ARCTIC Liquid Freezer III Pro 360 - AIO CPU Cooler,3 x 120 mm Water Cooling

I purchased the ARCTIC Liquid Freezer III Pro 360 in July for under $70 and paired it with an AMD Ryzen 7 9800X3D on an MSI PRO X870E-P WiFi motherboard. After roughly two months of use, I’ve been very happy with its performance. Installation was straightforward, and everything needed for the AM5 platform was included. The mounting hardware felt secure, and once installed, the cooler has required no adjustments or maintenance. Cooling performance has exceeded my expectations. My Ryzen 7 9800X3D typically idles between 37°C and 46°C, and during sustained 100% CPU stress tests, temperatures remain between 64°C and 70°C. During normal gaming, temperatures stay comfortably below those values, leaving plenty of thermal headroom while maintaining consistent performance. Another thing I appreciate is the overall noise level. The fans and pump remain quiet during everyday use and only become noticeable under heavier workloads, without sounding excessive or distracting. Considering the performance, build quality, and included hardware, it’s difficult to find a better value at this price point. For under $70, this cooler delivers exactly what I was looking for. It keeps my 9800X3D cool under load, runs quietly, and has been completely reliable since installation. I would absolutely purchase it again.

Works great and keep my cpu at a good temp, even when running demanding games like BF6, Cyberpunk and other MMO titles that I play, honestly I have all my fans arctic and the aio as well. Easy use and install, it fit great on my case and the compatible with my build. Can't go wrong with Arctic,this is my number 1 for pc parts over any other brand. Product is perfect, quality is great, installing it's products are easy for me, love the colors that I've bought and the prices for the parts are budget friendly for me. I'd recommend Arctic products to anyone. Arctic will be my personal go-to pc parts for me and I'm a PC builder. Great work Arctic!

The ARCTIC Liquid Freezer III Pro 360 lands squarely in “gamer-approved beast mode” territory — it’s one of the strongest-performing AIOs on the market right now, especially for high‑wattage CPUs. Across multiple professional reviews, it consistently punches above its price class with standout thermals, strong fans, and clever engineering. 🔥 What Makes It a Gamer’s Cooler • Top‑tier cooling performance — Reviewers repeatedly highlight its exceptional thermal performance, thanks to the thick radiator, high‑pressure P12 Pro fans, and integrated VRM fan. It excels in both noise‑normalized and max‑speed tests, keeping even the hottest CPUs in check. • Built for modern high‑end CPUs — It’s praised as one of the best coolers for chips like the Ryzen 9950X3D and high‑draw Intel processors, delivering chart‑topping results at a surprisingly reasonable price. • Gamer‑friendly design — Hidden cables, long tubing, and a clean aesthetic make it easy to build with and perfect for RGB‑leaning setups. PC Gamer calls it “the new AIO to buy.” • Quiet until you push it — At normal loads, it stays impressively quiet. At max fan speed, it gets loud — but that’s expected for a performance‑first cooler. 🎮 Real‑World Gaming Experience • High FPS stability — Lower CPU temps mean fewer thermal spikes, smoother boost clocks, and more consistent frame pacing in CPU‑heavy titles. • Great for overclockers — The integrated VRM fan helps keep motherboard temps under control during long gaming or stress sessions. • No‑nonsense installation — Native offset mounting for Intel and AMD helps center the cold plate over the CPU hotspot for better heat transfer. 🧊 Quick Gamer Verdict If you’re building a high‑end rig or pushing a power‑hungry CPU, th

Just installed this on my first and new pc build and haven’t had a whole lot of time really using it. So my 1st impression is mostly positive. Pros- Does a good job at keeping the CPU cool. I’m using the AMD Ryzen 7 9800X3D and so far keeps it cool. At idle the temperature hovers between 34 and 40C. Great quality for the price. I like the sleek black fans and cleanliness it gives my PC. It feels rugged and well built and looks like it’ll be a very durable addition to my PC. Cons- it’s a bit loud even when at idle so be aware if you need your PC to be quieter. The instructions could have been written a little more strait forward. I had to do some YouTubing to figure out on how to instal it. This was the most frustrating part of my PC build. I had to really finagle to get the radiator and fans mounted to the tower (doubtless check to make sure it fits your setup). Even though the hoses are stiff and seam to be well built, it does make it harder to mount to the cpu. Overall I’m happy at the moment and I plan to make an update once I really start gaming on it.

I had thrown this baby into an ASUS prime 201 and it fit beautifully! It’s slim, sleek design and magnetic vrm cooler makes it even better. The fans do get a little noisy at 3000rpm however you don’t really need them that high. Installation was fairly easy, you just have to keep the left and right brackets a little loose. The all in one cable also came in really handy. For $80, performs way better than my nzxt lcd. You cannot complain about the price!

Great CPU cooler. Dropped my computer’s idle temp to 32* with a maximum temp of 86* during stress test. (I have an i7-14900 that would thermal throttle at 100* during stress test with air cooling). Fans and pump on max aren’t that loud. Majority of the time it is silent. Amazing product for the price, plus no RGB lights, which is rare with pc parts and fans these days.

