Upgraded Tire Inflator Hose Adapter w/360° Rotating End, 21'' Tire Inflation Hose w/Self-Locking Air Chuck for Quick Connect & Release, Presta Valve & Ball Needle for Tire Pump Portable Air Compressor

My portable air compressor has a short hose that is difficult to use for inflating my motorcycle and bicycle tires. This device has solved that problem for me with the length/flexibility of its hose and self-lock clamp that attaches to the valve stems. The price is very reasonable too.

I bought this product to add a quick connect 90 degree adapter to my portable tire inflator.Product is of good construction quality, hose is flexible and quick tire valve connector fits well and is easy to use

This hose solved my problem. I received a portable tire inflator as a gift. The hose that came with it is only about 9 or 10" long. It has to be screwed onto the valve stem. When filling a tire, I had to bend over and hold the inflator while it slowly filled the tire. When it shut off, I unscrewed the hose as quickly as I could only to find that 3 pounds of air pressure escaped. I had to overfill the tire to ensure I would have enough air after unscrewing the hose. This was unacceptable. This 21" long hose with quick release locking air chuck solved my problem. I can now connect and lock the air chuck to the tire valve, turn the inflator on, and set it on the ground (the rotating end allows your inflator to rest in any position). I can stand up or walk away while inflating. After filling, just release the lock and your tire remains inflated to the desired pressure you set (at worst you might lose a half pound of pressure). I'm very satisfied with this hose and highly recommend it. One more thing, this hose seems to inflate my car tire much quicker than the hose that came with my inflator.

Arrived on time and was utilized immediately. Exactly as described.

I use my portable air pump on my car at least two to three times a month. I am tired of unscrewing the hose while also unscrewing the wheel caps for the air. However, I did a bit of researching on Amazon and came up with this great accessory that attaches to the hose my air pump came with. All I have to do is just clip it on the wheel valve and that reduces my work by 50%. Great product, I do recommend.

It was the perfect fit.A little shorter than i imaganed. does the job fine.

My Fantik inflator came with an 18" hose that screws onto the tire valve, but the hose comes out straight of the tire and sometimes it's difficult screwing it on in between spokes or a big hub cap. This new hose has the 90 degree clamp on fitting and is 21" long and helps to lay to inflator on the ground instead of bending over holding the inflator for long periods. This hose also includes two adapters for inflating swim tubes etc., a Shrader to Presto adapter, and a sports ball inflating needle. And the end that screws into the inflator swivels so you can always see the screen and see what pressure you are applying. EXCELLENT !

My car's tire nipple is somewhat obstructed by the wheel cover design but nothing out of the ordinary. But I cannot push the hose tire connector deep enough to make it permanently connected and my tire inflator doesn't pump because of that