Question 1

can this be laser cut?

Accepted Answer

The only main issue with laser cutting is the heat which might deform the edges and distort the mirror. What shape do you want to cut it to? We would tend to use a flatbed router cnc machine to cut this with a clearcut router bit that gives a polished look, not high polish though but a nice edge, usually edges are covered in a window frame etc so edge finish isn't usually an issue. You can email us with details sales@esupplyline.com or 01953 711 881. We also stock this in 6mm. The brand is Plaskolite which is the manufacturer that has that image used in the listing, I don't think it specifies the brand anywhere so check with suppliers what brand they are supplying.

Question 2

If i use this in a large size and place a small monitor behind at full brightness in a dark room would i basically see the tv area through the mirror?

Accepted Answer

Yes, you will be able to see the display behind the mirror even in daylight, but it is better in the dark.
 I used this product to build a magic mirror and the results was better than I had hoped for.

Question 3

This might be a stupid question, but does it matter which way round you install this mirror?

Accepted Answer

Yes it does, one side is coated and is normally on the inside of where you are using it to protect it, the other side is just the acrylic, one way to tell which is which is that the coated side due to how delicate it is the protective film is barely hanging on, you can pretty much blow it off, bit of a pain when sawing or cnc cutting it, or storing it because if stored standing up the protective film can just fall off under gravity, the face of the product is just protective film onto clear acrylic which is stuck on much better, there is an obvious difference between the 2 and I would use that on the side you use to protect the product. Cleaning acrylic can be a pain as even some cloths can slightly scratch it, here when I clean a piece to check anything I liberally spray with furniture polish, use a typical duster and very lightly wipe over it rapidly back and forth until the polish has pretty much gone, all clean and no marks.

Question 4

Can it stick on wall?

Accepted Answer

As Russ has said, it can but if you are just going to use it as a single sided mirror to fix to a wall or anything else then that is available https://www.amazon.co.uk/dp/B0733PH36V it can be supplied with double sided on the rear too for an additional cost.

ASIN	B01MRI4KYY
Best Sellers Rank	19,715 in Business, Industry & Science ( See Top 100 in Business, Industry & Science ) 30 in Safety Mirrors
Manufacturer	Sign Materials Direct
Manufacturer reference	3SILVERSEETHRUMIRACR

3mm Two Way/See-Thru Mirror Acrylic Sheet 15 SIZES TO CHOOSE (210mm x 148mm / A5)

Description

Specifications

Common Questions