It works great and keeps my PC at great temp. that has a Ryzen 9 9950X3d. My issue with this AIO is that it was extremely hard to put on when one screw went in slightly you would have to almost force the other side down, but I did get it screwed in and it fits nice. Also the only manual that you got is a video that is video that is a side shot so it's hard to follow what to do. Instead of the video being a side shot it should be a up down view to see how to properly do it.

Works well once installed. The install was a bit tricky. It's really hard to get the spring-loaded, water block screws into the AMD CPU bracket. Alignment was a little off and felt like I was going to break my CPU/MB. I finally figured out that you can loosen the top screws of the right and left brackets to give them a bit more wiggle room to get the waterblock screws started, then tighten everything down a little at a time. I planned on putting it in the front of my case as an intake. It's set up for exhaust and I didn't notice until after install. Okay so I read the online directions and it says to flip the fans. Looks like intake/pull is the only option in the directions. Get it installed a second time. Now the fans are screaming loud. Hmmm did I break something? Return it to factory set up and the fan wining goes away. So looks like the fans don't like being in pull configuration so close to the radiator. Finally decide I need to just figure it out on my own since both options were unacceptable. Messed with it for a total of about 5hr installing it and unistalling until I was happy. I flipped the fans to the other side of the radiator and ran the fan mount screws through the case, fans, and into the rad. This was tricky to install but worked with stock screws. Now I am happy and my temps have dropped about 12C on a lightly OC'd 9800x3d in cinebench coming from an old Noctua NH-D15! A tiny bit louder but that can probably be tuned out with fan curves. Case is an old fractal design define S. Was able to mount the radiator tubes down with a asus prime 5080 in the way.

Coloquei esse Walter cooler no processador Ryzen 7 9800X3D e não passa de 40 graus

Se avete seguito l'evoluzione dei dissipatori AIO, sapete che Arctic è una garanzia, ma con questa serie III hanno superato se stessi. L'ho scelto per raffreddare il mio nuovo Intel Core Ultra 7 265K e i risultati sono semplicemente sbalorditivi per questa fascia di prezzo. ​ Una delle novità più interessanti è l'inclusione del contact frame specifico per il socket LGA 1851/1700. Invece del solito sistema a staffe, si sostituisce direttamente il meccanismo di ritenzione della scheda madre. L'installazione richiede un minimo di manualità in più, ma garantisce una pressione perfetta sul processore, eliminando i problemi di curvatura del chip. Sulla mia B860-Plus si monta perfettamente, anche se lo spazio intorno ai VRM è millimetrico. ​ Per quel che riguarda prestazioni termiche e silenziosità l'Arctic brilla. Mantiene l'Ultra 7 a temperature incredibili: in idle siamo sui 30°C e sotto carico pesante in rendering non ho mai visto la CPU superare i 75-78°C. Il radiatore da 360mm ha una massa radiante generosa e la ventolina dedicata sulla pompa non è solo marketing: aiuta davvero a tenere fresche le fasi di alimentazione della scheda madre, cosa fondamentale se non usate una top di gamma. ​ Il design è molto "industriale" e massiccio, deve piacere. Un enorme pro è la gestione dei cavi: le ventole sono già pre-cablate lungo i tubi e arrivano alla pompa, quindi avrete solo uno o due cavi da collegare alla scheda madre. Un paradiso per il cable management. ​ Cosa sapere prima di comprare: ​- Spessore: Il radiatore è più spesso della media (38mm + ventole). Assicuratevi che il vostro case abbia spazio a sufficienza sul top, altrimenti rischiate che tocchi le RAM o i dissipatori della mobo (io ho dovuto tagliare un angolo dell'AIO per questo motivo) ​- Tubi: Sono belli rigidi e di qualità, ma richiedono un po' di spazio per essere piegati correttamente. ​ Difficile trovare di meglio, anche spendendo il doppio. È potente, silenzioso e risolve alla radice i problemi di contatto dei nuovi processori Intel. Se avete spazio nel case, è la scelta definitiva per chi cerca prestazioni da workstation senza il rumore di una turbina.

تعامل ممتاز وصل بشكل سليم وكما توقعته شكرا للبائع وشكرا امازون

Viene con todo lo necesario para montarla, no necesitas nada adicional. Me gusta que hayan elegido una buena pasta termica para acompañarla en el paquete, ya que otras marcas suelen recortar en este sentido. Ruido hace, por supuesto que lo hace, son tres ventiladores, pero el precio es contenido. Hay ventiladores que con las mismas vueltas hacen menos ruido? Claro que si, pero te salen a 15/20 euros cada uno, aqui estás pagando 85 euros por todo. En cuanto a la refrigeracion en si, muy contento, mantiene mi 3800X a raya. Antes tenia un Cooler Master por aire, y se nota la diferencia.

رائع وسهل التركيب لقد انخفضت حرارت معالجي i9 13900k