Pool Cover for 10ft Round Above Ground Swimming Pools

I bought this cover for my Bestway Steel Pro Max round pool (3.05 m x 76 cm), and it fits perfectly.The biggest difference I've noticed is how much cleaner my pool stays. It keeps most of the leaves and debris out, so I spend a lot less time cleaning before we can enjoy the pool.I also really like the drain holes in the center of the cover. They allow rainwater to drain instead of collecting on top, and they also help keep the pool water looking clean.Last but not least, call me crazy, but I honestly think this cover helps the water stay a little warmer. It seems to retain some of the heat, which is a nice bonus.Overall, I'm very happy with this purchase and would definitely recommend it!

Like many of you, I read through reviews to see if this pool cover was worth buying. We have the 10' Summer Waves pop up pool and it works perfectly. Some advice to help the cover work perfectly:1.) Buy industrial strength velcro!!! I purchased the brand Stronghold in the 2" and it worked great.2.) Place the cover over the pool where you want it to stay in place.2.) Put 1 piece of velcro on the poles facing out (you don't have to put it on every pole, but for more stability you can).3.) The matching piece of velcro will go on the INSIDE of the cover.* Make sure you place the velcro on the pole LOW enough so the cover will be tight on the pool.* To help water from pooling in the center, we kept floaties with a beach ball in the center to give the cover some height from underneath.* Don't pull too hard on the cover, it definitely isn't super durable, and when it's in the sun, it will stretch, maybe ripping it accidentally. Be careful...Hope this helps!!! Definitely a good cover, but the string to tie it securely around the perimeter of the pool will not be enough.

The photo doesn't quite show the product we got, there are some differences. The logo placement, which is no big deal. Also, there are holes through the cover which allow the passage of air. These are a good thing, keeping a vacuum from forming, keeping the thing from acting like a wing in high winds and blowing off into your neighbor's yard. It's just that the photo doesn't show the actual product. maybe the one in the photo is an earlier model?We actually have the 13' pool, but there is no cover that size available, so we got this one. It works just fine despite the size difference. In fact, because we have the extra area, we don't have to take the ladder out to put the cover on. We just stretch the cover over the ladder. Which made me realize that if you DO have the 15' pool, you would have to remove the ladder to put the cover on. I'm kinda lazy, so that's not an appealing idea to me.The vinyl is thick and high quality, which matters a lot to us as we live in a desert with very high UV that destroys everything in a short amount of time.Even so, I've noticed a bleaching effect occurring around the areas with the holes. Not sure if that's the chlorine from the pool water, the sun's rays being amplified by the water on top of the cover, or a combination of the two. Pretty sure that's gonna be where the vinyl starts failing, though.I have noticed we lose hardly any water to evaporation when using the cover. Without any cover, we were losing 2"/day of water! The desert is a harsh mistress. We were using black plastic sheathing before we bought this cover, and I'm very happy with the convenience of the cover, the drawstring, the seams, all of that kinda stuff. Marked improvement over our rigged up cheapo cover. I do wish it were a lighter color to help reflect the sun more. It looks light blue, but is more of a medium blue, and it gets pretty hot to the touch in the full sun. When you remove it, it burns your hands pretty quickly if you're not careful. That's not the fault of the cover, though, and I see no way to remedy that except to shade your whole pool.For the price, it's fantastic, although i have a feeling with our harsh conditions, it won't last more than a year. That's par for the course here, though, so not really a minus. It's a good value. If you have the pool, you should get the cover. In fact, I think they only sell the pools with covers now, so that should tell you how much they help.

Works for the purpose intended. Very sturdy and keeps the pool clean. We haven’t had any rain come through it so holds up well with water. Thick material. Good quality and works well, would buy again.

Perfect love the holes on top help when rain water does not accumulate on top , event that debris or small leave fall to pool other tan that is good and strong material

