Williams Gun Sight FP-AG Receiver Peep Sight with Target Knobs, Black (14170)

Just what my Henry needed. Quality sight with click adjustable vertical and horizontal settings. Best rimfire peep sight for the money, as far as I’m concerned.

I studied long and hard online for this. I sent out several emails to people that rave about thier peep sights but couldn't get a straight answer. I looked at the reviews and descriptions on AOA dot com but was still unsure.I took a chance on this one simply because it is the AG model (duh). Works perfect on my HW30. The airgun has pretty much no droop. The airgun has the replacement inserts in the front sight (I think some older HWs have a fixed front globe sight that is 1/16" shorter than the newer ones). My Williams AG sight is set in the middle of the elevation range.My OEM semi-buckhorn rear sight is very versatile from 10 yards to 100 yards, believe it or not (search for Elmer Keith long range sights for how-to). However, I love the peep sights for 10 yards to 30 yards. 50 yards is a little tricky. Farther than 50 yards is difficult. Of course I'm not hunting, just plinking.I may try the Williams on my HW95 one day. I'd really like to try it out plus I'd like to know if the AG is the right one.The Williams web sight is poor for providing instructions on the AG model. I gleaned little there. Good luck, I hope you are mechanically inclined. That's what it takes. The allen screws tighten the sight to the dovetail on your gun but you have to remove the top half of the sight by raising the elevation (after you loosen the tiny tiny flatheads that lock the Target Knobs). To Mount; First you need to slightly tighten the flathead screw that kinda sets and locks the dovetail clamp. Then tighten the allen screws but don't destroy the wrench. Finally finish tightening the flathead screw.Don't worry too much about mounting the peep sight at extreme rear of rifle. I put mine a convenient distance from the safety for ergonomics. It reduced the potential for maximum sight radius but the sight picture is great. The shorter radius actually eliminated visible light from out / around front globe.

It's a good sight, but despite its low profile, it still sits too high to be usable on the Hatsan Striker 1000x (Which is what I got it for). Unfortunate, but I'll keep this sight in case I ever get something else to put it onI saw some reviews say that you can't adjust the windage and elevation without tools. I'm not sure what their problem was, because I was able to adjust my sights just fine with the thumb screws. You do need a tool to secure the sight to the rail though, but a really small allen key is included so you can do that. It can be easy to miss, so make sure you really look for it

maybe I'm being petty, but it would have been nice to have included the very small allen wrench to tighten the sight down, very nice sight and well made

My lever action rifles have williams sights and I wanted the same for my 10/22 so that I can shoot silhouette competitions with all of them. My 10/22 is a stainless model from 2001 and it has a low profile rail for tip off scopes. This sight fit right on and does not touch the synthetic ruger stock. My front sight is 1" tall to the center with the ruger stainless pencil barrel. I used two 1/4" tall dovetail risers and a 1/2" Shaver #17 globe sight. Other people said there is another williams sight that can be used on the 10/22 but the stock has to be notched. This one works fine out to 100 yards and my 25 yard zero is right in the middle of the height adjustment.

This has fit right onto a number of my springers that have the traditional 11mm dovetails mount. It’s a very high quality sight but requires a screwdriver to loosen the lock screw before you can adjust elevation. I hate that aspect and think it’s ridiculous something this expensive can’t be adjusted just with the knobs. That’s its major downside and with an airgun you tend to adjust the sights a lot in the field.

This really nice sight went on my Weihrauch HW95 air rifle. I stopped using scopes years ago. I like the challenge of open sights. This peep sight added a level of accuracy over the rifle’s stock iron sights. I can Just see the bullseye more clearly. It fit my air rifle perfectly. Directions that came in the package were not clear or accurate, but easy to figure out. It looks good on the rifle and helps me hit a quarter at 35 yards. I’m not that good, but this peep sight on my HW95 is. Windage was spot on from factory, had to ease elevation all the way down for that perfect 35 yard shot.

I put this Williams Rear Peep sight on my Diana RWS 460, the sight radius for the stock sights is 16.5" inches vs This New Peep sight mounted as far back on the 11mm dove tail rails as possible providing a sight radius of 29.50" inches, this is a HUGH difference. Next the front sight on the D460 is Thick, I painted the front sight with gunsight paint and taped it to provide a much Thinner painted line on the front sight. this made Great change to the accuracy of this rifle over the stock sights. The D460 is 8.3 pounds without a scope, add 2 more pounds for a scope. I wanted my Diana 460 to be as Light weight and accurate as possible. this peep is just the ticket for good accuracy for long range shooting. Practice Practice Practice with this sight setup yields great results. Sugar, starch foods and High Blood Insulin levels provide Poor eye sight to the shooter, no matter what the age, an Old guy like me that has Great eye sight due to an excellent diet is very important to remain a Great shooter as you age.