Corsair Internal 4-Port USB 2.0 Hub - 4x 9-Pin USB 2.0 Ports - Easy Magnetic Installation - Compatible with most Intel® and AMD® Motherboards - Black

I have an internal display showing pc details. It connects to a motherboard USB2 header. To improve reliability of the screen, ideally needs additional power. I could have bought a SATA power adapter but thought I'd give this a go, as it would also give me more headers (if needed). Installation is a breeze, connect to the USB header and a SATA power connector. It's built in magnet allows you to install wherever you want, even upside down.

Good value internal pc usb hub, works as intended.

Quality - allows a single USB 2.0 port on a mobo to be extended to multiple ports. Good quality product from Corsair

Additional purchase of this. Apparently one is never enough.

I need the additional USB 2.0 headers to fit in two Corsair RGB hubs, so I can get RGB working for 10 fans in my 3500X case. This was a fairly straightforward setup process. This hub uses one USB 2.0 port on my motherboard and a SATA for power. The back of the hub is magnetic. I put this on the back where an HDD would normally go, and it sticks on nicely without the need for adhesive tape. For 14.99 this was definitely worth it since it wasn't expensive, and now my build looks a lot better with all the lights working.

A very useful piece of kit! I had two USB splitter boards that gave me 4 more ports, but after my AIO CPU cooler pump packed up the replacement had the newer ILink ports, although I still had enough ports They kept dropping out. I replaced the add on boards with this and the problem went away. Job done!

Excellent little device. You just need to plug it in to one of the two sockets that most motherboards have, plug whatever was already in there and then you have three spare usb ports! You can buy cables to divide the motherboard usb in to two but for some devices that doesn't work. This device just works, nothing required. I used mine to drive three assorted Corsair devices. They all just worked. Highly recommended.

A bit disappointed, whilst this product does what it is supposed to, in terms of converting one usb header to 4, I have noticed a significant slow down in my usb devices that are connected through it, especially for data transfer, I've had to start using a spare usb 2 port directly on the motherboard (back of the computer) to get normal speeds again, rather than the front panel USB ports that now come through this device. I only added one extra usb to my computer (to control Bluetooth) otherwise it should be the same.

