Zalman P30 Micro-ATX Case, MATX PC Case with 3 x 120mm ARGB Fans Pre-Installed, Panoramic Frameless Tempered Glass Front & Side Panel, Type-C and USB 3.0, White

It looks good the side fans are reversed so they come shipped as intake fans Really easy to remove side panels and dust filters the top is plastic but the rest of the panels are metal, I don't personally mind this but you might WARNING REGARDING THE FANS the argb cables are daisy chainable, but not the DC fan cables yes I mean DC not PWM, although the amazon page doesn't say, these fans are in fact DC connectors so depending on your motherboard I would consider buying a fan hub because this case does not come included with one (and to those who need it you can still plug the DC connectors into a 4 pin SYS_FAN on your motherboard)

I’ve done many cases over the years. Thermaltake. Antec. NZXT. Coolermaster and many more which i do not wish to mention them . I’ve always found myself going back to Zolman , as they have excellent layouts and everything you’d want in a case, You can feel the material such as glasses, body and cables, overall i am satisfied with this case, the ARGB lights are so bright and shiny compare to other cases similar to this , Lots if space on the backside for SSDs and 3.5” drives if you are still rockin’ those.Motherboard installed easily, lots of airflow and barely audible even with 10 120mm fans. The bottom has a nice slide out screen mesh which acts as a filter. There are no screws on the case that holds the front glass, side glass or side panel, it's all snapped in making access quicker and easier. I would say , Nothing to dislike about this case.

I upgraded my case from a standard ATX to this micro-ATX case. Though Zalman does not have a lot of resources online, this wasn’t a problem! Building in this case was a breeze. Sometimes the rubber grommets would fall off, but it wasn’t a huge deal and easy to reattach. I appreciate the panels as well, they are beautiful! The cable managing in the back made it soooo much easier for it to not look like a rat’s nest back there. Fans were very easy to figure out and it came with their own splitters. Love it! Great mix of beautiful aesthetics and functionality. Temps are great as well!

Compact and very sleek looking case with great cable management. My last build was with an extended ATX tower case, and this case actually has significantly more room to install my video card and AIO. Love everything about this case!!

I honestly would’ve liked to give this case a much higher rating than it deserves, but I don’t give anything 5 stars. First day after I finished building my newest pc. Pros: -case is beautiful, preinstalled fans are reverse-bladed. -Very good airflow. It can fit large and beefy cards like an ASUS TUF 4080 or 4090. -It is quite wide for an mATX case but small enough to not fill up space on your desk. -It is also long enough on top to fit a 360mm AIO -The price is very attractive. Perfect build for under $100. Budget pc cases have come a long way -Case also only comes with a front panel power switch and Power LED +/- cables so you don’t need to worry about reset or hard drive activity cables. -cable management is very easy and clean in this case with many pass-through holes designed to tie down pesky fan hubs, RGB controllers, and power supply cables. -has several pass-through holes to create a seamless invisible cable look. First PC case I've ever seen this in. Cons: Probably the weirdest building experience. -Not all of the standoffs come out of the box installed. -It has 6 out of 8 motherboard standoffs installed (no hole for a 9th standoff hole on the bottom right-hand corner) -the last 2 are included in the baggy. But, I wish I had the foresight to install them before I screwed in my motherboard, so I had to unscrew my motherboard and screw in the last 2 standoffs. Major annoyance. -there’s a lot of zip ties and plastic wrapped in the cables. Just use a needle nose plier to cut it off because unless you have smaller hands it sits on top of the hard drive cage and I couldn’t wedge my hand between the gap to unwrap the plastic. Conclusion: highly recommend this case to anyone seeking a mini mATX form factor that is also big enough to fit anything they want with upgradability, great airflow, and doesn’t break the bank like some other brands. Zalman doesn’t slouch.

Absolutely stunning case. Built my first pc and I think this case was the best one I could’ve chosen! Perfectly sized for my space, good material, beautiful design, and allowed me to have space to hide all the wires!! You won’t regret getting this amazing case!

Had this case for two years now and I still love it. My only complaint is that they put the power button too close to the usb port so when blindly trying to plug something in there is the slight risk of turning off your PC. Even so, this is very sleek looking and has served me well. I will continue to use it for a long time!

Best case I've ever owned (out of 3) Love the psu placement Love the cable management ports and space Perfect size for an mATX board Perfect fishbowl, space for 360mm radiator, low price What more do you want? 5 stars

I never would have done a mini, but my fiancée wanted cute, so here we went. The materials are pretty alright, cable management was a breeze and comes with great sized rubber grommets to help hide all your ugly cables. Air flow? This thing has NEVER blown hot .. or even warm .. the air flow capability is beyond exceeding my expectations. Blows my full tower out of the water. Cosmetically, the glass is so clear you will forget it's even there. All in all 10/10 would buy again, would have got myself one too if I didn't have an EATX board.

Excelente case. Las terminaciones son muy buenas, incluye cubiertas de goma para ocultar los cables. Tiene filtros magnéticos en todos los ventiladores. Me encantó la mezcla de color negro y blanco.

Es un excelente gabinete, teniendo en cuenta que se pueden agregar hasta 9 ventiladores, la estetica es bonita y los materiales de construcción son de buena calidad Este gabinete fue una excelente opcion, ya que quería optar por el Hyte Y40, pero nunca me convenció la montura horizontal de la grafica, y además, sólo tenía espacio para 7 ventiladores y siendo mas caro. El único pequeño problemita, (si tienes una gráfica un poco gorda, es que probablemente los ventiladores de la parte inferior lleguen a tocar la grafica, pero es algo que se puede resolver con ventiladores delgados.

Fiz o pedido e o mesmo veio direto dos Estados Unidos. Chegou muito bem embalado, sem nenhum tipo de escoriação e correspondeu às minhas expectativas. Já vem com 3 ventoinhas pré-instaladas, o gabinete tem possibilidade de retirar painéis laterais e frontal e também a superior para limpeza. Tem espaço suficiente para fazer um setup limpo e bonito, perfeito para mATX ou ITX. Um ponto de melhoria seria mais usb na lateral, no mais para mim está ótimo.

spazioso, pulito, permette un ottima gestione dei cavi e dello spazio. temperature sotto controllo e qualità costruttiva ottima