KREATEIT Nema 17 Stepper Motor with 1m Cable 42 Mstepper Motor 1.5A Motor for CNC XYZ 3D Printer 5pcs+ 5pcs Wiring
描述
- HIGH TORQUE: Adopting high quality motor steel material,rotor 3d printer stepper motor kit is provided with high torque（≥420mN.m/60 oz-in） ,low self-inductance reactance, responsive and can avoid system error.
- LOW NOISE: The internal rotor of our KREATEIT stepper motor kit is made with introduced German craftsmanship and there is rotor rubber covering the rotor, effectively reduce the noise.
- DURABLE & TOUGH: Our mini motor uses high hardness metal, tough and durable. And the matte texture in the side wall can increase friction.
- WIDE APPLICATION: This small motors can be used in various area, such as stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; 3D printer; automation equipment, and etc..
- WHAT YOU GET: The package includes 5pcs* 42 Stepper Motor+ Wiring .
This is high torque Nema 17 stepper motor with 1.8 deg. Each phase draws 2A, allowing for a holding torque of 42Ncm(60.0oz.in). It's ideal for the RepRap Prusa, Mendel 90, Creality Ender 3 ,Creality Ender 5, Creality CR-10S,Anycubic Full Metal i3 Mega,ANET A8,Anet E10,Rostock and similar 3D printers, as well as CNC and robotics applications. The motor is supplied with a 1 metre long power cable with a 4-pin Harwin female connector already fitted - ready to plug and print! Electrical Specification: * Manufacturer Part Number: 17HS4401 * Motor Type: Bipolar Stepper * Step Angle: 1.8 deg. * Holding Torque: ≥42Ncm(60.oz.in) * Rated Current/phase: 2A * Phase Resistance: 2.4ohms * Inductance: 3.7mH+/-20%(1KHz) Physical Specification: * Frame Size: 42 x 42mm * Body Length: 40mm * Shaft Diameter: 5mm * Shaft Length: 21.5mm * D-cut Length: 18mm * Number of Leads: 4 * Lead Length: 1000mm * Weight: 300g Connection: red(A), blue(C), green(D), black(B) Warning: * As a stepper motor, it should connect to a constant current or chopper driver. Connecting the motor directly to a power supply will destroy the motor. * To choose a driver, please make sure the driver's output current not higher than motor rated current, and voltage not higher than 36V. * Please take care of four wires coils order when you connecting to driver, or it will damage your driver.
