Apevia ITX-PFC500W Fully Modular ITX 500W Power Supply, Active PFC 90-264V

Works Good So Far, No Issues For a MIcro iTX Setup, just what I needed, you can power your Chassis FAN from the SATA chain using the MOLEX in case you are wondering.

I used this power supply in my BC-250 build and it worked perfectly. The compact ITX size made it a good fit for the build, and the fully modular design helped keep the wiring clean and manageable. It has had no issues powering the system and has been reliable so far. Definitely a good option if you're looking for a compact power supply for a BC-250 setup.

Failed after 2 years of regular usage. One day, PC would randomly crash and restart into Windows Recovery. Bought a replacement ITX power supply (a different one, not this one) which fixed the issue. Would not recommend unless you are willing to go through their RMA process, which will require you to cover the return shipping costs. At that point, just buy from a different brand since it is very likely it will fail again.

The PSU measures 165.6mm long, but because it is modular, it fits perfectly in my JONSBO NV10 case, which specifically instructs to use PSUs no longer than 150mm. One seller on another platform selling a similar PSU told me that his PSU wouldn't fit my case, yet mine has been working flawlessly in that case. And I can't stress enough the benefit of using modular a PSU in a SFF build - you don't have to cram unnecessary, unwieldy cables in very limited space. For SFF PCs, fewer cables obstructing airflow means fewer overheating-related troubles in the future. The PSU has been stable and quiet powering a SFF build with AMD 9600X and Nvidia RTX 5060LP for more than two weeks already. I will come back to update the review if things change.

it's been powering my BC250 for some time now. It seems to be working fine.

I used this PSU in a small form factor build, based around a JONSBO NV10 mini ITX case. It fit perfectly, and the cable connections are fully modular. The cables themselves were flexible enough to route in the tiny case without too much difficulty. It seems stable and not noisy, and provides adequate power. Note that with most power supplies that I'm accustomed with, the listed power rating is the total of the 12V rails. In this case, the power output on the 12V rails is "only" 396 watts, not the 500 advertised. But it is indeed 500 watts total among all rails / voltages. Not an issue for me, but figured I'm mention it if someone's trying to run a high-TDP CPU and GPU. My only complaint is I had a hard time getting the screws to grab thru the case to the PSU. They're the standard size screws, but for some reason didn't seem long enough. I was able to connect 3 out of the 4 of them, so it's stable enough, but thought I'd mention it.

I purchased this PSU to upgrade the unit inside my Dell OptiPlex 9060 tower. It didn't fit exactly, but there was enough room. It came with all the wires, minus a Dell-specific power adapter, so installation was a breeze. It's also powering a RTX 570 GPU. Overall, its a small, modular PSU with almost no noise and very little heat output. All the connections are secure and it looks nice inside my case, even if it's just loosely hanging around in there.

I was afraid the cooling fan would sound like a 1u server turbojet and thankfully it's extremely quiet at idle and at low load, basically inaudible. I'm replacing the stock 255W PSU in my dell optiplex 9020 sff and it's just as quiet as the stock psu, my power draw requirements are about 260W, so your mileage will vary. Note that for Dell Optiplex SFFs you will need a ATX 24-pin to Dell 8-pin motherboard adapter and an extension cable for the ATX CPU 4+4pin because the cable length is not long enough for cable routing as is. After using it for a month, I can say I'm quite satisfied with the build quality and quiet operation, the power headroom it provides along with the improved airflow makes it a must for anyone trying to max out the upgrade path on their prebuilt SFF PCs. Initially, I bought it to improve airflow in my cramped case and give me a real upgrade path to a >75w GPU down the line and it does both of those things really well, airflow improved so much that I can't even hit thermal throttle anymore. I did eventually end up upgrading to a 115W GPU and thankfully it's still just as quiet. The modular cables feel sturdy, they're stiff but give way when bending and attempting cable management. In my particular application, I wished the P4 4+4 pin CPU cable was slightly longer, I redid my cable management with an extension cable because routing through the RAM slots was bending the cable connectors at hard angles which I wasn't satisfied with. In my optiplex, the space left behind by the old PSU was enough for stuffing excess cable lengths underneath and out of view. By pure chance, the PSU slots in and lines up with a single screw hole where the old one went, you should get creative if you're not dealing with a standard SFF case.

Buona qualità , modulare e sufficentemente potente, uno dei pochi che ho trovato qui su amazon

too costly compared to desert cart and importing directly . product itself is working ok.

works great.

ممتاز لا يصدر صوت مزعج

I was surprised how well this power supply works. I needed a flex P.S for my mini itx case, and this fit in there perfectly. It's a modular P.S, has a small cooling fan inside but it's not noisy, very silent. I am using this for a HTPC build, just for 4K movie playback. It may be a little noisier if you're a gamer and really pushing the power supply. I don't know about the longevity of this P.S, but so far it has worked really well.