Tire Storage Rack 57" x 55.1" x 20" w/Anti-dust Cover

Good value. High quality. Easy to put together; taking about an hour. The bottom rack I had to put on the lowest level so my 17 inch steels and snow tires would fit under the top rack. The shelves on the side are perfect for the extra lug nuts. The cover is nothing great, but does what it’s supposed to.

Looking for a way to organize my additional sets of wheels, I picked up the 57x55.1x20 version and set it up last month, and it's working great. Easy to set up on my own, I was able to load 4 - 17x9.5 with 255s, and 7 - 16x7 with 215s with no issues and it worked out perfectly since i use the eighth 16in wheels as a spare in one of my cars. The casters work well and they lock in place and I can unlock and roll this out of the way to get to my Quickjacks when needed.

This storage rack is the exact, comfortable length for my 4 Tesla car tires. Putting it together was easy following the included instructions. It allows me to store the tires at ground level rather than on the wall up high as I did before. Taking them down from the eye-level rack was too risky, and I didn't want my adult son to get hurt either. This rack is sturdy and having it on wheels is a BIG PLUS!

I'll give it 5-stars because it's a great tire/wheel rack. However, it states it will hold up to (8) 255/45R-19 wheels. It does not. It is just wide enough to hold (8) un-mounted tires of that size. When the tires are mounted (as my winter and summer are) they become a little wider because of the air inside. Lastly, the bolts used to attach the bars take away almost a half inch of the 42" width, that they claim is available. Squeezing tires/wheels into that 39.6-inch space could damage the tires because of the bolts. Note: I even put the bolts on so the pointed (threaded) end points away from interior. Luckily, they sell a larger size product. 😡 Now, I need to return one and start all over... Just because they state the sizes wrong. It is easy to put together tho.

The tire was exactly what I needed. Instructions and hardware included. I was surprised at the quality of the castors and the ease of construction. Everything Fit!!!

Easy to put together, and looks good. But a little on the weak side. Have 2 sets of 315/35-18 track wheels and tires on it, and the top row sags. Would be fine with smaller sets.

Bang for the buck is great. Sturdy construction, goes together quick. Casters are good quality so it moves easily. It's deflnitely painted and not powdercoated. Some paint chipped on ends before it was even pulled out of the box (maybe use primer eh?), but it still looks great. Would buy it again.

UPDATE: Look at the customer photos NOT the Amazon photos. Compare the listed width of the rack at 18 inches to those product photo tires, and see that their product photos are with tires that are 20 inch to 24 inch diameter which would be a non-standard extremely small R10 to R12 size. This means the included cover will be about 18 inches off the ground completely exposing the bottom row of tires. It also means the top row of tires is not really supported and the tires fall over easy. Customer Service is not helpful, difficult, clueless, and are not familiar with their product and do not have one to look at for dimensions. The cover will not cover the bottom row of tires. The steel rack is sturdy for small non-mounted just rubber tires, but I would be nervous with the extra weight of metal for mounted tires, see the other customer review that showed the rack bent when they put mounted tires on it. The powder coating and welds are marginal, not good (one cross member was installed with the holes in the side and the other with the holes down (no quality control). The powder coating was bad enough that I had to paint it. The cover is false advertising on size and water resistance with lots of pin holes, bad zippers, and is 18 inches too short with 8 normal size car 225 width R18 tires. Half of the bottom tires are exposed with the cover on and this is with both sets of bars installed as low as possible and all 8 tires are in the recommended size range, and with no side shelves installed and the cover still doesn't work. The cover is light weight garbage and not water resistant due to all the holes at the seams and in the main fabric. I did not use the wheels so I don't have any comments on those.

When I got it in the box, I had my doubts, was this really big enough to hold 8-10 tires. I was blown away, easy to assemble, easy to mod (I am not using a shelve). A 5 year old could assemble it and use it. If you need a tire rack, do not hesistat to buy this one, it takes up a small footprint, and does the job.

Solid rack, pretty easy to put together too. I like that the side supports are all one piece. Did not install the side shelves as I'm not sure what I'd use them for.

Jaime bien ces support a pneu. J'en ai meme acheter 3 support comme sa.

Easy assembly and options where to put the side shelves. Various holes for different tire diameters. The cover is huge.

Ridiculement petit, ils ont pris les photos avec de petits pneus, pas avec des pneus de VUS ou autres…. La toile ne fait pas jusqu’en bas en mettant des pneus « normaux »