FIFINE Low Profile Boom Arm Mic Stand, Microphone Stand with Cable Management Channel, Desk Clamp, Screw Adapter for Streaming Podcast Recording, Adjustable Metal Mic Boom Arm Pink-BM88P

An awesome mic arm. Fits my Shure SM7B just fine (mic came with the adapter - the adapter with the arm would not have worked) and was easy to setup and attach to my desk. Nice and sturdy. Love the white in contrast with my purple mic cable. Also love the cable management sliders. Holds the weight of the mic no problem and is easy to adjust

=Intro=I have this Boom Arm attached to a Fifine AM8 for casual communication uses as I am upgrading my audio set-up to have a dedicated mic and headphone solution as opposed to a headset/mic combo, as the mic on my current headset is failing.=Aftersales Support=Originally when the arm came, the hand screw piece that clamps the mic down to the arm broke after I tightened it. I then reached out to Fifine Support [Rosie] about the issue, and after a few days, I had a brand new hand-screw part in hand at no cost to replace the old one, which now works and does not suffer from the same issue, so thank you for good after sales support on that.Now, as for the boom arm.=Physical Specs=The arm itself extends to a total length of ~28 inches, not including the length of your mic, which I feel is ample to position your mic roughly ~5 to 6 inches from your face even from a laid-back posture, if you were all the way pushed in to your desk. You can tighten the joints of the arm with included hex wrenches. I have not tested the tightness of the joints after tightening as that's not my use-case.The clamp itself has a very small desk footprint, taking up about 2.5 inches in width, and 2 inches in depth on the desk.The ball joint for adjusting the mic at the end of the boom arm is a bit finicky to adjust at first, as one clamp is responsible for adjusting the mic left and right, and also up and down. Luckily, the aforementioned hand-screw makes tuning this a bit easier. I've got it tightened to a point where I can adjust it with some force while tightened, but the mic still holds in place.=Cons/Feedback=Something that I wish they had added is the ability to drill the boom arm into your desk as opposed to a clamp, similar to a monitor stand. It's hard for me to tighten the arm entirely due to the clamp's position on my desk. This does not seem to be a common concept amongst other boom arms for some reason.Also, instead of a long hand screw to tighten the clamp from the underside, it would be nice if it was a cross-style or T-style hand screw so it would be easier to tighten the clamp in tight spaces [i.e, between desk legs and a drawer which is where my clamp is].I'm not entirely sure if this is due to me over-tightening it, or adjusting it while tightened, but the ball-joint's powder coating seems to be scraping off a little. This doesn't seem to affect the functionality of the mic as a whole, or the overall general appearance, but just something to note.I do feel at times the clamp or the socket (unsure which) where the arm where the arm connects to the clamp is a tiny bit wobbly if I brush it with my arm, but I would say is stable at the end of the day.=Price=I got it on sale at ~40$, however even at MSRP, this is a solid buy as a beginner level boom arm. It holds my mic in place, pushes away easily when I don't want it there. Most other boom arms start at ~70$ from the research I had done from more established audio companies [Shure, Rode, Elgato, etc] for a hanging boom arm, with low-profile options costing more. I definitely feel like that this is a very competitive pricepoint for this boom arm.

I will start of by saying for the price it's very good. But if I have to be picky there's a few things it could improve. First off it's all metal except for a few plastic pieces like the cable cover rails and the ball head tightening knob. The pink color is very good, it's nearly pastel pink like my Nintendo Joy-Con in Pastel Pink color.Installation was very easy and I really appreciate that the mount has a handle that can be adjusted so it's always out of the way. I do however find that it takes a lot of force to tighten the two arms together and keep the mic from sagging and even then it's not as tight as I would like it to be.On mine there are a few spots where the paint was scratched out of the box, the mold of the metal is also hit and miss in some spots. The my biggest issue is the plastic cable covers. I dread taking them off because they require a lot of force and EVERY. SINGLE. TIME. it ends up hurting my fingers is some way either from them getting pinched or my fingers hitting sharp metal pieces trying to remove them. They take force and are a pain to re-install.Overall it's pretty good for what you get and I would give it 5 stars if it wasn't for those cable covers. The attached picture is an example of the many areas that have chipped paint and there's a lot, that's not dirt.

This FIFINE Microphone Boom Arm is exactly what I needed! It’s amazingly sturdy, holds my mic securely in place, and has a low-profile design that looks clean and professional. One of the best features is the built-in cable management, which keeps wires neatly tucked away for a clutter-free setup. The movement is smooth, and it stays in place without any sagging. If you're looking for a high-quality, well-built boom arm, this one is a fantastic choice!

Excellent low profile mic boom for the desk. Sneaks under my monitor just like I had hoped it would. It's sturdy and moves freely. The joints can be tightened with included hex keys. Functional and easy to use. Cables can be routed within the boom arm.

I normally don't take the time to write reviews, but this boom is extraordinary, and I really wanted to write a review. I had previously had my microphones on a stand on the desk, and I can tell you that it makes so much of a difference in the sound quality if the microphone is faced directly in front of me and close to my face. The range of motion is exquisite, and it is wonderful that I can move the microphone to the other side of the desk, and it completely clears the space. The arm itself is very sturdy and amazed at how well it supports the microphone. The availability of having it move in several directions is something that I am looking forward to. I also love that the cables so eloquently hide into the arm itself. I thought that I would have to send the cord into the hole and out the other end, but I was pleased when I realized that there is a plastic cover that easily slides off and then locks back into place, making the cord so easy to install or change if need be. The arm has space of over an inch and one-half that would allow any cord to be used. I currently use a USB C, but many other types of cords could be used with as much ease. I highly recommend this product, it is very high quality and professional! Worth the money, quality product.