ECO-WORTHY Linear Actuator Motor Controller, Remote Positive Inversion Control Kit for Linear Actuator, Forward Reverse Remote Control System 12V DC

Works great for controlling my line actuator

It does what it says it does.What more can you ask?We used this to replace a defective somfy module.

A linear actuator remote.

The unit is fine and functions as described.I am writing this so others can understand what is needed if you want to use two limit switches to control the extend and retract limit using the M and N terminals.You will need two NPN NC limit switches and two diodes (I used 1N54xx diodes I had on hand).Wire the brown wire from your sensor to the + input power to the controller and the blue sensor wire to the - input controller terminal. The black wire from the sensor goes to the M or N terminal. The M terminal controls the extend limit and N controls the retract. Between the sensor and M or N terminals you need to put your diode so current can only travel to the controller. When the sensor is tripped it will open and travel will stop, you can then press the opposite direction button, A or B and it will travel until it hits the other sensor.I incorrectly assumed that there would be an internal diode and had trouble getting to work until I diagnosed with a multimeter.Anyway, I hope this helps someone.

The electronics on my recliner malfunctioned. This was a perfect fit and easy to wire. Now I have a wireless recliner!Function example:-Single click A, it auto extendes all the way. Same with B, reverses action.-Single press either A or B, then tapping again stops/resumes the motion in between.Hope it was of some help.Enjoy!

Gave out after 1.5 months, doesn’t reverse polarity anymore so will only move the motor in one direction now…Update: reached out to their customer service, they initially reacted with “we’re sorry, please provide order number” (literally with this sentence only…), which I did, since then dead silence and no reaction to follow ups.

Found it to be intermittent using the supplied transmitter. I tried different distances but always the same. Returning for replacement and will update when I get the replacement. UPDATE... The replacement came in and does the same thing.The problem is that there's a delay between the button being pushed and the receiver processing the command so you need to long push each button. For example, if you press and release as you would your tv controller it misses about 30% of the time. To fix it, you need to long press the buttons so each push needs to last a full second. Then it hits each time.The reason this is important is that in my application I don't see the roof vent opening unless I go outside.

This controller worked straight out of the box! No programming just wire it up and go! I highly recommend!