Gear Shard 7-in-1 Keychain Bottle Opener Multitool with Screwdriver, Gifts for Dad, Fathers and Men from Daughter, Wife or Son - Silver

The Gerber Gear Shard 7-in-1 is a compact, versatile tool that delivers excellent functionality in a small, portable design. With seven essential tools, including a bottle opener, pry bar, flathead screwdriver, and more, it’s perfect for everyday carry or outdoor adventures. The build quality is solid, and it’s incredibly durable, making it ideal for a variety of tasks. Its sleek, minimalistic design fits comfortably on a keychain, making it easy to have on hand when needed. A must-have for anyone looking for a reliable multi-tool that won’t take up much space!

Tool purchased from Amazon directly. The Gerber Shard arrived in a very small box. Inside, the tool was wrapped in unsealed plastic. It was clean and obviously unused. For years, I had a large and heavy (but loaded) Leatherman Juice multi-tool on my keychain. Recently I replaced it with a Spyderco Delica knife, which I found Id use more often, beside being far, far (far far!) lighter. But that left me without some essential tools. Luckily, I found this Gerber Shard, and purchased it hoping it would fill some of the gap. It fits perfectly and conveniently on my keychain. There's no noticeable weight gain; it's a little longer than my keys, and it has a large lanyard hole so it will fit easily on any keyring. I do recommend a quick-release or detachable hookup of some sort because of the difficulty turning a screwdriver with a bunch of keys in hand! I use a small caribeaner as part of my keychain, and I can get this tool off in a snap. The Shard is satisfyingly strong. I have used the phillips head to tighten a variety of things, including a loose door handle which I made so tight, it dug into the wood. The head showed no sign of stripping. The medium flat head performs similarly, without any wear showing on the tool. I have also used the mini pry-bar, and it performed perfectly without even a hint of stress on the tool itself. The phillips head is not sharp enough to use an electronics screwdriver, but it is perfect for even somewhat small hardware screws. There are actually two flat-heads, though the caveat about electronics screws still applies. I have not tried the wire stripper, but I would most likely run my knife blade around the wire encasing before giving it a try. I have no issue with ergonomics. I certainly would not use this for heavy-duty repairs or buildouts, but that's not what I bought it for. As a handy touch-up tool, I have not experienced any issues like strain or cramping. The Shard fits neatly between my thumb and forefinger, and because it's somewhat akin to a 90-degree angled hex wrench in how you apply it, it provides a good amount of leverage even when held with just those two fingers. I highly recommend the Gerber Shard. It's a great tool that's met all my needs (so far), and at a great price too! I even bought a second one because I began using the original with my knife sharpening kit. It's that handy!

