Hitlights LED Strip Lights 3 Pcs 1.64FT RGB Small LED Light Strips Kit Dimmable RGB 5050 Color Changing Tape Lights TV Backlight Display Case Lights Shelves Lighting with RF Remote & UL-Listed Adapter

Bought these lights to accent our tv stand &i love them. Make sure you plug them in to test them before you actually apply them because I didn’t have them inserted correctly (there’s like a plus &minus or something like that or arrows &you have to plug it into each other like it says on the instructions) &when I plugged them in they didn’t work. This was ofcourse an easy fix but it would have sucked to have applied them with the adhesive back &then find out I did it wrong. This was my issue however &doesn’t reflect the product. I would recommend these but you could also just buy a strip light as one whole strip. I thought I was going to separate these but ended up just fusing them all together anyway. Colors are super bright but you can dim it down, has a few settings to make it flash &do multiple colors but I don’t prefer it because it blinks, it’s not as much of a soft transition so it messes with my eyes but my kids love the flashy blinking. I also like that it has just a white light on it so if you don’t want color you can have it on the white setting. Looks good during the day &is also a great night light at night, looks cool for movie nights too.

Great lights. Lighting options have come so far over the years, I'm so happy. I purchased two set of these lights for some shelves a long time ago. I ended up running both sets of four strips off one control unit and one remote. I have left those lights on 24/7 most of the time and they've lasted forever so far. So I ordered more for our in home bar build shelving. Two packs of four hooked to one control panel and remote for the back bar shelves and one pack of four for another shelf. They look great. The price is right. The remote works great and there's no interference from any of the three when turning the lights on or off or changing the color or brightness. The curtains are open and I have them set to a pretty low brightness on white right now. Very highly recommended.

Vibrant lighting...good adhesive strip Works well...connections are a bit difficult to snap together but once you do it's game on...very simple and amazing...anyone could install this without professional help...

Bought for the inside of my closet since the doors have a frosted glass. I actually only used one of the three sections and placed that on top of the inside door trim. It's plenty bright just using the one! (Now I have 2 spares if the one goes out). I love that the brightness is adjustable as I just want a soft glow being it's on as a night light of sorts. Having color choices is great too as I liked the red but my girlfriend didn't so we can switch to blue or green etc.

Setup is very easy, just make sure that you follow the instructions so that you connect the strips and connectors correctly. The arrows need to line up, otherwise it won’t turn on. The lights are bright, have several light modes, and the colors are vibrant. Each LED strip has an adhesive tape backing and there are some additional clips included so that you can neatly organizing the connector cables. I ordered two sets of the 4 x 1ft LED light strips and I was really happy to see that you can reprogram one of the receivers so that you can control both sets with just one remote.

While it is perfectly possible and sometimes preferable to simply purchase a large strand of LEDs, cut them to length, and attach the necessary connectors, I had plenty of room in my computer case and did not feel like spending extra on ordering additional adapters, so managed to make these work almost flawlessly. By utilizing an adapter to plug into molex power (purchased separately from Amazon and included in a previous review), I was able to power these directly inside my case. These are also perfect for those individuals that do not have the knowledge about cutting there own LED strands or are simply uncomfortable doing so. Additionally, the colors can be changed or even various actions performed by the lights with the included remote! I found this feature particularly useful as I simply was not sure how everything would look when complete and this gave me the flexibility that I needed. Additionally, all the connectors were already included to connect each of the four, one foot strands of RGB lights together, meaning no other purchases unless the molex adapter is needed as mentioned earlier. I highly recommend these items as they worked great, however, I want to also mention some considerations while installing this item: 1. Each strand contains it's own double sided tape to be able to affix it directly to the items desired. Even though I put it into a brand new case, I did have some slight difficulty keeping the adhesive sticking in some areas, though, admittedly, I did not attempt to wipe down the surface ahead of time. They also include additional adapters that can be used to mount the LEDs that also use double sided tape should that be necessary. 2. Before installing, it is a good idea to attach all the strands together and test them out. I ran into an issue in which I accidentally installed a connector or two backwards (which is possible) and resulted in some strands not working initially. Again, this is more on me than on a problem with the manufacturer. Simply keep an eye on how each strand is connected as there is a little arrow on one side to show the correct positioning. Doing so will save some headaches later! 3. As the remote is IR, a direct line of sight is likely necessary in order to use the remote. Keep this in mind when installing, especially as I did inside a computer case. Formulating a plan as to how this will be installed will allow you to change the lights on the fly without dismantling wherever these are installed. (For me, I actually put the receiver in an open fan port on the top of my pc case. It allows me to change the color when I want and is hidden behind a grill, so is not even remotely visible to others). In the end, I am perfectly happy with these and will likely utilize these or another Hitlights product based off of my experience when I have a need to use them in the future, in computer cases, or throughout the house.

Love these lights. High quality glow. Multicolored. Easy install.

I purchased these LED strips to accent a new PC I built recently, and they have done an excellent job so far. I did have a minor issue with the adhesive not holding on vertical surfaces, so I contacted the seller about the issue. They were very easy to work with and helped me get the issue resolved without any hassle on my part. Overall, 5/5 would purchase again. Pros: The strips are sized perfectly for adding accent light to a PC. Having 4 one foot sections is way easier to work with than trying to use a single long strip or building/soldering them yourself. I tried the remote control through the glass side panel of my case and it worked perfectly. I currently have the lights plugged into the Aura RGB header on the motherboard to control them that way. This also works without issue. This kit includes everything you would need to wire a PC up for lighting including enough extension cables to wire everything in so it looks nice. Cons: As I said, I had a minor issue with the lights not holding on vertical surfaces. This was solved by using some double sided mounting tape, which has held well. I am not entirely sold on using the included clips. The adhesive does seem stronger, but it created a 'speed bump' looking bubble over where the clip was, causing a part of the strip itself to lose contact with the case. These bumps were always the first place to lose their grip before I used the double sided tape. Other: I also have some LED lights around my desk that has been installed for a while. It is the same type that is sold in 15 ft rolls that you can find all over on Amazon. The wiring for the LED strips I already had and these were different, so that when I tried to wire them into a single controller and power supply the blue and green channels were reversed. So if I had full green on my old LED's it would have full blue on the new ones inside the case. This isn't something that the seller can control, nor is it something I thought to ask before purchasing, but it is something to consider. Oddly enough, because only the blue and green channels are reversed, full red works fine. I was able to solder in a wire a crossover for the blue and green where the new LEDS are wired in and after that the colors matched without issue.