Snapit EyeGlass Repair Kit, With Long Easy Fit Screws And Micro Screwdriver. Perfect For Fixing Sunglasses, Spectacles, Glasses And Reading Glasses. Used By Opticians.

Perfect just what was needed to repair glasses

I am reasonably dextrous, but working with teeny tiny screws on eyeglasses is beyond me. But with the extra long locater tip on these screws, it took me 30 seconds to fix my favorite pair of glasses. Worth every penny to get the job done.

Just what I needed as one of my screws is stripped and tightening it didn’t help much, so I replaced the screw. Tiny screwdriver is great to tighten those screws on the bows!

Used on a pair of RayBan RX glasses (5237) - worked as expected and saved me from an expensive replacement set.

There are only 5 screws included in the package, and a tiny, cheap screwdriver that is hard to use. The snap-off screws are a good idea, but if you need to fix two pairs of glasses that have the same size screw, or both sides of a single pair, then you are out of luck. All but one of the screws were too large for my glasses, so basically I paid 6 bucks for a single tiny screw and a cheap screwdriver. I bought this to fix two pairs of glasses, but could only fix one. The least they could've done is include two of each size of screw. NOT worth the price. This is the last time I ever buy anything that says "as seen on TV." A total clickbait ripoff!

Several types of screws but if you need 2 of the same you’re out of luck

I have ordered these twice. I have two pairs of glasses. I need them everyday. I am hard on them and broke them. I ordered these replacements and I was able to fix both pair. It saved me time and money. I did not have to go to the eye doctor and pay for a repair that would take days. I purchased these and it took less than a minute to fix my glasses.

I would suggest making the screw driver magnetic at tip to more easily insert these very small screws.

This is a really good product. I’m new to glasses so I didn’t know whether the screws would fit etc. but they did. There’s a selection of screw sizes so should be fine for most glasses I presume, and the snapping of the end of the screw is really easy. The whole product is well thought out and easy to use. Only thing I would be a little critical of is the size of the handle on the screw driver, but I have big hands and when you get this, you’ll understand it’s size. If anything is value for money when it comes to eyewear, this is it!

I lost the screw from my glasses and this kit meant I could repair them quickly. It was easy to use and came with a variety of different sized screws. Small enough to fit in a handbag in case of emergency. Good value.

One spring hinge had been distorted and re-screwing the existing screw was becoming less effective as presumably the thread was stripping and the screw was misaligned. SNAPIT solved the problem by providing a small selection of screws of differing width and length. Not that easy to differentiate with the naked eye so tried a couple before finding the best fit. The USP of SNAPIT made it much easier to drop in the new screw and the screw quality made it easier to presumably re-thread as it was slowly and carefully screwed in place and then the excess metalsnapped off.May just have been lucky but it worked first time and provides a seemingly robust and neat repair. Weĺl worth trying.

Ironically you need to wear a pair of spectacles to repair your glasses, so unless you have two pairs to start with, you're a bit stymied.It all seemed to be working perfectly. Drop the screw in the hole using the long spear as a guide, then tighten and finally break off the long end. All the screws have raised heads but I could really have done with a countersunk head as the screw thread was not long enough for me. I'd lost the screw that holds a lens in place and that needed to have a longer thread than the ones supplied. If you are replacing a hinge screw, then it would probably work.A good idea, fairly easy to do but not for me.

Bought this kit to fix my glasses, as screws were missing. It has a variety size screws ,either longer or thicker or shorter size screws. Made it a lot easier to screw the screws in place by inserting the post first as a guide, then once screwed in, snap off.