Arti-Life 10 FT Double Barn Door Hardware Kit Heavy Duty Sliding Door Track Kit with Hook and 2 Handles,Smoothly and Quietly Hardware for Interior and Exterior Fit 30" Wide Door Panel (J Shape Hanger)

Muy útil fácil de armar y muy practico

Arrived on time, works great

Works great for our new outhouse door.

The Good:The kit is very complete. This is my third barn door installation, and things like the door handles, guide rollers (for floor), and an eye-hook latch, that have always been extras, are included here.The hardware is well made and well finished. There was only one small abrasive blemish on part of the track that could have been from my taking it out of the package.The Less Good:The instructions are written on a small piece of paper that can be hard to read. My instructions came pre-torn somehow, but still usable. They also don't go into much detail about how to install the included accessories, but they cover the basics.The bolts for the door are slightly too long. I have a standard, Home Depot door slab that is 1 3/8" thick, and I either have to have them slightly loose, or deform the acorn nuts that they screw into to make them tight. This can be solved by adding some extra washers.The instructions show a diagram indicating that the first door hanger hole should be 1.5" from the top of the door. I followed this and ended up with a door that hangs too low (the little disks for keeping the door on the track are useless, and I had to cut 1/2" from the bottom of the door to install the guide roller bracket under it). I verified with someone else that I wasn't misreading it. This is the reason for my 4-star rating.It is slightly more difficult than usual to mark the locations of the holes to mount the track. You have to mark through the stand-offs, which are about 1 5/8" deep and hold the track together, making it hard to see your horizontal line and determine the center of the circle you're marking through, and then mark it while the track flexes. You might be able to mark them without the track if you can determine their exact distance apart - somewhere around 12.25" on mine; or, it might be easier to line them up horizontally and us a self-centering punch, but I didn't have that.Conclusion:Yes, I would buy this kit again, but I would do my own calculation for where to drill for the door hangers. The first hole should be at least 2" from the top.

It was what I needed for my daughter’s room.

We had no issues with the instructions for installation, all the hardware was included and thrilled with how it looks.

Instale este sistema de puertas y me encanto

Excelente