6-Mode High Pressure Handheld Shower Head Set, Consumer Reports Recommended HOPOPRO High Flow Hand Held Showerhead with 59 Inch Hose Bracket Teflon Tape Rubber Washers

My daughter in Scottsdale had installed the same shower nozzle at her place down in Scottsdale. When I heard what she paid for it I thought well this can't be this looks like a very expensive device, she said no Amazon and it was like 25 bucks. When I visited her recently I tried her guest bathroom shower head and it was wonderful. So I ordered one, I expected it to leak I expected it to just be a piece of junk It wasn't and it didn't leak I had to use some Teflon tape that was included but that's extremely simple installation took about 10 minutes. This is a great product I highly recommend it I don't know how many years it'll last. The simple little high pressure spray thing that they have with it is simple to use and now I can get the shower walls easily cleaned!

Hands down best purchase we ever made. I live in a 100 year old house with low low water pressure. This thing somehow gives us the best water pressure we’ve ever had in the shower. I have noticed a difference in the dryness of my hair, scalp and skin. I really like it. It was easy to install in a minute. Took the old head off and screwed the new one on.

Works as advertised. Great packaging and well-engineered. Very easy to install without tools. The number of nozzles for the full soak is limited but the product works well one week out.

All the other reviewers are spot on: This shower head has an insane amount of water pressure. (I will also say, that it has the most flexible hose I've ever encountered as well, and it's metal clad to boot!) I've actually purchased this unit twice. Both times, I've been exceedingly happy with my purchase. The first unit, I bought a few years back. It came with a multitude of differently rated regulators that adjust how much water is allowed to flow (adjusts the water pressure). I like a really good strong shower flow, so, like everyone else I removed all the regulators. The water came through so powerfully that it was quite painful. And I couldn't reliably hold the shower head in my hand. Its force was so powerful that it would rip itself out of my grip like a firehose and fly all over the shower. (Admittedly, we have pretty high water pressure where I live.) So, I ended up putting one of the regulators back into the shower head and it was perfect after that. The shower head lasted several years before the hose between the wall and the handheld shower head sprang a leak. I don't fault the shower head for this. Like I mentioned earlier, we have very high water pressure. So, all our water fixtures have a tendency to fail sooner than average. And considering the low price of this product, it's not an issue to replace it every handful of years. I did notice that the latest unit only came with one style of regulator. I didn't care for its level of regulation. So, I ended up pulling the regulator out of the old shower head and popping it into this one. But that is a special case for me, because of the afore-mentioned high pressure in our pipes. The new unit is running beautifully, and I couldn't be happier with it. If our high pressure gets to this unit in a few years, I will still happily purchase another of these units. They are very economically priced, and there is simply no other product I've found on the market that can deliver this much force and pressure at such a great price. There are some that will fault this product for being plastic instead of metal (although, it is beautifully chromed to look like metal) . I consider the plastic a plus, not a minus. If you drop your handheld shower head, or it flies out of your hand because of the force of the water coming out of it, a metal shower head flying through the air has a better chance of damaging your shower walls/floor/door, whether tile, glass, fiberglass, etc. Whereas, a plastic shower head has almost no chance of causing expensive damage to your surroundings. If an impact happens, and something has to give, I'd rather the easily (and more cheapily) replaceable shower head be the sacrificial part, rather than my shower wall/floor tiles, or the glass door to our shower. So, I feel making the unit out of plastic is a value-add. All in all, this is one of the very few online purchases that I can say I am truly glad I've made and would happily purchase again and again without question. I'd wager to say they've reach the pinnacle of what this product can be, attaining as close to perfection as is possible. And so, I hope they don't make any changes to it and continue to sell it in its current form for a long time to come. I whole-heartedly recommend this product.

Very Pleased. Works well. Easy to install. Tried a Water Pik first. Horrible. Much better hose line. No headaches.

Loved it! I had read the reviews for this product before I purchased, so I took their advice and I removed the pressure restrictor before installing the shower head. And now it is perfect. The water pressure is great yet not too hard to hurt, the shower head I was replacing was too hard that it stung the skin. It was easy and quick to install and no leaks.

Our old showerhead was a super expensive brand name, which was in a color we could no longer find. It did not work well, so we needed a replacement. This had a ton of good reviews, so we tried it. Pros: * It looks good. * It has all the spray options we want, & easy to get the one you want. * Hose is a bit short, but we don't want a mile of Hose. This will rinse the whole shower, no problem. * Everything needed to install is provided. We did not need the tape, or shower cap. Cons: * This is entirely plastic, so who knows how long it will last. * It came with a plastic holder, but we kept the metal one that was already there from our old one. * The water flow was a trickle when first installed, so we had to take it off, pull out the tiny O-Ring, & try again. That got sufficient pressure for the shower setting we use, but the massage / power settings were still insufficient. Overall, for the price, it's a reasonable replacement showerhead & hose. We're happy to just have one that works for a change. I recommend you keep the holder you had, if it's metal. This plastic one is unlikely to hold up over time. NOTE: If you like the super high pressure wash settings, you should assume you're gonna have to remove not only the tiny black O-ring (Located on the screw end of the shower head handle), but you may have to remove the piece that holds that O-Ring, as well. I saw a guy on You Tube, showing how he drove a wood screw into it, then pulled it out. It worked well for him, but I was reluctant to do it, & we're happy enough with the shower selection/pressure we now have, & never change it, so no need for us. Just an FYI, all showerhead manufacturers are now required to install water flow reducers in the US (because apparently we're all babies, & need Nanny to set the water pressure for us. Thank you Nanny.) So it's Not just this brand that will require you to fiddle with it, to get the water pressure you want. They all will, no matter what they say about Water flow in the ad. Personally, I'd just turn down the flow of water at the faucet, if I wanted less, but thanks to nanny, many shower faucets only allow you to adjust the temp, & the flow rate is not adjustable, anymore, either. (Geez Nanny, you're starting to get on my nerves now! I would prefer LESS water flow, Not more, but that's not allowed - in the name of Saving Water! Huh?).

Love this! Best Shower head for the price and quality I’ve had in a no name brand from Amazon. Easy to assemble and the finish matched perfectly with my rentals bathroom hardware.