Mini Ice Cube Tray Set with Twist and Release Mini Nugget Ice Cube Trays, BPA Free Silicone Mini Ice Tray with Storage Bin and Mini Scoop, Stackable Dishwasher Safe Mini Ice Cube Trays

This is the best mini ice tray I've purchased to date and it exceeded my expectations! My previous ice tray made the same cubes but in a flat tray and it was a painstaking process to free each individual cube. This system is easy to fill and even easier to free the cubes. It freezes fast because the cubes are so small and it feels really durable despite daily use. Each cylinder provides a generous amount of ice cubes for a large drink. My only complaint is it does leave a mysterious white film in my drinks that I can't seem to wash or rinse off the trays but it doesn't change the flavor of my drinks. It takes up much less space in the freezer too.

Highly recommended!! Such a great product!! I will be buying another set soon!!!!!! These cups are double the size as any other brand. It's easy removal with a little warm water on the inside and out. Squeeze on the countertop and it comes right out perfectly into a cup! Compares easily to hospital ice / crushed ice Much better then buying a countertop ice cube maker! Thank you! I will recommend!

Bigger than I expected they'd be. I was hoping they'd fit in the door of my tiny freezer but they do not. So they do take up more room than I would like. I'm a household of one and I don't use ice often, so these are a good solution. I fill them up, freeze, squeeze, and put them into a freezer storage container. All together filling them up 3 times made enough ice to fill the larger container. I didn't notice any leaks. It was easy to use. Easy to fill. It was frozen in just a few hours. Releases as promised with warm water. It does leave a bit of a disc of ice at the bottom. So you will have to break that up Not sure on the value for money. Maybe it's a little pricey but the concept is unique enough and it does what I wanted (make small amounts of ice for one and easy to unmold) so I'd say I'm happy with it.

HOLY GAME CHANGER! They produce so much in the span of 24 hours! They typically all freeze after 4 hours to 4 and half hours and it is so ideal! You definitely need to fill the little cup that's in the center with hot water for a bit and around the mold, but after that it's just a lift or turn and it releases like magic! I recommend leaving them right side up because that's where the water freezes from, but other than that they're nice and cozy to keep in the freezer! Seal them up in a gallon bag and you've got an amazing abundant source of ice! The size for these are also incredible! They're quality mini cubes to the core! Very very highly recommend if you're thinking of getting any ice mold for mini ice! Super affordable too! 🫶

Amazon purchase and delivery was easy. Instruction on use of the product was provided, but not necessary as the design is not only innovative, but intuitive. The Fill line is a bit hard to see, so its easy to overfill. You fill what looks like a whit rubber can coozie, the "ice tray" with water to the fill line, then insert what looks like a plastic cup holder into the coozie which pushes the water up the inside of the ice tray. Watch out for overflow, it can make a mess...best to insert the cup holder into the ice tray over the sink. Convenient placement in a freezer, especially if you don't have a lot of surface space, which is required for traditional ice trays. Freezing takes a few hours. When removing ice, you need to massage the ice tray, then try twisting out the cup holder like insert. Once the insert is out, it takes a bit of massaging the ice tray to get all the small cubes out. I find that working from the top down is the best technique. About half way down, pour out cubes, then work the other half of the ice tray. My daughter loves the tiny cubes "they're so cute". The cubes help cool a drink fast, but they do dissolve fast, so anything you are drinking will dilute, which is perfect for strong cocktails or water based drinks. Cubes are also perfect for packing objects in coolers...good surface area coverage.

The tiny ice cubes are so adorable!! Very easy to use and takes minimal space in the freezer. If you have a lot of ice users in your home it might not be “enough” but for one or two people or for people who rarely use ice I highly recommend.

This works as a cylindrical silicon mold. You fill it with water and then push the center piece down into it. This forces the water up into each little ice cube cubby in the mold. Throw in the freezer for a few hours, bingo bingo, you've got mini ice. The issue is that the middle piece doesn't lock down, really. So you're left with a situation where oftentimes the water will pool at the bottom after you've set it in the freezer, and you won't know until you pull it out and end up with a nice big block of ice at the bottom of the mold. If you want to try it, it's not awful. But you need to make sure you set this on a flat shelf in your freezer to freeze, AND push down on the top firmly after you set it in there to make sure all the water pushes up into the cube molds completely. If you've got room for just a normal ice cube tray, you're probably better off using that.

Easy enough to use and makes small cubes that are nice to chew on instead of having to buy a whole machine. The only issue is after a few months use the gray plastic on one of the cups ended up cracking, so don’t smack it too hard trying to get the ice out

When I first bought these two ice makers — the type where you fill the sides with water and put the lid on top — I was a little sceptical about how well they’d perform. But after using them for about two weeks, I can honestly say I love them. They do exactly what they’re meant to do. You do need to give them a bit of a tap or twist to release the ice, and removing the plastic centre helps, but once the ice comes out it’s crunchy, solid, and in neat little square pieces. The ice lasts all day when used in an insulated cup. I use one tray at a time and keep the other as a backup, though I rarely even need it. My iced coffee stays cold and refreshing for hours.

best ice mould i’ve ever used, perfect little cubes, great for iced coffee

El diseño del producto es excelente, uno de los mejores que yo he visto en hielo, para quienes necesitan cubos pequeños. Había comprado ya un par que me tiene muy contento y en una comida llamaron la atención de mi pareja, por lo que quise regalarle unos. El problema fue que cuando llegaron, venían con un defecto de fabricación o de manejo. Los habría vuelto a comprar sin problema si no hubiera sido porque entre que los compré y que llegaron con el defecto, habían perdido el descuento del Hot Sale y costaban casi 50% más.

Love this ice cube maker. Very simple to use and fits in the freezer door. Does not require a lot of water to make a bunch of small ice cubes and last a pretty long time if the drink was already cold in the fridge and using a double walled cup. Had no issues removing the ice as long as you follow the instructions and as others have mentioned, I did not have an ice puck at the bottom of the container when extracting the ice. Those people most likely over filled the container even though there’s a fill line on the container or did not fully seat the plastic insert because if they did, water that doesn’t fit would’ve came out of the two over flow holes. Also I had no issues with water spilling as I have to angle the container 45 degrees to fit the freezer door.

This is an amazing product and works as advertised. I am buying another set to replace my small ice-cube (1cm) trays. This makes small ice cubes, which are perfect if you are an ice-eater (like me), and enough for 1 drink if you like a lot of ice in it (like me). For regular folks, one of these makes enough ice for 2 drinks. You can de-ice it right into itself or a glass so there isn’t need for another container, and refill is quick and easy so you can do it right away. These do fit into my freezer door so they are easy to grab and don’t take up room inside. Tips: 1. When re-filling it, put it on a flat surface and press the top down until all the extra water is removed from the two holes on the top. (Watch out for the fountain!) This will also create suction keeping the water inside in place. 2. When de-icing, fill the center with hot water to detach it from the ice. This makes it easy to slide it out. 3. You do need to run it under hot water or let it sit to de-ice easily. 4. You do need to make sure the bottom is flat when freezing and the lid is secure in place. Otherwise it will sag and make flat ice at the bottom.