A few months ago, I noticed my old cover looking like it needed replacing, so I ordered a new one, at the same price, but from a different company. A few days ago, I changed out the covers, laying out the new one to warm up and stretch out. It still comes nowhere close to reaching over the edges, so when I pull one side, it comes off the other. Do you have any clue how annoying/frustrating/infuriating it is to play a stupid game of tug of war with yourself where you are walking back and forth, pulling as lightly as possible, and the piece of human excrement just keeps pulling off the other side? So I decided to clip it to the vinyl, which makes it about a foot less diameter, plus the cover doesn’t have to go over any edges, so it should reach easily, right? No it doesn’t. In fact, I go back out and the pool cover now has 8 holes ripped in each of those spots. Not only is the cover not able to reach the edge of the pool, but the quality sucks so bad, it tears, even with the use of wide rubber clips. My old one has clips in it from where I attached the straps for the cover reel, and it still never ripped, despite hundreds of times being pulled on as it reeled in and out. Don’t buy this piece of trash. I’m so mad I didn’t try it out sooner so i could return it. I might spend the postage to send it back anyways. I miss the time where people actually took pride in their product and didn’t use lies, blatantly inaccurate photos, and amazon to cheat people out of their hard earned money. I thought, as a middle man, it was amazon’s job to ensure the customers weren’t getting scammed.

We have an intex 10' x 30' pool with the metal frame. We used a 12 foot round cover previously. Overall, I think we preferred that one because of how much more room you have on the edges that overlap.This cover has small holes between the size of a dime or nickle around the first two or three feet from the edge and they're spaced pretty far in between. The middle has a few more placed closer together. It is mainly to help the water back into the pool when it gathers. It will keep lighter debris from the pool. I wouldn't recommend this type of cover (with holes in it) if you have an extremely dusty or area with a lot of small debris that will gather on the cover. The main reason being is that it will end up getting some of it mixed back in with the pool water and you'll have to deal a bit more with cleaning it out. For those type of areas, i'd recommend one of the other covers that has no holes.Another thing, I think others mentioned is that it doesn't sit as tightly around the pool as in the picture. It is doable, but it's likely not to stay that way because it will stretch a little anyway and the heat will help with that. We use a small water inflatable boat (for toddlers....you can find them at the dollar store), it's about 2 feet by 3 feet in size- and place it in the center before we put the cover on. It helps the water only gather to the sides and makes it a little easier to handle when water gathers, either from rain or from the pool water coming up from the holes in the cover.It has a seam on it that is supposed to fit around where the metal frame of the pool is, but unless you get this thing pretty tight with the draw string, it's not going to sit like that. When water gathers, as it does noted earlier, you'll find that the seam tends to pull in toward the pool more, thus making the sides come up higher. As the sides come up, more water gathers and the cover starts to go under more....needless to say, if you baby it a little you'll be ok.I did have the same issue as others, the hole where the drawstring comes out ripped from trying to pull it much tighter. I'd think you might want to pull it tighter OFF of the pool- especially after letting it sit in the sun for a really short while....just to make the material a slightly more pliable/easier to work with. Just a thought.I think I am going to end up getting some plastic clamps from Harbor freight to clamp to the metal frame to help it set a little better- at least for longer periods when not being used. We only put our pool up in the summer, so it's not too much to work with this though.The pool water still gets pretty warm when the cover is on.Overall, it is a decent cover. I think with maybe a couple of metal grommets, or reinforcing, that might help it not tear when pulling tighter.It serves its purpose well and does what I expect it to do- cover the pool and keep out debris. I was aware of the holes and how much more "fitted" it would be versus a larger cover, but wanted to try it out.As a side note - our general setup and how we came to do things- for those curious about the "real use" in this review... with the 12 foot cover that had no holes, we do have a short pool ladder, so we'd use that in the center of the pool and put that cover over when not using. It made it more like a "tent" so water would simply run straight off to the sides. We also used a water pool "noodle" (another dollar store find) and cut a 4 to 5 inch piece off for each of the ladder legs so that it would be less likely to punch through the pool bottom. Since we the pool on cement, we also put down a set of those puzzle type foam mats directly under it.At any rate, I don't know if I would buy this product again yet. One other issue we had with the previous cover, the sun "cooked" the cover- that and I imagine the chlorine as well...to the point of it getting brittle and cracking. This was with 3 summer seasons of use. I've only used this cover for about 3 weeks, so I have yet to know what will happen with this one.Aside from that. for the price paid and "cost per use ratio', I'd say it will wind up well spent.Besides, my kids are having a blast in that pool regardless of what the cover is doing or not doing.

Fits our 12 x 12 pool great. Love the drawstring feature. Its really thick and keeps debris out of the pool.

Not a bad cover had to install grommets so I could tie it to the legs of our pool. The rope it came with did not hold it on when windy.Still I have had several covers over the years and this one is the best yet.Probably only going to last one season but so did all the others.And it was much cheaper.

att den fungerade utan problem

Pool cover excellent

Awesome cover

Fast delivery works as intended