Contrary to some other reviewers, I think this little tool hits the mark for every one of its advertised uses. Moreover, it's truly keychain-ready: I weighed the key of my truck (just a regular key, not a fancy one with remote keyless entry built in) and my key weighed 17.9 grams. The Gerber Shard weighed 20 grams. And, the truck key is just a tad longer than the Shard. So, it really is something you'll use and carry, not something to lay aside somewhere and not be able to find when you need it, or keep in the console of your vehicle where it isn't always at hand. That's significant because you can find dozens and dozens of multi-tools (I own several, in fact) but if they're not with you and you're going to have to go get them, you might as well just go get the actual purpose-designed tool from your toolbox and forget the multi-tool. Okay, so how does the Shard work: 1. Wire-stripper: reasonably well if you understand that the best technique for using it is to press it straight down into the insulation just until you feel it contact the conductor part of the wire, then withdraw the tool, turn the wire over, repeat at a different position to score the insulation all the way around, and then slide the insulation off using your fingernail to slide it off, not the tool, to avoid damaging the wire. (If this is hard to visualize just think of how an actual wire stripper removes insulation and use this tool to perform the same type of action.) The people who claim this doesn't work as a wire-stripper may be trying to whittle the insulation off with it, which isn't how you strip insulation off wire unless you want to damage the actual conductor. Also given the size of the tool you're probably limited to no bigger than AWG 12 wire or so. But, you know what, if you're rewiring your barn you might want to invest in an actual wire stripper that has special places to strip each gauge. The Shard is for those times when you need to put a new plug on a lamp or extension cord and you don't have all your other tools around. And, I know it works for that exact repair because I did it, using no other tool but the Shard as both a wire stripper and screwdriver. Screwdrivers (3): better than some on advanced multi-tools owing to the small size and maneuverability of this compact item. You can not get a monstrous amount of leverage though for the same reason, so it's not going to work if the screw is super tight. The Shard's Phillips driver worked great for tightening some loose screws on a family member's screen door. Also very appropriate for minor electronic repair, such as removing the case from a computer. Flathead drivers (2) give a nice sizing variety and seem to fit a lot of commonly-seen screws. Bottle opener: pretty straightforward, no complaints. Does tend to distort the cap some on some bottles so it's sometimes better to use the opener in two different positions, making it a two-step operation. Minor issue, for certain. Prying: works great as long as the size of this tool gives you adequate leverage. Way better (and safer) than messing up your knives or screwdrivers by using them to pry. Lanyard hole: okay, calling this a "use" of the tool, as Gerber does, may be a stretch, but this ability to slip it right on your keychain is what makes it so valuable. Maybe they should replace the hole with a standard or metric wrench size/shape and then you have a bona fide seventh use, plus it doubles as a lanyard hole. In the overall picture, every single claimed function of this tool works great - and it's the size and weight of a key, and only costs a few bucks. The Gerber Shard is an outstanding, worthy little tool that everyone should own.

To date, I have bought/acquired three of these wonderful little tools. I gave one to my cousin, one to my (ex)wife, and have kept the original for myself. Honestly, I'm probably going to buy a few more (sister, brother-in-law...) The bottle opener is perfect. It doesn't chip the edge of the glass bottle's mouth when you pop the cap off (this is one of my pet peeves! I don't want to drink shards of glass!!!) The phillips head screw driver is quite pointy. I've been working in I.T. for 25 years, I've used all types and brands of screwdrivers, and I'm here to tell you that this has one of the best laptop-sized phillips head screwdrivers available. I honestly use this tool first when I'm opening a laptop that has stripped/goobered screw heads. The pry tool is on the thinner side, which makes it more usable than other pocket pry tools on the market. If you've ever been picking at a container with your fingernails and just can't quite get it open, this is where this tool shines. It can slip into the same small edges/cracks that your fingernail can, but it's made of steel, so you can absolutely twist and wrench on whatever annoying container you have that refuses to open. This is a small, smooth tool, so if(WHEN) you get one for yourself, it lives most comfortably attached to something else (a lanyard, a bit of paracord, a keychain, etc.) As far as small pocket sized tools go, this one is a very tiny king.

This is a great little tool and I've bought it for my father and brother. You can always use a screwdriver but the angled 'pry bar' is the genius. I use it to open packages constantly and its crotch edge is sharp and can cut small threads and tags. Perfect for a keychain. Won't put a hole in your pants. No knife to get you in trouble at the airport.

Last weekend I dropped the transmission out of my F-150, rebuilt it and re-installed using ONLY the Gerber Shard and some red Loctite. Truth? You be the judge. One thing that is not in question is the coolness of this little tool. Any key chain will be honored to hold this multi-faceted, multi-specialty, multi-purpose tool. I wrapped it with paracord to give a little extra purchase when cranking down on that pesky Phillips head screw. You can find numerous videos on how to do that or just man up and try it yourself. I have used it mostly for opening Amazon boxes containing other cool EDC stuff. All joking aside, it is very well built and has a little “heft” but not heavy. I chose the silver Titanium Nitride Coating version (vs. black) because how often do you get to say “Titanium Nitride”? Full disclosure, I think both of them are Titanium Nitride, so maybe I just thought the silver would hold up better in my pocket. I did drive a nail in a board just to see if I could pry it out. It did! Other features are Small and Medium Flat Driver, Philips Head Driver, Wire Stripper (untested), Bottle Opener (heavily tested) I have the Nite Ize G-biner #2 and the Shard mates nicely with it. If you have smaller ring, you might add a small section of paracord to the Shard to hang from. Lord knows the hole is big enough (sorry, not sorry). They claim it is TSA approved and airline safe. I cannot attest to that because, frankly if TSA approves it, it kind of diminishes the coolness. Cons? Maybe the lanyard hole could be smaller. But hey, Maybe I could be taller but I’m not. For comparison, I also have the Nite Ize DoohicKey and I like the Gerber better just for the heftiness. You will lose this tool before you bend or break it. 5 stars

