






Desertcart purchases this item on your behalf and handles shipping, customs, and support to Hong Kong.
⏰ Never forget to switch off—save energy, save money, save the planet!
The ENERLITES Countdown Timer Switch is a UL-listed, in-wall device designed to automatically turn off bathroom fans, lights, and motors after a preset time between 1 and 30 minutes. Compatible with LED, CFL, incandescent bulbs, and motors up to 1/4 HP, it requires a neutral wire for installation. Featuring a sleek, screwless design and a blue LED night light, it enhances convenience, energy efficiency, and safety in any modern home or office.
















| ASIN | B00IB0ZJXE |
| Actuator Type | Push Button |
| Best Sellers Rank | #4,452 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #5 in Wall Timer Switches |
| Brand | ENERLITES |
| Brand Name | ENERLITES |
| Circuit Type | 1-way |
| Color | White |
| Compatible Devices | Ventilation fans, ceiling fans, motors, lights (incandescent, fluorescent, LED/CFL bulbs) |
| Connectivity Protocol | 4: Wiring Required: Hot, Neutral, Ground, Load, Standard AC Electrical Connectivity |
| Connector Type | Wire Leads |
| Contact Material | Copper |
| Contact Type | Normally Open |
| Control Method | Push Button |
| Control Type | Preset Time with Manual Override |
| Controller Type | Standard AC Electrical Control, Wiring Required: Hot, Neutral, Ground, Load |
| Current Rating | 15 A |
| Customer Reviews | 4.4 out of 5 stars 6,991 Reviews |
| Global Trade Identification Number | 00883951412838 |
| Included Components | Countdown timer switch, Screws, Installation Instructions, Wire Covers |
| International Protection Rating | IP00 |
| Item Dimensions | 1.7 x 1.47 x 2.75 inches |
| Item Type Name | ENERLITES Countdown Timer Switch for bathroom fans and household lights, 1-5-10-15-20-30 Min Settings with Manual Override, Always On Blue LED, Neutral Wire Required, UL Listed, HET06A-R-W, White |
| Item Weight | 0.27 g |
| Lower Temperature Rating | 32 °F |
| Manufacturer | Top Greener Inc |
| Material Type | Polycarbonate Thermoplastic |
| Model | HET06A-R-W |
| Mounting Type | Embedded |
| Number of Items | 1 |
| Number of Positions | 1 |
| Operating Voltage | 120 volts_of_alternating_current |
| Operation Mode | ON-OFF-ON |
| Part Number | HET06A-R-W |
| Specification Met | UL |
| Switch Type | Push Button |
| Terminal | Spst |
| UPC | 883951412838 |
| Unit Count | 1 Count |
| Upper Temperature Rating | 131 °F |
| Wattage | 800 watts |
P**0
Blue and Bright and That's Alright! (Oh, it Works Great)
I bought this to replace the switch for a separate exhaust fan in a guest bathroom because that other one was driving me crazy because of how inconsistently it worked. This one thus far, is not a problem. It works very well. The buttons are very responsive. I like the fact that you get double LEDs. One for the actual timer button and the other one for the power button and when you touch the power button, it goes off on the power button but the LED for the pre-selected timer button stays on. I only tested one timer button but it was accurate within, I would say, a half a second as to when I turned it on and when it went off. As far as those LEDs... They are bright! And the color is almost like blue lava flames if you've ever seen those, but that's okay. If you are sleepy and you go into that bathroom at night, you won't have any problem finding your way around even if you don't turn on the actual bathroom lights. The construction seems solid and because this one has its own wires, you can just connect the wires to the existing wires in the box. This would make the installation easier for most people I would think. As far as the fit is concerned, this is about the standard size you would expect for a timer switch.
