't, so I used my own plugs afterwards which I did find a bit more secure. I ended up using two of the provided screws, which are good quality screws that you need to use a hex socket or spanner to screw in, and that was a really sturdy mounting arrangement. The specification says that this bracket will bear a weight of up to something like 13kg I think. Any modern projector is likely to be considerably lighter than that; I purchased mine in 2016, it is now obsolete, and its weight is about 3.5kg. I think the instructions could have been a bit better. I thought a slight downward slant on the arm with the bracket mounted high would work at first, but when you attach the projector, the arm slowly sinks. It took me a little while to realise that there is a bolt that you set to stop this from happening, but the arm can only have an upward slant, and I had to mount the bracket the other way up and drill two new holes. No bother as I got there in the end, and I can make good the other two holes I drilled. The part that mounts to the projector is extremely flexible. I took a chance with this purchase, as the three screw-holes on my projector are slightly closer than the specified minimum clearance. There is plenty of flexibility within the mount to accommodate this. I did end up with the weight of the projector slightly off-centre, but the mount was strong enough to handle that without any issues. You can lock most of the adjustments when you've found the right place for the projector, but I couldn't find a way to stop rotation through a vertical axis. It is therefore necessary to hold the projector in place when attaching and removing cables, and there is a chance that you can move it out of position. However, as it is only one degree of freedom, it is easily put right if you do this. I am pleased with the purchase. It does the job and it looks good.

I had a old projector and I was very lazy to check if this mount would actually fit my projector so my review i guess is a little irrelevant. However I'll comment on the fact that it looked very well made and would be very strong and sturdy if you have checked it fits your projector. You wont be disappointed. It has a tilt so you can angle it down. Now that I have actually brought a new projector I will check properly so see if this company will supply a mount that fits my new projector as I was very impressed with the quality. and it was such a reasonable price.

Brilliant and no hassle

Strong bracket

This is a great deal at the price. I did consider spending 10x on the one the same brand as my projector but when I saw the Duronic name I knew this was something I could trust. I used my own fixings on the ceiling as the ones supplied were overkill to be honest. I had to use the supplied extensions as the arms weren't quite long enough to fit my Epson TW7100. The plastic spacers were a bit fiddly but when I looked closely at the pictorial instructions I worked that out. Not the prettiest however I don't often stare up at the ceiling.

Good quality, very secure

The unit is very strong and sturdy. However, assembly instructions are hopeless. It is not immediately apparent how the projector is to be attached to the legs. Also, the unit is supposed to fit to a wall as well as a ceiling. I can't see how the angles will allow a wall fitting. No response from manufacturers when advice requested.

El soporte se ve de muy buena calidad (100% estandar para cualquier proyector) y es muy facil de instalar

El soporte Duronic PB05XB ha sido una gran compra para mi proyector. Es compatible con casi todos los modelos gracias a su diseño universal, y la articulación permite ajustar el ángulo perfectamente para obtener la mejor proyección. La instalación fue sencilla, con instrucciones claras y todos los accesorios incluidos. Una vez montado, el soporte es muy estable y seguro, sin movimientos ni vibraciones, lo que garantiza una imagen nítida y constante.

I'm honestly quite surprised by how good this projector mount is. I use it to mount a large projector and it is very steady and stable even though the projector weighs around 12 kilos. Couldn't be happier actually.

Ayant acheté ce pied pour mon vidéoprojecteur et ayant constaté qu'il n'était pas compatible une fois l'article reçu. J'ai entamé une procédure pour pouvoir le renvoyer mais par la suite, je me suis aperçu que je devais payer les frais d'envois donc n'étant pas intéressant, je l'ai garder et se trouve tjs dans sa boîte d'origine. Honteux!