Top and Bottom Bearing Flush Trim Router Bits 3/4'' Diameter 1/2" Shank 2-1/2"L Straight Woodworking Bit with Bearings

I’ve only used it once on a batch of 65 small panels but it worked really well. I just ran around 1/2 speed because of the weight of the bit but I really liked it. It was good and sharp without vibration.

Bit cut great initially, however dulled relatively quickly.

I couldnt rate it higher as it was a great bit but since I have a 1/4" router it wouldn't work. Was packaged well and was nice and heavy duty but as I said, sadly it wouldnt work for me

Good bit, I used it on 4x6 pine for a pergola rafter

VERY PLEASED !

Works great. Very heavy duty for flush trimming thick material.

I gave it 2 stars because it looks cool, this was the largest flush trim bit I have ever seen! Mine is diffrent from others that posted a picture, but clearly functioned the same. Was flush trim cutting a undermount sink and it immediately chipped and took a huge chunk out....smh. it ruined the cut. I had to use epoxy to fill in the damage it did to my customers $1,500.00 island top. Hopefully I just got a crappy one and they send me another and it works better, will practice on a scrap piece.

I order one of these and didn't really look at the bottom bearing before I used it. I made one pass at an edge and got about 19" before the bottom bearing completely disintegrated. Amazon was great and got me a replacement in two days. But when I inspected the bit the bottom bearing was already coming apart before I even used it. There must not be any QC for the manufacturer. DO NOT BUY THIS PRODUCT!!!!!!!!!

i tried it it worked great and as it should work

Excelente producto

The 3/4" flush trim bit with 2 1/2" length and 1/2" shank arrived as described. The case it arrived in was very thin and lacked integrity, but that was not why I bought it...anything to keep costs down works for me. There are 2 different hex head set screws and no allan keys provided (And none were advertised). Again, not a deal breaker, just an observation. After reading some of the other reviews, I wanted to make a serious review to clarify some items I would have like to know. The top bearing (opposite the shank) was mounted snug and in place, hex head screw was tight, no unintended movement. The bottom bearing was heeld in place with a collarwhich was not mounted properly. I did have to adjust it tighter to the cutter, and there still remains some up and down wobble in the surface of the bearing, but no side to side movement. Seems to be a poor quality bearing, or possibly undersized ball bearings inside. Since this bit had 2 bearings, I wanted to try testing if the blade edges lined up proud of the bearings, and I did it by draging the bit on a planed piece of wood. The blades do extend past the bearing, but it is beyond reasonable, less than 1/128", which to me is all I could expect. The 1/2" shank fits perfectly in the router base. After installing the bit, in a router table, I turned on the router and found that it is noticeably louder but does seem to be well balanced. I'm thinking the louder noise comes from vibration, but there does not appear to be any imbalance or shaking, so I don't know what brings about the louder noise. i bought this as part of a guitar body project, so I had to test this on a 1 3/4" thick slab of Ash. I did notice in other comments that the bit destroyed some other users work, so I tried to go with a very light trim , less that 1/8" and I'm glad it was on a router table. Due to the amount of surface contact, at 1 3/4" depth, I would have to consider this way too much for a hand held router. It cuts nice but there is an incredible amount grip into the wood when trimming, and it's has to be stressed do it in multiple thin passes, of 1/16th" or less and don't rush. The bit stayed sharp and did it's job. I don't think it's a high end bit, but at this price it's has great value. I don't recommend it for professional use where it may be used more often, but for a weekend warrior or hobbiest, this gets a thumbs up.

Me llegó muy bien se mira de buena calidad si es la medida que dice ser y se siente con buen filo, me llegó en su caja protectora para su cuidado

Muy buena calidad y cumple con las especificaciones, excelente para cantear tablones, comparto la foto, porque es enorme la broca, para dimensionar su tamaño la comparo con una broca recta de 1/4 de pulgada