🛠️ Say goodbye to rust and hello to durability!
The JENOLITE Rust Converter Spray is a fast-acting, epoxy-based solution designed to convert rust into a stable, paint-ready surface. With a coverage of approximately 2m² per 400ml, it provides long-term protection against rust, making it ideal for various metal surfaces including vehicles, tools, and outdoor furniture.
Manufacturer | JENOLITE |
Brand | JENOLITE |
Product Dimensions | 13 x 6.5 x 20 cm; 810 g |
Manufacturer reference | 89567 |
Manufacturer part number | 89567 |
Special Features | Rust Resistant |
Item Weight | 810 g |
D**N
Jenolite Rust Converter is a great product.
After a bit of research into what product was best for my needs, I opted for Jenolite Rust Converter Spray. Stone chips had broken through the paint around the arch areas of my campervan, looking unsightly. A quick rub down on the affected area with 80 grit oxide paper back to clean metal, masking tape applied to avoid any overspray, then follow the instructions on the can - shake contents for a few mins, then apply from around 25cms, leave to dry circa 15 mins, then re-apply. It's clear initially, but as it gets to work it turns black, after 2 coats a thick protective layer is formed, after fully dry / cured the epoxy feels tough and has good coverage, I'm letting it fully harden over this week, and will look to apply a top coat of colour matched spray paint, and clear lacquer top coat to blend it in, and will then apply 2 coats of the Jenolite on top of the colour matched spray paint for added protective layer as it is clear. Good product, good performance straight out the tin with minimal prep, instructions are simple to follow.
D**Y
Works very effectively, but make sure you prepare the area properly first!
This is a great product. I recently used it to treat the underbody of my 20 year old Ford Focus. It provided excellent coverage, and a good surface for paint to adhere to.However, as always with any type of paint/protector product, the preparation is every bit as important as the product itself. First, use a wire wheel and/or sandpaper to remove all the loose rust and dirt. Then use brake cleaner and a cloth to thoroughly clean and dry the area, and remove any grease. Only then should you apply the rust converter spray.Under these conditions, the spray adheres well to the surface, and forms an impenetrable epoxy barrier which stops rust developing further.Once this is dry, you can then paint it with the colour of your choice.
D**F
Well worth the money
Good stuff just the job Well worth the money
M**N
Does what it says it will
Worked really well, easy to apply. We used it to reline our dip tank. We were surprised as to how effective it was
G**H
Rust converter spray
Excellent,works well,will be buying more,thanks.
D**S
good product
easy to use ,does what it says on the tin
A**B
Better than expected
Easy to use, dried and recoated as instructed. Did the job as described, quickly, easily and stopped the rust
T**S
It's really quite good.
This seems to work really well. I gave the area a wire brushing first and then sprayed the rust converter.Happy with the results and would definitely buy it again.
Trustpilot
2 months ago
5 days ago