Automatic Iron (Dry Iron) NI-A66-K (BLACK)【Japan Domestic genuine products】【Ships from JAPAN】

Overview: My intended use is as a craft/sewing iron. Accordingly, I value these qualities in this iron and I recommend it--but please read my comments (similar to other considerate reviewers): (1) no steam; (2) smooth soleplate; (3) small and well balanced form; (I don't see that toppling is a concern for me) (4) no auto shut off; (5) range of temperatures (it gets plenty hot) (6) light weight (1.77 lb) For my intended purpose of having a lightweight iron to use frequently in my quilting, this iron is perfect (compact/lightweight). It gets plenty hot though it is only 700W. I tested it on fusibles, and they adhered perfectly as intended. I had considered getting the Rowenta (I have the steam generating and a regular one (that hisses and spits) --but after reading the reviews on their travel iron (collapsing handle), I got this iron. It will feel quite comfortable in most woman-sized hands. The fit and finish on the iron is superb; it is perfectly balanced and engineered to include cord reinforcement at the base. As others have noted, it is Japanese 100V/700W appliance (and all info in package and markings on dial are in Japanese. But the heat goes from low to high as with most irons, so you can easily test the heat. The heat dial is larger than most irons. It cannot be accidentally hit and moved when grasping handle. It seems to have a wide range heating settings that most will enjoy. Regarding the voltage: My husband, the electrician, tells me that I shouldn't worry using it with a 120V outlet. As it does not have an auto shut off (a feature I required for my quilting use), consider plugging the iron into electrical power extension (with on/off) that also powers a light so that you always have a visual cue that your iron may be on. I did not notice any heating of the cord. ** Of note: the sole plate is a non stick finish does not feel quite as smooth a stainless, teflon or aluminum. It works fine for my intended purpose. However, if you are looking for a silky glide, you might be disappointed. It is not a problem for me.

Love this iron!

I have used this iron for piecing quilt patterns for a couple of years. I just purchased this second one to have on hand, should my current iron were ever to stop working. However, it's still going strong. I love the weight, the size, the fantastic heat it puts out. If I need steam, I simply spray my fabric with water or pressing solution, rather than mess with a steam iron that has the likely potential of leaking or spewing a mess onto my fabric. Very, very pleased with this non-stick dry iron.

I’ve had this iron for 2 years. I loved it, until today. The coating is coming off. I use this iron for quilting. I’m not sure what happened. Today when ironing I noticed a silvery grey residue on the fabric, and then looked at the sole plate. While it lasted it has been my favorite iron. It still heats well.

This iron has no steam so no spitting or leaking. It is in Chinese (I think) but it’s easy to figure out the heat settings. It gets really hot, which some other irons dot seem to anymore. When ironing cotton it mist my fabric and use this hot iron and it really helps take the wrinkles out! It’s lightweight but does a great job!

I didn't even know anyone made a dry iron anymore. I used to use a steam iron, but never added water to it because irons don't last as long when you use the steam function. They also stain whatever you are ironing if you use a steam iron, even if you don't have water in it. I learned this the hard way by ruining some fabric I was pressing. I use a beauty shop mist spray bottle filled with distilled water and my dry iron if I need to press out wrinkles. Works great. This iron doesn't have an auto shut off either, which is nice when you are sewing and need to sew and then press often. The auto shuts off can be annoying, even though I know they are a safety feature. The dry iron and the no auto shut off are both great selling features for me and anyone who prefers these features. I like the old fashion look and simplicity of this iron. While the heat settings are in Japanese, it's pretty simple to turn it hotter or cooler as needed. I really like the handle with the indented thumb rest on both sides, so if you are left or right handed, you can place your thumb comfortably in the indents. This is a Japanese design, but made in Malaysia. I love Japanese design tools as they are so well thought out and simple and this iron is a perfect example of great design and function. I'll never buy another steam iron again now that I know I can buy this dry iron. I am sure this one will last me a long time as there are no bells and whistles for things to go wrong.

In my opinion, the listing for this item should prominently highlight that it is a 100v iron made for use on a Japanese power system, as this is not the same system used in the US where the item is being sold. Buyers can then educate themselves and decide what their own level of risk tolerance is before using this iron without an appropriate step down converter. I bought this item after a quick search for a dry iron, as I sew and would prefer to have a dedicated non-steam iron with a completely smooth plate (no holes that corrode over time). I also really liked the lack of auto shut-off and the low pull (700w) for my electric bill. Unfortunately, dry irons are not marketed in the US but are common elsewhere in the world. Quality irons without an 8-minute auto shut-off are also hard to come by these days. So I thought I had lucked out in finding one at last, until I looked at my new iron and realized that it was not rated for use on a US power system. Yes, the plug fits US sockets, but that does not mean the inner workings are the same. And even though 100 seems closer to 110-120 than 240, it is not the same and this iron is NOT rated as being dual voltage capable. I may be conservative in terms of home safety, but after several international moves in my lifetime I have learned not to take chances with electricity. I certainly don’t claim to be an expert on electricity or power converters, but I have educated myself to the extent necessary to keep my home and family relatively safe. Some of you have as well, and I am not trying to tell you what to do - I’m just sharing for those who might appreciate the heads up. This iron WILL work when you plug it into your US socket. The iron may get hotter than intended, and some may see this as a plus. And you may not have a problem. Until you do… My understanding is that higher power coming from the socket can damage the plug, cord, and/or iron, and potentially cause a fire. Maybe the risk is lower if you are using it for short periods and then turning it off/unplugging, I don’t know. But I specifically bought the iron without an auto off so that I could leave it on in during longer sewing sessions. I also understand that there IS a solution to this problem: buying and using a step down converter. But it looks like you need to pay attention to the rating of the converter (e.g., make sure it can safely handle 700w with enough leeway to account for power surges) and those converters are not cheap. I’d rather spend the combined amount on a better iron! I suppose your choice comes down to your own level of risk tolerance and how much you love this iron on its other merits. Speaking of its other merits… The iron is small and very basic, as expected. But it seems cheaply made and I’d be surprised if it lasted a few years even if the power issue didn’t kill it. But the most important negative to me was the sole plate. The non-stick coating on my iron was not completely smooth. It had a slightly bumpy area (like you might find on a cheap non-stick pan) which I think is a manufacturing defect or poor quality control. In the end, I would have returned this iron due to the roughness of the sole plate even if the power system wasn’t an issue. I will keep looking for my ideal sewing iron.

I returned every other iron. This is it. This is the one. I don’t steam iron, I hate how bulky they are and when they leak. Not an issue here. Less buttons, small let package, very comfortable handle. I was worried it might be too small, but it’s just a hair smaller than a normal iron which actually makes it easier to get in smaller or more uneven areas. On medium heat it removes wrinkles very quickly. The price is very fair especially considering shipping from Japan. One user has posted a photo translating the symbols on the heat dial. I’m just so happy an old school product like this exists. The weight and everything feels so nice to use and it reminds me of a proper old fashion iron like they used to make. I would say they don’t make them like they used to - but this one is an exception! I might buy a second or even a third to keep as back ups in case they ever discontinue this model.