FTCBlock Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino (2pcs Boards+2pcs Cables)
描述
- Matters Need Attention:Before running the procedure, pls install the corresponding computer system CH340 driver.
- Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.
- More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
- Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version.
Full description not available
评论
D**H
Works just fine just like Arduino Nano. YOU HAVE TO SET ARDUINO IDE SOFTWARE CORRECTLY.
Couldn't program it until I looked up how to set up the Arduino IDE properly. You have to set (in "Tools"):Board: Arduino NanoProcessor: ATmega328P (Old Bootloader)Port: COMn: where n is usually 9 or above - it will pop up on the menu. Never COM1: (which is on the motherboard of your computer.)After trying to communicate a bunch of other settings, I found this in another Amazon review. If you still can't communicate after this, reboot your computer because Arduino IDE sometimes scrambles your COM port when connection is unsuccessful.It is a nice board and the price is right!
J**N
OLD BOOTLOADER - it's not a big deal just as long as you know that this needs it
I struggled with it a few times because you didn't come with any documentation, but I played around with it and I figured out what it was an old bootloader version of the chip.It works great for what I need it for!
N**L
It has a bootloader just not the new one.
I initially thought this didn't have a bootloader but after much searching I found a fix. The solution for me was in IDE: Tools -> Processor -> ATmega328P (Old Bootloader). When I changed that setting I was able to program the nano as expected.
L**Y
does not allow for uploads using standard IDE needs loader
Product does not allow uploads. AD says some computer driver needed but What? No mention of what or how to get it? I'll keep looking but so far DOA. Well I found that it missing the ISP bootloader. Easy fix, google it to see how to easily add the boot loader. Once loaded unit functions well.
A**R
Worthless Junk!
Chip has no bootloader. I have to purchase a known working Ardunio to copy the bootloader. If I have to do that I will just throw this in the garbage and use the real thing! I thought I was getting the real thing when I bought this but now I know. Don't waste your time with this junk.
D**A
requires driver
Unlike the original this requires special Usb driver, was difficult to install. But works fine once installed
A**R
Great unit
Works great!
M**S
Good
Good board components a little bulky
