Pelican 1535 Air Case With TrekPak Dividers (Black)

This pelican case is very rugged. It’s built to last. It can be used for a wide variety of things from travel clothing to electronics. With foam inserts it is perfect for sensitive electronics. It is waterproof. With 2 latches that release when pushed in it is very easy to use. Perfect for travel with wheels and a collapsible handle. It does not have pockets, but foam inserts can be added to accommodate items with a custom fit.

I’ve found the Pelican 1535Air TP case to be EXACTY what I was looking for. When it arrived, I spent approximately 40 minutes laying out three various designs on paper, until I had one that ensured I had maximized the cases space for my camera and peripherals that ABSOLUTELY NEED to travel with me. However, after becoming a bit despondent over the fact that I would not have quite enough space for my eighth lens, I postulated that I could live without that Rokinon 14mm f/1.8 in lieu of the HD PENTAX-D FA f/2.8 15-30mm ED SDM WR. If the 15-30mm f/2.8 is being substituted for the 14mm f/1.8 when used for astrophotography, I’ll simply need a longer exposure which won’t pose any issues with the Pentax K-1 in Astro-Tracer mode. Plus, I’ll stop down to f/4 just to be sure those corners are also a bit sharper. I also opted to purchase one Pelican #1506TSA PeliLock, and newer CVPKG inside lid netting storage holder, which seems to have a bit heavier gauge nylon netting, more robust zippers, and solid ‘backing board’ than Pelican’s original lid netting storage system.The CVPKG lid organizer comes with four screws for attachment to the 1535Air TP’s lid, whose female thread screw posts are part of the same polymer as the lid, and extruded about 3/8” – 1/2” from the inside top of the lid for the ‘backing board’ of the lid organizer to sit against while you line-up the elongated holes in the board with the polymer female thread screw posts & put the metal screws into place. DO NOT OVERTIGHTEN. This CVPKG lid organizer also fits the 1510 and the OLDER 1535 cases. BOTH of these will require VELCRO FASTENERS. Place your order that way.Now, this is an exceptional travel/working case with only a couple of very small issues that did not require a whole star reduction IMHO. One of them is that this case seems to be in a constant triboelectric state, and therefore attracts any & all tiny lint/dust particles floating around near it when you’re putting in/taking out your gear; the arch-enemy of camera equipment. The other is that the small diameter wheels don’t roll very well on plush carpeting. But, as I already stated, these small issues are not enough of a detriment to reduce my Five Star rating.Items I fit into My Pelican 1535Air TP Case:PENTAX K-1 Body, PENTAX K-3 Prestige Edition, D-BG6 Battery Grip, D-BG5 Battery Grip, HD PENTAX-D HD 24-70mm f/2.8 ED SDM WR Lens, HD PENTAX-D HD 15-30mm f/2.8 ED SDM WR Lens, HD PENTAX-D HD 28-105mm f/3.5 - f/5.6 ED SDM WR Lens, PENTAX FA 77mm f/1.8 Limited Edition Lens, TAMRON 70-200mm f/2.8 Di LD [IF] Macro AF Zoom Lens for Pentax, Pentax SMC-M 135mm f/2.5 Lens, Pentax-A SMC 28mm f/2.8 Lens.Benro FH100M2BHF 100 x 100mm Master Filter Holder System with four Hard grad (GND) Schott B270 optical glass 100 x 150mm filters in filter frames - HD8 (3 stops), HD4 (2 stops), HD3 (1.5 stops), and HD2 (1 stop). As well as three Hard Grad ND Schott B270 optical glass 100 x 150mm filters in filter frames - HD8 (3 stops), HD4 (2 stops), and HD2 (1 stop). Plus, one ND Schott B270 optical glass 100 x 100mm ND1K (10 stops) filter in a filter frame. These are all safely stored in the Benro FB100M2 filter master bag holder with individual pouches.B+W 82mm XS-Pro HTC Kaesemann Circular Polarizer, Benro Ultra-Slim MACPL95 Polarizer for the FH100M2BHF Master Filter Holder System. Two Universal Quick Release L Plate Bracket Arca Swiss design, Universal Quick Release 150mm Long Plate Arca Swiss design, Four Pentax D-LI90E rechargeable Lithium-Ion batteries, two Pentax 1860mAh Lithium-Ion battery chargers, two Wasabi 2300mAh lithium batteries, one Wasabi charger. Two standard, two prong 120VAC modular wall outlet power cords for chargers.Set of six step-up rings 49-77mm, 58-77mm, 62-77mm, 49-82mm, 58-82mm, 62-88mm. Hoya 49mm HD Hardened Glass 8-Layer Multi-Coated Digital UV Filter. Hoya 58mm HD Hardened Glass 8-Layer Multi-Coated Digital UV Filter. Hoya 62mm HD Hardened Glass 8-Layer Multi-Coated Digital UV Filter. Hoya 77mm HD Hardened Glass 8-Layer Multi-Coated Digital UV Filter. Hoya 82mm HD Hardened Glass 8-Layer Multi-Coated Digital UV Filter. Altura Photo 77-82mm Step-Up Ring Adapter. Hoya 82mm HMC UV Slim Frame Multicoated Filter. Altura Photo Lens Cleaning Kit. Seven Microfiber regular cleaning wipes. One extra-large Microfiber cleaning wipe.One 64GB iPad mini, iPad wall charger with USB x iPad connector cable, Mini-Mag flashlight, +3.25 power magnifying glasses, Pentax Wireless Shutter Remote ‘F’, (2) pack 1620 silver nitrate batteries for Pentax ‘F’ remote, Case Logic USB Holder Case (for holding Pentax Shutter Remote ‘F’), Coleman map compass, disposable utility knife, TARGUS universal card reader & connector cable to USB, Deluxe Pentax Camera Strap, Arca Swiss Wrench, Original Benro Quick Release Plate for G3 low-profile head. Total Weight 36lbs. (16.33kg)

This is my airport go-to case for travel. It fits in most planes overhead bins, except for the really dinky overhead bins.This "AIR" version from Pelican is noticeably lighter if you have the standard version case side-by-side to compare them. That is a total win for traveling.the wheel set is nice for rolling across an airport and the case is small enough that it will go on the escalator with you, no problem.It will work as an impromptu seat for yourself when you arrive at your gate and all the seats are already taken---close the handle down and take a seat on your case. Yes, I do this quite often. It is not the most comfortable seat you will ever experience, but it is awfully available.I buy my cases withOUT the foam because I constantly reconfigure what goes inside the case(s). But this one is for sure available with foam, or you can add it later.There are two different style latches for these Pelican cases. The case illustrated here has a little button in the center of the latch which makes it easier to open. PLEASE TAKE NOTE---only one in five TSA agents know how to use this latch---if they want to inspect your case, they will try to open the latch by flipping it open, you will need to show them the button that needs depressed to correctly open this style latch.If you have never owned a Pelican case, it is worth noting that pretty much everything on the cases can be replaced. On one of my larger cases, I have replaced the wheel sets multiple times.. not because they are made poorly, but because I abuse the heck out of them, rolling the cases for miles over various terrain and the case loaded down. I have replaced latches from when a TSA agent broke two of the four latches. You can replace the foam as I already mentioned. The handle assemblies can be replaced. The point it, these cases are designed to remain in your service for as long as you need them. I think that is a seriously great feature and should not be overlooked.If you are looking for a hard shell case to stow in the overhead bins of airplanes, this is the one you should be looking at.