Spigen Ultra Hybrid Case Compatible with Nothing Phone 3a - Space Crystal

As the title says the case is great, it fits nice and snug and the buttons are still nice and tactile so you still get that nice click. I've had no yellowing so far but I've only had it for a little over a month so time will tell if it holds up. The back it solid with the sides still being solid but rubberised so you can flex it just enough to get the phone in and out the case. My one and only complaint is that where the cutouts for the camera and flash is leaves a big enough gap where crumbs and any other thing like dust or dirt can find it's way in behind the case so the only way to clean it is to remove your phone and clean it that way. It's almost a daily occurrence to find dust or some crumbs behind the case up at the flash area and it can get annoying. Not the biggest issue as a phone case should always be about protecting the phone from damage but I feel like making the plastic a little thicker in that one section so it made flush contact with the phone wouldn't be difficult for them for quality of life purposes.

Why did you choose this product over others?: Finally a case where I don't press the essential key by accident. I was already going to sell the 3a because I hated the essential key with passion. Was pressing it constantly with other cases. Great case, cutouts in the right places, fits perfectly, looks great and is not slippery, holds well in hand. Nice a slim feel. Highly recommended for 3a.

Well built and designed compared to cheaper transparent cases (because this one costs more of course). The back is made from a hard plastic, after a month there are a lot of marks and scratches likely from keys and other metal objects. Despite a phone case making this massive phone wider, it made it gripable, I had some trouble holding it without a case, felt like it was going to slip right out of my hand. There are a few additions to the case design: Their logo on the bottom left side Small AIR CUSHION TECHNOLOGY top of phone Strange holes bottom right side of phone The corners are raised and have their air cushions And like all transparent cases, it will probably go yellow, but NOTHING so far and I hope it stays that way for a long time. Due to the phone's design, getting anything other than a clear case is wasteful IMO. (I would also recommend getting a screen protector this case doesn't include one and a bundle. It's a nice phone, you'll treat it well won't you?)

It's a nice case. Gives some protection from falls. Good grip and does the job for me.

Having bought both the official NOTHING black and clear cases I can confirm that they are both absolutely hopeless. 1) They are absolute fingerprint magnets leaving them looking disgustingly vile at all times. 2) The TPU starts sticking to the glass back in places within days of using them which in turn leaves weird 'oil like' ghosting all over the back. The only way to solve this is to lift the case away from the back panel to let air in before reapplying. I presume that this is a problem with all TPU cases. I've just bought this Spigen case which has solved all these issues perfectly! The TPU smoke tinted frame is extremely sturdy but pliable enough to allow easy removal and application of the case. The clear Polycarbonate back is firm and does not stick to the back of the phone. It is also far less of a fingerprint magnet than TPU backs are. This case design is everything NOTHING should have employed on their cases in the first place. I can only highly recommend this case!

Fits perfectly - tight so you have to push hard. Clear back that shows the glyphs perfectly. Slightly padded corners. Buttons work perfectly. I really like this case, even though it's on the pricey side.

Good product. Worth for the money spent. Easy to install. Highly recommend.

I've had Spigen cases before and they've provided the best protection, and saved my phone's from heavy damage. This case is no different, great Spigen protection for the unique nothing phone. You still get that glorious LED display without the worry of the clear phone backing becoming scratched or cracked. However, I've noticed two flaws with this case to keep in mind. Firstly, although I keep my phone on its front to make the most of the LEDs, the case back is already quite scratched after 2-3 weeks (not surprising). But, it has also developed indents from small debris (e.g. grit) leaving a pitted look in places. This is only really seen under direct strong light, most people will never notice. Secondly, the back is a fingerprint magnet. It's quickly made greasy, smudgy, etc. Again, unless under direct light it won't be overly obvious and is easily removed with the wipe of a cloth. Lastly, the biggest, potentially avoidable flaw. The back of the case is not flush with the phone and leaves a small space between the two. This allows dust, hair, grit, etc to get under the case and if you've gone with the white nothing phone it gets obvious quickly. Furthermore, the grit will easily scratch the back of the actual phone if you go to remove the case to clean beneath. So I recommend you get a protective film for the back of the phone and then add the case to avoid scratches. Slightly overkill but the idea is to preserve the phones most prominent feature. Overall, this is still likely one of the best options as Spigen do great cases. Just let down some by the gap between phone and case.

Better than original nothing case in every aspect. Can recommend.

Slightly grippy so it will stay in my hands and not slip out. I like it

Spigenのケースの作り込みは安定してますね。装着も完璧に近いと思います。 今回のケースは透明な素材ですが適度な柔らかさがあり、滑らず本当に持ちやすいです。 またボタンの押し心地も気持ちいいです。pixel7 proの時そう思いましたが、ここはSpigenの良い点の1つだと思います。

**Looks good** the Spigen case for the Nothing Phone 3a has a clean, minimalist design that matches the phone s own aesthetic without trying to be flashy. **Fits well** it snaps on snugly and the cutouts line up perfectly with the camera module, side buttons, and charging port. I didn t have to wiggle it into place, and it stays put even after a few days in my pocket. **Inspires confidence** the TPU bumper feels solid yet flexible, and the polycarbonate back adds a nice grip. I ve dropped the phone a couple of times on carpet and concrete; the case absorbs the impact and the phone comes out unscathed. **Recommended** for anyone who wants protection without bulk, this Spigen offering does the job. It s affordable, looks right, and does what a case should. As always, thanks, Spigen.

الشركه معروفه و غنيه عن التعريف بجودتها و قوة كفراتها ، صراحه طاح مني الجوال كم مره لكن بفضل الكفر و حمايته القويه الحمدلله ما جاه شيء ، الفكر بطل و يحمي الجهاز من كل جهه