جودة عالية شكرآ للشركة المصنعة

📝 DESCRIPCIÓN Concentrador interno Corsair de 4 puertos USB 2.0, con conexión magnética y alimentación SATA, ideal para ampliar la conectividad en tu PC. 🖥️🔌 Modelo similar en Amazon pic para conversión a 19 pines: https://amzn.to/419WSqY 🧾 ESPECIFICACIONES - Puertos: 4 x USB 2.0 - Velocidad de transferencia: 480 Mbps - Conexión: USB 2.0 de 9 pines + alimentación SATA - Compatibilidad: Placas base Intel y AMD - Instalación: Magnética (se adhiere a superficies metálicas) - Dimensiones: 5 x 8.5 x 1.6 cm 📦 CONTENIDO 1 - Concentrador interno Corsair 1 - Cable de conexión USB 2.0 de 9 pines 1 - Cable de alimentación SATA 💶 PRECIO - 27 de Enero de 2025: 27,90€ 🟢 PROS • Amplía la conectividad USB 2.0 en tu PC con 4 puertos adicionales. • Conexión magnética para una instalación fácil y segura. • Alimentación SATA independiente, ideal para dispositivos que requieren más energía. • Compatible con la mayoría de placas base Intel y AMD. • Diseño compacto, perfecto para chasis pequeños como Mini-ITX. 🔴 CONTRAS • Solo compatible con USB 2.0, no soporta USB 3.0 o superior. • Requiere una conexión SATA para la alimentación, lo que puede limitar su uso en algunos sistemas. 8️⃣ VALORACIÓN Cogí este concentrador interno de Corsair para ampliar los puertos USB 2.0 en mi PC, y ha sido una solución práctica y eficiente. Lo primero que destaco es su facilidad de instalación: la conexión magnética permite fijarlo a cualquier superficie metálica dentro del chasis, que lo hace ideal para organizar cables y mantener el interior del PC ordenado. En mi caso, lo tengo dentro de la zona inferior de la fuente y me queda muy cerca de la fuente y de la conexión a la placa usb. La alimentación SATA independiente es una ventaja, ya que te permite conectar dispositivos que requieren más energía, como refrigeradores líquidos AIO o controladores RGB, sin sobrecargar la placa base. Esto lo diferencia de los divisores USB simples, que no tienen alimentación independiente y pueden causar problemas de estabilidad al conectar varios dispositivos. En cuanto a la compatibilidad, funciona perfectamente con placas base Intel y AMD. Yo lo tengo con un AMD, para poder tener el visor de temperatura de la refrigeración y una tarjeta pci con bluetooth, a parte de los usb frontales de la caja. 🔍 DIFERENCIA CON DIVISORES USB SIMPLES - Divisor USB simple: No tiene alimentación independiente, lo que limita su capacidad para conectar dispositivos que requieren más energía. Además, puede causar inestabilidad con las comunicación si se conectan varios dispositivos a la vez y requieren velocidad de datos. Ejemplo en Amazon: https://amzn.to/3WWqHJ9 - Divisor USB gestionado. Estos divisores tiene un control electrónico de gestión de datos, pero coge la alimentación directamente de la placa, por lo que puede ser un problema para dispositivos que necesitan algo más de potencia. Ejemplo en Amazon: https://amzn.to/3EtSxX7 - Concentrador Corsair: Tiene alimentación SATA independiente, lo que permite conectar dispositivos más exigentes sin sobrecargar la placa base. Además, su conexión magnética facilita la instalación y organización dentro del chasis. ✅ CONCLUSIÓN Es una solución práctica y eficiente para ampliar los puertos USB 2.0 en tu PC, especialmente si necesitas conectar dispositivos que requieren más energía. Aunque solo soporta USB 2.0, su diseño compacto y alimentación independiente lo hacen ideal para builds organizadas y funcionales. 👍 RECOMENDABLE. ✳️ Espero que mi comentario ✍️ te haya podido servir de ayuda 😃

Awesome corsair quality

Lo compré como solución o alternativa preventiva ante un problema común en tarjetas madre AM4 relacionado a estabilidad de energía en puertos USB 2.0 (9 pin) internos. El hub parece tener una protección si detecta una conexión inestable, por lo que no pude utilizarlo para solucionar mi problema. Pude utilizarlo usando un adaptador de USB 9 pines macho a USB A externo macho, por lo que actualmente lo conecto usando los puertos USB externos de mi MB, y conectando mis dispositivos RGB/pantallas USB al hub de Corsair.

So I have 9 argb fans, an argb reservoir, an argb GPU waterblock, an argb 18 rgb light strip on my lian li evo XL case, and 2 NVME 3 light each water blocks all plugged into this (daisy chained the two nvme blocks with the GPU block and the 9 fans are daisy chained 3 each. This works great. No weird colors or dim/ugly white colors even with everything turned to maximum brightness white (of note the front panel case argb might have its own power supply I'm not sure as the front panel in general has a power plug). If you are new to this maximum bright white color is what will stress a controller the most and this handles it fine. All 6 ports are independent so you can change the color however you like which is different compared to cheaper ones. My only con is it uses molex. This is actually good for me as my water pumps are also molex and I already have 4 things plugged into my SATA but i despise molex and I have no idea why they went with that. also be aware you need a usb 2.0 connector on your board as it does not have any way to connect to the argb header on your mother board (that I have seen at least). The razor software seems perfectly servicable. I have not played with it much but it is easy and not annoying to do basic things and looks like it can do some pretty custom stuff if you want to. It also plays well with signal rgb as long as you close down razor synapse (and kill it in task manager) though I do have some slightly weird colors with signal rgb at the very end of my fan daisy chains for some reason that are not an issue when using synapse. It also will protect itself so if you plug in to many things it will just throw up a warning and shut itself down and tell you to unplug things and restart which is great especially at 40 bucks. Overall highly recommend as long as you have molex in your rig and a usb 2.0 port on your motherboard. Very happy with purchase