D**D
Seems to work well, mostly
Seems to work well, mostly. Sometimes there are issues getting the buttons to register and you need to press them multiple times to start the timer. The blue LEDs are bright and can serve as a dim night light in a bathroom. I have these in each of my bathrooms. They are very stylish with our room decor. They run a bit warm to the touch. I am guessing that it's some resistor in the circuit that they are running hot for current limiting or voltage reduction. I used these to replace similar switches from a different manufacturer that ended up burning out at about the same time in my bathrooms. I took them both apart and found a couple of parts that were running warm/hot, as the circuit board and the parts had charring. I repair electronics and these were beyond repair. The replacement parts were more than a new switch costs. Pay attention to the variety of timing options so that they fit your needs. Similar switches from other manufacturers have different timings that you may or may not prefer. I liked this one the best. Easy, standard installation as any other light switch. You may or may not be able to install these yourself, due to building codes in your area.
K**Y
Lights stay on
I put this switch in yesterday. The switch seems well built and worked as advertised. The led lights stay on and are very bright. If you need or want a night light it would be great. The lights were to bright for us and I will replace with a switch that lights go off when not in use.
V**A
BBB
Excellent timer switch! I bought it 7 years ago, and it has worked perfectly ever since. You can set the timer from 1 minute up to 30 minutes. Very reliable and easy to use. I highly recommend it!
A**.
Works great!
I've had the same one in my bathroom about 10 years now, works as good as it did when it was brand new. Love the blue LED's! You can't go wrong with this switch/timer.
D**T
It's Still Working!
Installed in an office bathroom where it gets daily use. It's been a year and a half now and works great. I definitely recommend it. Note that it is very large so if you have smaller older junction boxes, it is a real pain to install (and sparkies might charge more for that).
C**E
Great timer but stopped working
I have 3 of these installed for bathroom fans - work great so far. But another I had installed just didn't work, so I got a new one. Initially it worked except just once, but then worked fine for about 4 months. Then it stopped working again and won't wake up. Disappointing.
E**D
Nice product.
Been using these for years. Work well for ven fams.
C**E
Fully packages, and no issue when installing
Arrive brand New, haven't installed all however easy to install and looks nice. Cheaper than buying at local home store, cost around $28. I would recommend seller
F**U
Solve the problem of forgetting to turn off the switch
This delayer is very good and solves the problem of me often forgetting to turn off the bathroom ventilator fan. The blue indicator light can play the role of indicating the switch position at night. Much cheaper than physical stores.
R**.
Very Nice Bathroom Fan Switch. Looks & Works Great! No Regrets. Love It.
Looked high & low for a reasonably priced ivory bathroom fan timer control switch. This seems to fit the bill just right. What I love most about it is you select the time to run, & then just use the on/off after that over & over again to control it. And really, some people have gone on about the brightness of the 2 blue lights that's on this model: 0 to 30 minutes, that you can't turn off. But, I really don't find it all that bright. They have another one from 0 to 4hrs. that you can program the lights off if it's really going to bother you. I called the company before buying to find out the depth it sits in the electrical box, as I couldn't find the info here, or even on the manufacturers web site. I'll share it here, as the courteous young man on the end of the line was kind enough to measure it being 1.5 inches/3.81 cm deep from the setting ears to the back/bottom of the switch. It fit without any problems & room behind it to spare in the electrical box. Also, yes you need a neutral wire to make it work properly, but this isn't an issue if wired between the circuit breaker & the fan it's going to control, meaning, a power in black(power)/white(neutral)/ground to the switch & a power out black(load)/white(neutral)/ground from the switch to the fan. If the switch is after the fan on the circuit & at the end of that run then you'll need a black/red/white/ground to control the fan & for this switch to function properly. If not practical to change the wiring if the latter is the installation then a mechanical/spring wind up is your better option which in my case, this switch has replaced.
G**A
Lo que andaba buscando
Los utilicé para los extractores de baños, usados como timer. Traen piloto que se mantiene encendido siempre.
T**R
Buen producto, pero ahora caro
El producto funciona bien, pero veo que el precio ha aumentado 3 veces en las últimas semanas.
Trustpilot
1 month ago
1 month ago