ACASIS Powered 16 Ports USB 3.2 Hub, 10Gbps Data Transfer, 96W Adapter

My new lap top did not have enough available USB ports for all of my equipment. I also wanted a Hub that was more powerful than my older 3.0 hub. This hub is a 3.2, AC powered and runs everything that I have plugged into it. It is very compact so it takes up very little space on my computer desk. I especially like that each port of the hub can be turned on or off as needed. The seven ports are all standard USB with no "C" port; however an adapter is included in the package. I would buy this again.

The device appears to work well. I would have liked to mount it on the wall but it has no mounting hardware. This is not uncommon so it isn't that it's bad in any way. Many don't have a way to mount it. Some double sided tape will work but I would have liked some lugs with screw holes on the ends to accommodate the mount. The connecting wire (usb-a to usb-b) would be nice if it was just a bit longer but it just reaches the connection on the back of my computer so it will work as well, just a little tight. Overall it did increase my speed of transfer from the previous one I had which was quite a bit older so that is a good thing. The power supply is fine but could have used the wire-block-wire method instead of the plug in block. I had to shift around some items on my power management block to find a place to plug it in without blocking other outlets but I got it worked out. It is in a metal case so it should be very durable and hold up under pressure. I could recommend this device if you are in need of such a thing.

As expected, works fine

I picked this up, as I needed more ports. My previous hub is a Startech HB31C3. Pros: - Lots of ports - Individual switches - USB-A; perhaps a con to some, but I prefer this form factor for a desktop hub. Can just use A-to-C adapters - True to spec I initially thought this hub was significantly affecting my RF environment, but I was mistaken. It was an emmc reader. No complaints thus far!

I have 5 4-Disk RAID-5 arrays that I attach via USB-A connectors. This is the third USB 3.2 Hub I've tried. The other 2 had problems with the arrays disconnecting, often while copying files. This one, however, is working great and is rock solid. My older PCIe 5-port USB 3.0 adapter was starting to feel slow, so I figured I'd switch to an external hub to make it easier to replace, and get a USB 3.2 hub for faster transfers. I've copied about 30GB of files to the arrays so far, and I've had no disconnects with this hub. I have a large transfer of a few terabytes to do from one of the arrays to another, but I haven't done it yet. I'll update this post after I do that transfer.

Seems like a quality product. Had one hiccup where one slot didn't read the USB flash. Not sure if it was the product or the USB flash drive. The next time I tried it everything worked. Overall I really like it. I have the seven slot and the 10. They're fast.

Exactly as advertised. Has not been put to serious test yet but works well mof my purposes.

All around great, tons of USB ports, very easy to use, and visually solid. I highly recommend this to anyone who is worried about running about of USB ports on their set ups or needs it to be more organized and easy to configure

First impression well built good quality alumimium casing. Each port can be switched on/off and when on it emits a blue light next to port in use. I find the blue light not too bright and not bothersome. Comes with 2 USB cables in which to connect to PC depending on the type of USB port you have on your PC. Currently 7 peripherals connected and all are working fine. Data transfer I find is fast being USB 3.2 hub. Also used to charge up Android smartphone which it did reasonable quick. Only minor issue I would have liked the weight of the hub to be heavier. Hub is quite light and when you have numerous peripherals plugged in the weight of the USB cables can cause the hub to move a little. Apart from this I find the design aesthetically pleasing on the eye. Price is a little heavy but it does the job thence 1 star knocked off to give 4 stars. Overall I would recommend this product.

Habe mit Montagekleber an die Wand geklebt, man kann sie auch schrauben! Funktioniert gut!

Excelente cualidad!

Good seller

Costa ma vale la pena comprarlo . Un hub alimentato é assolutamente necessario se si hanno chiavette e Hard disk e si ha necessita di velocità.