APPS2Car Magnetic Phone Mount for Car, Dashboard & Windshield Suction Cup Holder with Telescopic Arm, Requires Metal Plate for Proper Use, Fit for Android Smartphones(NOT for MagSafe)

I love this thing. Its sturdy, retractable. You can swivel it to face whatever direction you want. Powerful magnet. I had one similar but the swivel aspect of it got weak and would always just flop down, causing my phone to face downward towards the floor. Installing was easy and simple. Put it exactly where my other one was, once I removed my over one and wiped it down.

Hands down the best car mount on the market. I use this in my Dodge Charger, and as long as you place one of the metal plates inside your phone case, your phone stays locked in place until you pull it off. My only critique is the suction/adhesive struggles in extreme Midwest summer heat. Since my car sits out, the mount eventually degrades after a couple of years. My October 2023 purchase finally gave out, but it's such a stellar, convenient product that I am ordering a replacement anyway.

I have been using the APPS2Car Magnetic Phone Mount daily in my SUV since early 2023. After three years, through summer heat and cold winters, this mount has proven to be an incredibly reliable piece of gear. Here is my honest, long-term breakdown of how it holds up. You must stick the included metal plate to your phone or case. I placed mine on the outside of my phone case. The magnetic pull is incredibly strong. My phone has never fallen off this mount, even when hitting potholes or driving over rough railroad tracks. The suction cup uses a sticky gel base combined with a vacuum lever. I mounted it to my windshield in 2023, and it has only lost suction once during the early days of use. A quick rinse with warm water restored the stickiness instantly. The extendable arm is excellent. It brings the phone close to my fingertips. It does vibrate slightly on bumpy roads when fully extended, but not enough to blur the screen. The best part of this magnetic mount is the speed. I just slap the phone onto the pad when I get in and pull it off when I leave. No fumbling with side clamps or spring-loaded grips. It has great adjustability. The ball joint allows for easy switching between portrait mode for navigation and landscape mode. I think this is one of the most durable and secure suction-based mounts on the market. Three years of daily use proves it is built to last.

Sticks very well to windshield. Very easy to position. Magnet is OK but could be stronger

This phone mount worked perfectly for me. It allowed me to position my phone exactly where I wanted it. I have not yet done any driving. I will update my review after driving a couple days with it mounted and the phone attached and charging.

My daughter recommended this to me after I had a few others that did not work, it sticks to just about any flat surface in your car and it hold your phone exactly where you want it, phone does not come off the magnet until you take it off. Powerful suction and magnet. Absolutely would buy again!

This is a great product. I've used almost 100 different magnetic mounts and this one is one of the best due to it's magnetic strength and versatility.The magnetic strength is one of the strongest I've dealt with, definitely no worries about using a full sized tablet with this (tried with a Samsung Galaxy Tab S3 with no slippage even on bumpy roads). But this probably contributes to the minor flaw that I'll describe a little later.The build quality is great. Everything is mostly solid.The suction cup had 2 methods of adhesion that works together. First, there's an actual adhesive, which alone would be enough to keep on my dashboard without moving. Then there's the standard lever suction, which adds more security, especially if mounted to windows.The elbow adjustment locks with a turn knob which keeps it mostly solid. The main issue I have is the arm that extends. They market the fact the main arm can be adjusted with one hand due to the fact it uses a spring and bearing detend so you can just extend and retract the arm by a simple push or pull. While this is true, it leads to a problem I've come across. Like I mentioned earlier, the magnets are strong. If you adjust the arm to a length that is NOT at full extension, you'll more than likely end up pulling it to full extension when removing the phone from the mount. The magnets are so strong that they overpower the strength of the arm detents. My perfect adjustment is with the arm fully retracted (shortest length) and when trying to pull my phone straight off, it pulls the arm to full extention. I've found 2 ways to remedy this without permanently altering the product.First, place the metal plate between your phone case and phone. This increased distance decreses the amount of magnetic force being applied, allowed the device to be removed with less energy. On my phone, the metal plate is on the outside of the case, so this option does not work for me.Second, pay attention to how you pull the device off the mount. Depending on which metal plate you use (it comes with 3 different size/shapes) lifting it off the mount from one side decreses the energy required to remove the device. Using both the rectangle plates on the outside of my case, I was able to remove my device without accidently extending the mount arm by lifting the device off the mount from one side. When in portrait orientation, if I life my phone off from either the left or right side only, it comes off without extending the arm.Overall, one of the best mounts I've used.

Holder works OK, but there is no set screw on the telescoping arm. So, when the phone is removed from the magnetic pad, the telescope slides out to maximum length. It’s really no big deal, however, I would prefer removing the phone and forget about resetting the holder. I missed the lack of a set screw when I bought it.

This APPS2Car magnetic phone mount is a practical and dependable choice for hands-free phone use in the car. The suction cup is incredibly strong, with excellent stickiness that keeps it firmly attached to my dashboard or windshield, even on bumpy roads. It feels very sturdy and doesn’t wobble, giving me confidence that my phone is secure at all times. The suction cup also works on other surfaces like desks and countertops, making it versatile.The installation was straightforward and hassle-free. The mount sticks well to smooth surfaces, but for textured dashboards, the included VHB pad ensures a solid hold. Adjusting the fit is simple, and the mount stays put once it’s positioned.The 6 magnets hold my phone firmly, even with a bulky case, and the adjustable telescopic arm with 360° rotation makes it easy to find the perfect viewing angle. The extendable arm and one-hand operation add to the overall convenience.It’s worth noting that it’s not MagSafe compatible and doesn’t have charging capabilities, but that wasn’t an issue for me. If you’re looking for a sturdy, sticky, and easy-to-install phone mount, this one checks all the boxes. Highly recommended!

magneet is sterk genoeg en degelijk constructie

Après plusieurs mois d'utilisation, je suis ravi de cet achat.Les points positifs :- Très facile d'installation, pensez à bien nettoyer la base afin que la ventouse s'y colle solidement- Plusieurs aimants à coller derrière le téléphone livrés avec, ce qui permet d'en coller de nouveaux en cas de changement de téléphone ou si vous possédez plusieurs téléphones (ma compagne en a installé aussi dans sa coque, et peut facilement installer son téléphone dans ma voiture)- Aimant puissant, mon téléphone n'est jamais tombé du supportPoint négatif :- L'aimant peut laisser des traces sur votre téléphone, même après nettoyage. J'ai constaté quelques rayures sur l'arrière de mon téléphone, peut-être que l'aimant bouge légèrement dans la coque ou autre, mais en tout cas des micro-rayures sont là)- Récemment et après plusieurs mois, la ventouse est tombée de son socle. J'ai tout dépoussiéré et nettoyé à nouveau mais la ventouse est retombée peu de temps après. Peut-être un problème avec la succion qui ne se fait plus aussi bien avec le temps, ou plus probablement le plastique de la ventouse s'est dilaté avec les dernières chaleurs de l'été, à voir par la suite !Malgré tout je recommande le produit, le dernier problème est récent et je mettrais à jour cet avis si il se reproduit après l'été.

Perfect

Leon için en son araştırmalarımda bulduğum tek ve mantıklı bi ürün torpitonun üzerine sağlam yapışıyor düşme yaşamazsınız kullanışlı