WALI Triple Monitor Stand, Free Standing Three LCD Monitor Fully Adjustable Desk Mount Fits 3 Screens up to 27 inch, 22 lbs Weight Capacity per Arm (MF003), Black

Great stand, if you don't mind having to rotate the left and right ones. At 27", which is the max for this stand, you can't tilt the outer two monitors toward you which makes it impossible to see without rolling back and forth in your chair. I wouldn't suggest this stand if you are a gamer, because you can't articulate the monitors in, but if you're a broadcaster or digital content creator, this works like a champion.

I was pleasantly surprised at the durability of this stand. I use a stand up desk with three monitors as an IT professional but didn’t want a bolt on product. This stand is heavy duty and has enough weight to balance the 3 24 inch monitors I use with it while being steady enough to stay in place even while moving the desk up and down. The price is reasonable and a good value in my opinion.Additionally, there were some nice touches like cable clips to keep the power and monitor HDMI cables in place and the X steel plates to attach to the base of the monitors. Additionally all tools required to put the stand together are included. The base is wide but slender so it actually took up significantly less footprint than the three monitor bases that were there previously.My only constructive criticism would be to revamp the installation instructions a bit. This setup came with the ability to build the stand as a standalone base that sits freestanding on top of the desk OR a bolt on installation that clamps the stand to the desk. Hardware for both installations are included in the box with the base design listed as 1a and the bolt on design as 1b. You use one or the other but not both.Overall, an excellent product at a good price. Nice to see such great quality that lives up to its claim.

Solid and sturdy. Only reason I didnt give it 5 stars is because it is made in China.

I love the mount, but its REAL tight with (3) 27 inch monitors. The screws were either too shallow or too deep for my monitors so I had to add washers (as spacers). It took some work to get them to line up right but if these monitors were half a millimeter wider, they wouldnt fit. Love the outcome tho!! Worth it in the end

I have 3-27in Acer monitors, the two outside ones are the same model and the center one is a slightly curved model, which is why the color is a bit different. So I had them set up on their individual stands and the two outside ones at about a 25 deg angle from the center one. This allowed me to multitask easily by just turning my head slightly and getting a fairly straight on full level view of the text or images on the outside monitors that was comfortable and not an eye strain. I was upgrading some items for my new apartment like new router and security camera and as an impulse thought I'd buy a 3 monitor stand and clear some clutter from my desk I normally have a lot of clutter... I could go into more detail about why I chose this brand and model but thought it would give me more "adjustment" options.Ok, so the problems: in the first image is kind of what I had as a set up, BUT, with 3x27in monitors you can't get that angle as the arms do not bend that way... with 3x27 they are basically straight out and you are looking almost 3 feet sideways left and right to read anything and it causes really bad eye strain, and with 3x27 the 3 monitors stretch out a full 6ft wide and if you do try to bring the angles "in", the monitors overlap and also become tipsy and unstable. It would appear I'm going to have to return this and get the Clamp On style that has much more adjustability but also for 32 inch monitors so I can pull them in without them hitting each other.IF I decide I do want a triple mount, this is the next one I'll try as it's takes 3x32 inch, so I should be able to get my 25-30 deg viewing angle and get all three to match height and edges and be LEVEL...https://www.amazon.com/dp/B084RF63FK/?coliid=I2E2XTUKP2XVBV&colid=1VUTOUBL4X5NS&ref_=list_c_wl_lv_ov_lig_dp_it&th=1

I purchased this stand to have 3 27inch 2560x1440 monitors, with the side ones angled towards me in a typical 3-monitor setup often seen being used by racing or aviation simulator guys. This stand's arms for the two side monitors are not long enough to have said monitors angled more than 5 to 8 degrees meaning they are forced to be completely linear which is incredibly awkward to try to use because you can barely see or use the screen space on the far edges.𝐖𝐢𝐭𝐡 𝐭𝐡𝐞𝐬𝐞 𝐬𝐢𝐳𝐞 𝐬𝐜𝐫𝐞𝐞𝐧𝐬, 𝐭𝐡𝐞 𝐨𝐧𝐥𝐲 𝐰𝐚𝐲 𝐭𝐨 𝐡𝐚𝐯𝐞 𝐞𝐯𝐞𝐧 𝐨𝐧𝐞 𝐚𝐭 𝐚𝐧 𝐚𝐝𝐞𝐪𝐮𝐚𝐭𝐞 𝐚𝐧𝐠𝐥𝐞 𝐟𝐨𝐫𝐜𝐞𝐬 𝐭𝐡𝐞 𝐨𝐭𝐡𝐞𝐫 𝐦𝐨𝐧𝐢𝐭𝐨𝐫 𝐭𝐨 𝐛𝐞 𝐢𝐧 𝐩𝐨𝐫𝐭𝐫𝐚𝐢𝐭 𝐦𝐨𝐝𝐞, 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐦𝐞𝐬𝐬𝐢𝐧𝐠 𝐮𝐩 𝐭𝐡𝐞 𝐰𝐡𝐨𝐥𝐞 𝐩𝐨𝐢𝐧𝐭 𝐨𝐟 𝐛𝐮𝐲𝐢𝐧𝐠 𝐭𝐡𝐢𝐬. The product description should not say it can hold 3 27 inch screens because the amount of struggling I had to do to get it to be acceptable was ridiculous.The stand is... not heavy enough to safely hold monitors of this size either, and additional weight was required ( 2 10lb dumbbells in my case ) configuring the height of your monitors with this stand can be dangerous as well as they could fall down the central post so you have to be extremely careful, but, it is pretty easy other than that.It is a great option if you don't have a desk with an edge for typical stands ( I don't. ) You can place the stand anywhere, and you don't have to drill through your desk if you really don't want to. The cable clips are a very nice included bonus, and they sent me a replacement without any hassle when I totally effed up my first attempt at setup.But, I would have shopped harder and got something else if I knew all this prior all the same. Maybe even bought a gigantic curved screen instead.