I love the concept of Every Day Carry (EDC), and I was brought up to have something like this in my pocket on a daily basis, but I'm also a minimalist: I don't like having a pocket full of gadgets or things on my belt. At least not in Every Day situations (I'm totally up for it in the backcountry). So when I read reviews of this device, I was compelled to give it a shot because it was (1) TSA compliant (verified; I've taken it through airport security), and (2) size and weight. If I was going to satisfy my minimalist side, this thing had to be simple and lightweight, but for it to survive in my pocket, it also had to be at least somewhat useful. With that in mind, I added it to my keychain and waited. Surprisingly, I've used it a LOT recently, and it has earned a place on my EDC. My first few interactions were when I needed something sharp. Although this doesn't have a knife or blade, the edge of the pry bar is flat and sharp, and I'm able to drag it along packages I need to open. The same is true for the philips head at the other side. It's just pointy enough that you can use it for simple puncturing and cutting. I don't know if this is all be design or chance, but it's enough for my purposes. I could certainly find a use for a blade (for example, cutting of paper), but if they put on on there, then I'm going to need a cover/sheath of some sort, and that adds weight and bulk. So I guess I'm okay with the way this works now. The prybar has proved useful too, even as small as it is. I've used it a couple of times to pull out staples or tacks/nails, and it does well. What surprised me the most was the philips head. We were moving our kid into college and had brought along a toolbox and assembled everything in the dorm. Then on the last day, we bought a last-minute vacuum and took it to the room. I thought it would be pre-assembled, but found it had four screws that had to be installed. I could have gone back to the garage and got my tools, but thought I'd give the Shard a try. Surprisingly, the philips head was able to turn the screws, and even when they got into a tight spot against the handle, I was still able to get the screws all the way tight using JUST the Shard. I won't say it was super easy, but the relevant point was that it worked just fine. This pretty much sold me on the utility of its EDC and position in my pocket. Where other small multi-tools haven't survived in my pocket, I think this one is going to make it. By the way, I am a huge fan of Gerber devices (mostly blades) and super excited to see that this is now EDC for me. My only complaint is that the black metal coating is quickly wearing off of the Shard due to having it on my keyring. I guess this fairly expected, but it's kind of disappointing to see it wearing off so soon. I'll have to see how it looks after the year mark. Overall, though, I'm very impressed with this device!

I have had the Gerber Shard for a few months now and have traveled on an airplane several times. While I have not had the Shard confiscated yet, airport security does look at it very carefully. I had one TSA agent ask me flat out what it was and I told him it was a bottle opener. With that being said, I have tried what I think are all "7 uses" which I have listed below. 1. Bottle opener = works well and looks more respectable on my keychain over the Coors Light one I had on there 2 & 3. Small and medium flat drivers = too wide for most screws that you might use 4. Philips screwdriver = works well with smaller head screws but not helpful on even medium sized screws 5. Wire stripper = not very effective as you have to be very careful so as not to rip the wire, much easier to use a normal wire stripper 6. Pry bar = very effective, I was able to open a can of paint with no problems 7. lanyard/keychain attachment hole (kind of a stretch calling this a use) = large lanyard hole which easily accommodates key chains or hooking to your pack In terms of the 7 uses, I would say besides the bottle opener the pry bar is the only really other "useful tool. Overall though, if you're looking to replace your free Budweiser or Coors Light bottle opener on your keychain, then this is a great tool. You get a lot of "wow that's cool" factor.