Creality Official Hyper PLA Filament Red 1KG, 3D Printer Filament for High Speed Printing, Durable and Resistant, Smooth, Overhang Performance Dimensional Accuracy +/-0.03mm, 2.2lbs/Spool

Absolutely the best filament for my printer (K1C) well packaged and neatly wound. Quality is superb and prints flawlessly, does not jam and flows as expected. Highly recommended.

This filament is fantastic. The carbon fiber infusion creates parts that are incredibly stiff and strong, with almost no flex. It prints almost as easily as regular PLA but delivers a much more professional and durable result. The finish is beautiful and hides layer lines well. Just remember to use a hardened steel nozzle! For functional projects, this is now my go-to material. Highly recommended!

This my go to filament. Never have a problem with bed adhesion with the regular plate and gluestick. Produces really really tought parts especially if you crank up the infill. Just finished this part for a TT bike to hold 2 drink bottles. The resut is fantastic - the bottle cages were also 3d printed with the same filament.

3rd reel been great, no problems until this final reel! Wound so poorly. It keeps pulling out of the printer rbecause its stuck UNDERNEATH the filament in the reel. Only way around it is keeping the filament loose. Not good for hours of printing. Shame

This is such nice filament, the finish it gives hides the layer lines and it pairs so well with the K1C printer, printing at great speeds. Only down side is the price but if its something that needs to be strong and look nice this is what you want! The prints are nice, durable and have excellent bed adhesion. Quality stuff.

The Hyper PLA-CF filaments have become my new favourite for general-purpose printing with my K1C Printer. Prints like a dream at 0.4mm nozzle, 0.2mm width at 300mm/s, no stringing, no bother whatsoever. Prints are strong and stiff (For PLA).I've found that while this filament seems to print fine straight out of the packet, there is still some moisture to take out with my dryer, which shows typically around 32% moisture at 50C and comes down to around 17% after 8 hours of drying, which is more than dry enough for flawless printing.I've tried Black and Purple so far, with the purple being a very nice deep purple, and black being... well, black.

Have been using Creality's Hyper PLA since I got my Creality K1 and it has been perfect! There's minimal stringing, and the colours always look great! To get good adhesion I put a glue stick on the build plate before printing, and every now and then, clean it off and reapply.

Creality was always 1st to, but since the last order I will not touch the white Hyper PLA with 2m pole. Absolute horror to print anything with it. I wasted half of the spool and hours to try to calibrate flow but without any luck. It run like water even on 190C. At the end even the nozzle give up. Only good come from this is I find out that the hot end coil was loose I can only guess it happened due countless nozzles cleaning during hours calibration so end up buying upgraded k1c hot end and spoiled my K1C with DXC extruder.Plus using Creality slicer the Hyper pla has generally longer print times then cr pla. What I see to spend extra money on Hyper pla is waste of money. Best time to test different brands.

I am using 3D printing for robotic parts and i very care for the strength of the material and the layers quality , i am trying many brands , so far this hyper pla is greatThe finishing is good if your printer is goodAnd the parts are stronger than ABS .

Comme d'habitude, aucune surprise : du filament Creality utilisé dans une imprimante Creality, ça fonctionne à coup sûr ! Ce Hyper PLA vert s'imprime à merveille, les couches sont régulières, pas de wrapping ni de buses bouchées. Le rendu est top. Une valeur sûre pour imprimer les yeux fermés.

De buena calidad

PLA de qualité. Rien de négatif sur la qualité d'impression après 14 kg d'impression. Toutefois lors du dernier achat une bobine était défectueuse avec un disque cartonné mal collé sur l'axe et donc un rouleau qui s'est déroulé lors de la sortie du plastique. Déçu que le service commercial de creality n'ait pas fait un geste lors de ma commande suivante.