Blackmagic DesignMini Converter UpDownCross HD

I had a day to prepare for a presentation live stream with a camera I knew wouldn't work with my BMD switcher in 1080P30. This came overnight and I configured it on the job. It worked immediately after the first attempt at setting the dip switches. It's a little confusing when you look at it at first, but once you figure it out, it's plain as day simple. Set the dipswitches upside down, from right to left while looking at the chart. Now I had also ordered a decimator md-hx but it did not arrive in time. I am happy it turned out this way. This little BMD is half the cost and does the trick. Sure, it doesn't have an LCD display, it doesn't have an app to configure it, and some advanced scaling options that the decimater has, but it works for most applications and the setup is indeed fast. It auto detects your input from any format down to 640x480 and up to 1080p60 and outputs to any format from 720 and up to 1080p60. Very useful when incompatible video devices get connected to a switcher.

i work at various bars with video matrix systems and most have some OLD TVs that don't like my HDMI laptop signal (it only outputs 1080p 60 Hz). These old TVs will not detect the signal or go crazy when i connect. Eventually I figured out that they work perfectly with HDMI 1080i (interlaced) signal. So I bought this to convert my laptop HDMI 1080p output to 1080i and they all work perfectly. No dropped signal, no latency...perfect solution.

I have 1080p60 coming out of my Blackmagic ATEM Television Studio HD going into my streaming deck but I also wanted to send this signal to another room in the building with an older projector that only does 1080p30i. This is EXACTLY what I needed for that. I could loop out the signal unaffected to my streaming deck and then send it down the hall to the other room in the format that projector needed.The other room is 200 feet away and I have had no issues at all. I did have to go online to get the manual to figure out the dip switches, and it is true that some are not used/needed, but once we figured that out, boom... it worked flawlessly the first time and I hope it will continue for years to come. If it does not, I will update my review as I always do. So if you're reading this and there is no further update, it's still going!

Converts signal as intended

Buen producto. Lo único malo, como todo lo de Blackmagic es que se calienta demasiado.

We needed to convert the video output of a laptop computer to match the output from two video cameras before sending it to the Blackmagic ATEM Television Studio HD. The process of configuring the converter using a set of dip switches is straightforward and simple. It worked on the first try! A short, simple set of instructions are provided with the device. The settings required to output a variety of formats are also printed right on the device itself, avoiding the problem of the lost manual. The only slight drawback we could find was that the print is very tiny! This is a necessity to fit all the information in the small space available, and the drawback is easily overcome by good eyesight or a magnifying glass.We were under strict time constraints with this project, and were very pleased with Safe Harbor Computers prompt response. The item shipped almost immediately, and arrived within a few days.

We needed a converter; we bought this one because it's reliable, even if the dip switches suck. Amazon wouldn't stop sending me emails to review this product.

Well made product like other of BM's items. We like them, and use them in our AV needs/projects. Because of the connections available, this adapter cut out a few extra adapters that we would have had to purchase.Would buy again. Recommend