Titanium Pry Bar, Pocket Multi-tool,EDC Tool | EDC Multitool Titanium Companion for Men,Versatile Pry Tool, Bottle Opener, Wrench, ratchet screwdriver,Crowbar in One

I love this thing! It works well, is relatively small, and super convenient. It's well-made and takes a beating. I bought a bit set to expand its utility and added a P-38 can opener, which is held in place by the magnet. I can use the can opener to help secure the bits in place so they don't run away while working. The adjustable wrench is stronger than I thought. I was worried I might break it by over-torquing a stuck bolt I had to remove, but the bolt broke free, and the ResafeLy was ready for more. The only issue I have is that now it's one more tool in my EDC than my pockets can handle, but I just won't give it up.

The tool is what it is described as. I have used the prybar and the Phillips head screwdriver, both are rock solid and the quality of the rachet for he screwdriver is good and seems as if it will hold up well. Being titanium it's light to carry and a very convenient size. The spring clip is strong, and makes it convenient to clip onto a pack or belt loop. The bottle opener works too. Ita a nice, sleek design and a handy little tool that I think will last a long time, in fact I'm more likely to lose the screwdriver bits than I am to wear the tool out.

Initially I thought the ratchet didn't work because it was so stiff. The ratchet is still very stiff after manually trying to wear it in, to the point that if you're trying to screw something light in, you have to hold it while trying to retchet. That's my only real complaint. The magnets hold the bits in fine but theres no real cutout to make them easy to get out. To get them out I push down on the tips and then use my nail on the shaft. The wrench works but I'd rather just carry a small crescent wrench. The pry bar is definitely useful every time I carry it I find a use.

Love this. I live in the bush and I use it all the time. No more broken blades on my weatherman from prying and the ratcheting screwdriver allows access to screws my weatherman can’t due to small space.

As a pry bar it removed paint can lids easily. That's its sweet spot. I also used it to remove small masonry nails that held carpet edges to a concrete floor during a remodeling project last weekend. It took about 5 - 10 minutes per nail. I gave up after 2 nails, switched to a 12" crowbar, and removed the same nails in 1 - 5 seconds. Maybe if it had grooves on one/both side/sides of the prying section, or tapered to thinner material in the prying section's slot similar to a 12" crowbar, it could grip better and pry the nail more easily. As a wrench: at first I could not loosen a 3/8-inch hex nut with it because the spring that holds the jaw semi-closed was not strong enough, thus the wrench would slip off any nut I tried it on. However about a week later I discovered that if you make sure the angled section of the spring-loaded "jaw-bone" is seated firmly on the "corner" of the hex nut, it gripped decently and was able to remove small (up to 3/8") nuts fairly well (though the serrated jaws did mar softer metal). I haven't tried on nuts near it's max size limit, but will as the opportunities permit. Obviously job-specific tools (i.e. sockets and dedicated wrenches) work better, but given this fits in my front pocket and is almost always with me, I'm happy to have something that works in a pinch. Finally the screwdriver bits: they're attached to the tool via a magnet, which in my tool's case was not strong enough for the flat-head bit, thus I lost that the first day. The phillips-head bit is still around, but it too fell out more easily than I'd like. I stronger magnet might be nice, but then it'd grip other tools in my pocket (i.e. knife and bolt-action pen), so maybe some type of retention spring instead? Oh, and the ratchet interface with the screwdriver bits on my unit did not have a detent (or other type of retaining mechanism) to keep the bits in place, so I had to hold the bit in place. Still they work on standard 1/4" screwdriver bits, so replacements are easy to find. Overall I was initially disappointed, but after learning how to use the tool more effectively, I'm satisfied enough to carry it daily, and that's the point.

Carry this every day. Had a friend ask me how many times a day could you possibly need a mini crowbar. The answer is at least once a day! I find myself using this thing daily to pry something or even cut something open with the edge. Its held up amazingly under my abuse! Fits right in my small pocket in my jeans. Buy it, use it, zero regrets.

Every couple hours I find a new use for this thing. Easily the most versatile tool on my person. I wish it came with a belt pouch but other than that this thing is great

Would be nice if the bits were a little thicker in the front so they don't just go unsupported on the back while in the ratchet. It's impossible to apply any pressure... Another solution would be something to block one of the ends of the ratchet while in use. Otherwise it's great! The magnet isn't the strongest so I would have liked to also have a rubber band or something to keep them in place, but it's still nice

Great bit of kit super light and strong more useful and functional than I was expecting

Handy tool used the wrench and prybar several times so far no damage or scratches seems pretty strong.

El producto es muy util y funcional. Ideal para tu edc

It’s fine, but the pry side is useless as it doesn’t come to a point and it too wide to fit in gaps.

Edited Review: changed to one star, not as advertised, item is not made of titanium, its steel and magnetic. However the ratchet for the screwdriver bits isn't great, very coarse and uneven mechanism. The screwdriver is difficult to use ad theres no retention for the bits while in the ratchet so they fall out very easily.