BTF-LIGHTING SP530E 2.4GHz WiFi Bluetooth LED Controller for Smart Home

I used this video for their led strips review, so here you can have an idea of what this controller and its app is all about! Lots of settings, gradients, effects, it is an endless amount of fun I have been having! I never get old of these. 😂 I've had this product for a while and it still works flawlessly. No complaints and would- no- WILL buy again! My favorite thing about this is the music mode. Capturing the sounds is accurate, you can control which part of the led strip(s) get to be on and have different effects of the same led strip(s), you can give them different colors and gradients, you can control the sensitivity to capturing the noises, you can control the frequency too, there are loads of things you can do with this controller! I had no problem with paring the controller to bluetooth, but if you have trouble connecting, you can manually connect the controller to the bluetooth. I found out when I tried connectint them but it didn't work, not even manually. Turns out I forgot to connect the led strip to the controller. :')

The SO530E is probably the most versatile controller on the market and it lives up to expectations. I have two of these controllers for two zone in my kitchen. I can work each zone independently from the BanlanX app which has a few displays that can be tweaked for a PWM strip. The setup is flawless as long as you follow the instructions carefully. The execution is a delight: straightforward and simple.

Works great. Originally I was using a $5 arduino controller and although I liked the functionality of the arduino more with more options, etc. It was unreliable and tougher to set up. I decided to replace with this and it's worked flawlessly. Admittedly the app could use some work but overall a good little device. Also I cannot figure out how to save scenes although I see the option it doesn't do anything. Also if a developer is reading this review please add the lighting effect called "lightning" where it emulates lightning strikes by randomly lighting up parks of blue/white around the strips. That was my favorite from the arduino that's not included here... oh well.

I bought 6 of these for LED strips embedded in floating shelves. 2 of the 6 randomly flash or turn off periodically. Also they are very sensitive to signal strength and will not work if embedded in a floating shelf. The app works well and integration with Alexa works as expected.

The setup turned out great. The LEDs are white-tunable and RGB. The controller supports individually addressable LEDs, which allows for some great animations. And the transition between colors is very smooth! Configuring the lights was tricky, and took me several attempts to work it out. For the LEDs referenced below, I've provided the configuration that works. Connecting to Alexa was straightforward when you follow the directions, but not intuitive if you try to figure it out on your own. Below are the key products to this setup. - LEDs https://a.co/d/b3oDUBa - controller https://a.co/d/ijOn0iz - power adapter https://a.co/d/2iUcBzg - channel (though a tad oversized, it still works) https://a.co/d/1M9gQiV

After trying a few methods to get addressable LEDs to work, I finally decided to get an SP530E. This is by far the easiest way to control them. Setup is super simple, once you hook up the LEDs and pair the controller, you tell it how the colors are controlled (PWM or IC) and then it will turn a solid color, you select what you see, and it does the same until all colors are calibrated. Then you're all set and can select from 100+ different scenes, and it can also connect with Alexa. The only issue I ran into was no documentation on how to enable pairing mode. On first startup it's already there, but if something messes up and you have to start over, it's not clear how to enter pairing. I found that if I hold the power button as I plug it in, that seemed to work. Or maybe I got lucky. The version I got came with a 2.4GHz controller which works really well and paired instantly with the SP530E. I'm curious to try and see if it can work with multiple at the same time.

Works well and easily connects to Alexa. You can control many features of supported LED strings like color and brightness with voice. Supports both WiFi and Bluetooth.

We purchased a headboard that came with integrated LED RGB strips that were controlled by a hardwired switch and knob controller. I purchased this Bluetooth module to add wireless control and Alexa controllability to the LED strips and it worked out great. It was easy to install and setup and has worked as advertised for about four months now. The app is okay, it allows some basic control of the LED colors, brightness and the most useful feature a scheduler. So far, I am happy with the module and I will get another one down the road if I need to control any other LED strips.