Resiners Resin Dryer for Cup Turner, 1 Hour Tumbler Craft Finished, Epoxy Resin Curing Machine for Cup Turners for Tumblers, Resin Tools for Fast Drying

It does cure as it says, but it depends on how thick you put on the epoxy. It has to be thin layers, if the epoxy is thicker, it won't dry evenly and there will be ripples because of the heat setting the epoxy faster. If you use stickers on a cup and then epoxy over them, the epoxy makes dimples and dips, due to the heat on the stickers. I think that is great for first coating of epoxy on tumblers if you are in a hurry to complete the cup. This way you can get the coats on faster. I don't know if I would recommend it for final coatings.I like the fact that it does cover the cups so that there isn't any dust or other particles landing on the cup as it is drying. It's light weight and easy to put together, it is well worth the money. The design is amazing, but it would be nice to have a timer. As far as the stoppers for the feet to be put on the bottom I just used E-6000 adhesive.

Overall I am happy with my box. There are a couple things I do wish were different. I wish there was a timer on the box so if you forget to look at the clock, you would know where it was in the curing process. I also wish it was a bit larger. When doing 40 oz cup there is only about half an inch on the top and bottom of the cup before the front and back of the box. The first time my cup touched the back which messed up my resin. I’ve been very careful to move it slowly to avoid that. And extra inch would be very helpful. The height also needs to be taller. I wanted to epoxy the handle on the cup. But it hits the bottom of the box. With the length of my spinner, I have to slide the box over the spinner bottom so I can’t raise my spinner to give me more space on the bottom. My spinner is standard size.There are silicon feet provided to raise the box up, but there are no pre drilled holes so I feel that wouldn’t be very sturdy if you did need to raise your box.It takes me two rounds to be able to set my cups. This might be due to the temp here or humidity.Overall I like the box, but do think there is room to improve it.

Ufff la mejor 🤗

I bought this dryer. I also thought it came to tumblers. It does not so I had to order two tumblers after I tried it out. It is definitely a game changer. You push the button and you let it do its thing for an hour after it shut off by itself in an hour, I checked it. It was not tacky or sticky. I’d say it probably needed it little bit of time to set, but I could touch it. I could handle it. I pulled it off the Tumblr and no imprints and the resin you put it together. there is actually three solid sides And the dryer top you put all that together. There’s a blue silicone mat you put that in the bottom and your Tumblr is ready to go in it. You still keep it on the Tumblr machine and you slide it in keep in mind the bottom of the Tumblr machine goes underneath the dryer , if not, if you tried to fit the whole thing in there, it is definitely gonna ruin your cup/Tumblr then after even insert it you have a front piece that has two almost oval cut outs you insert that in the slot on one side machine on the other And you put this in between that it has magnets so it will hold that wall up. I guess in a lot of Ways It is worth the money but when you don’t have a whole lot of money to play around with it, could’ve been a little cheaper my opinion but what a game changer yes, I would recommend it.

It was broken when I received it. I was disappointed very much

CONS:1. No written instructions...only pictures2. Included 4 pieces not mentioned..look like "feet" or maybe spacers? See photo #2.3. The back acrylic pane has a spider web cracking near the top. I need to know if the cracking will worsen with use and can you send a replacement panel?4. The silicone mat is much too large for the floor if the enclosure.PROS: This product was relatively easy to assemble.I have not used the products I cannot comment on its use.I will ammend my review after hereing back from their customer service dept.UPDATED REVIEWGreat customer service. I was given the opportunity to either return product or receive a $20 credit and I accepted the credit.I have used the product almost daily and it works great. I live in the Midwest and Temps are getting cooler and the humidity can be brutal, but with the aid of this machine those problems are solved. I can completely finish my tumblers in about 4 to six Ours depending on the number of epoxy coats that I need to apply. I will be purchasing another unit in the near future. My only issue is that there is no on/off switch. The unit must be unplugged to turn it off. The heating unit stops after one hour, but the unit is still on. It needs to have a switch or shut down completely. The unit is very quiet. Oh, and the clear pegs are indeed intended to elevate the unit, if needed. There is no place to attach them, so I just used the flatpcs of stryofoam that were used in the packaging.UPDATE 9/16/23I have used the unit practically every day since receiving the unit. I am not sure if I will be keeping it. The fact that it does not have a main off/on switch has become a real issue. I also don't like that it only runs with heat for 1 hr is also an issue, as everything I have made requires a 2-hour dry time. I have to manually unplug the unit . Also, the little magnetic door is a real pain to get into place. I will be returning the unit. Even though you have an awesome customer service dept.

It has warm heat blowing and lighting and really dries hard in a couple hours.

Amo esta máquina de secado excelente. Gano mucho tiempo con ella.