PCCOOLERCPS Mini I100 Pro Mesh GY Mini ITX Case, 7.5L, 2.7KG, 1.2mm SPCC Frame, Leather Handle, Supports SFX Power Supply, 2 GPU Slots, Enhanced Cooling Mesh, 300mm GPU, Compact Mini ITX Gaming case

Excellent case for the money. Easy to modify. Here I converted it into 12VDC and added a OLED 2560x1600 touch display to the front. I used 10mm standoffs to allow air to pass underneath to the GPU. Used it continuously at 99% GPU for many hours at 85% fan speed with great results. I made a leather cover with magnetic strip to cover the display when transporting and added to powerful magnets to the other-side to attach mini gaming keyboard, as well as the magnetic ring to the front to attach my gaming mouse, or my iPhone or other smart phone with ring magnet or strip to attach while you are gaming.

Once you get the computer built, it looks great. However, I ran into some issues while building mine. The internal power cable from the back to the power supply wouldn’t fit into my seasoning focus power supply. I had to cut a small amount of the plastic off for it to fit. The side panel on the motherboard side got difficult to put back in flush after mounting my power supply, and the motherboard screws are actually a different size than the standard ones, though they do still come with the case, so it’s not much of a problem. The handle was slightly different than in the picture and it feels a little loose, but it still works. Overall, looks great, and works just fine

This case is for those of us who are totally committed to building the smallest possible PC. Don't be surprised if your CPU fan sticks out, making the idea of a nice clean box impossible because you'll have to remove the side screens.I wish the manufacturer would have allowed about 15mm more width on the chassis.The GPU also will not fit if it's a modern, powerful GPU. My Asus Dual is a really a smaller form factor card and it does not fit, width wise.If you're going to use modern, power-hungry components, this chassis is simply too small.Also be sure you buy a very long riser cable for the GPU. I tried to make it work on a 200mm cable and it was too short.Had they made this case just a couple centimeters larger it would have been a great case. But sadly I have to return this and find something else.

Love how it looks.

I normally don't care to leave negative reviews but honestly this case is junk and even if it was $30 it would still be junk. Mine had a dent on it but that could be forgiven the air flow of the case itself is a joke there is not enough ventilation even though they claim it's vented it chokes off the air. The part that really ticked me off is the lack of an included riser cable and I knew that going into it but I had plenty but this does not use a standard riser cable that most cases use and that became a nightmare where the case is just absolute trash. It's a knockoff and it's a bad clone of much better cases and if you're looking for this I advise spending the extra money to get a case that's not a terrible version of a clone.

si es jugar lo que quieres esto no sirve para eso ya que tiene la peor ventilación, el aire caliente no tiene por donde salir, y tampoco tiene como ponerle un ventilador adicional

It really needs at least one fan to exchange the case air. I mounted 2 - 90mm x 15mm fans on the bottom and taller feet. I has done wonders for the temps.

I got mine for around $43, at the time there's not a case that can compare haha it's perfect for budget builds. It's not standard length so measure GPU beforehand. Super easy to build in. I have no complaints it's perfect for the price even hits the RGB tickle