FD-MOTOHardened Flip Up/Down Steel Ground Wall Chain Anchor Motorbike Lock (4 Bolts) Security Locking Point for motorcycle bike bicycle

This seems very sturdy and secure, i kicked at it a couple of times and there was absolutely no moment so I'm pretty happy with it, it's attached to the side of the wall rather than the floor and seems to hold up pretty well, seems like good value for money

This is a review of the loop style (so called 'matt black') option here.I'm really not sure how anyone would think the back of the packaging is an actual template for the hole drilling!!It quite obviously isn't a template (see my photos) - you only have to look at the holes in the actual anchor base to see that.Just use the base as a template!!This is an excellent anchor and is easy to fit to either a masonry wall or concrete floor.In addition you will need a 16mm diameter masonry drill bit with a good hammer drill and a hammer!The 2 hex (or Allen) keys needed are supplied, as are the main expanding bolts, plastic screw caps and ball bearings to make the main bolts anti-tamper once fixed in place.Undo the 2 black screws holding the plastic cover to the base with the smaller of the two hex keys.Use the base as a template or take the required dimensions from the back of the packaging (these dimensions are correct as written, it is not intended as a template). Mark the wall with a pencil - make large crosses or your marks will disappear as you drill.If drilling into brick, and certainly if drilling into concrete, you will need a powerful, mains powered hammer drill - preferably an SDS type. A cordless hammer drill won't be up to the job - unless of course you are drilling into a softer cinder block wall.It's a good idea to drill first with a smaller diameter masonry drill bit to give an accurate pilot hole and then drill with the larger 16mm bit. Drill to at least 70mm deep (a bit of tape on the drill as a guide or keep inserting a pencil at frequent intervals to check the depth).Then, importantly, vacuum the dust out. Don't blow, unless you want a face full of brick dust!Insert the 4 silver expanding bolts into the holes. Keep the bolts lightly done up in their housings to do this otherwise you could lose the correct engagement of the expansion piece on the end. Make sure the housings are all the way into the holes and flush with or just below the surface, then unscrew the bolts from the housings completely.Put the base in place and fasten with the bolts into their housings using the larger of the two hex keys until very tight. The bolt housings will expand outwards as you tighten, to grip the inside of the holes you drilled.Once happy with the tightness - bearing in mind (no pun intended) that this is the point of no return - take the 4 ball bearings and hammer one into each of the silver bolt heads to prevent any attempt at unscrewing the anchor.Then replace the plastic cover and fasten with the black screws (removed earlier) using the smaller hex key.Put the plastic screw caps in place.All done!This is a really good value anchor at this price. The loop is a good size for a chain or a D-lock and is very sturdy.All welds are excellent and well finished too. The black coating on the iron work appears tough and very well finished.Obviously anybody with an angle grinder will get through it eventually, as they will with any locking device, even sold secure gold or diamond locks can be cut that way.This is as sturdy as some (named) anchors costing much more.Thoroughly recommended!Great value, quality anchor.Definitely worth buying!

Bought a bigger more expensive ground anchor and the bolts just failed, this beast went in no problem and is solid ! Lovely sleek fold away design as well

I have to say, it’s a great item. It does exactly what it claims on the box, providing a solid and secure anchor point for my motorbike. I had it installed in my garage, and it gives me a much greater sense of security knowing that my bike is safely locked in place.The build quality is impressive, and it feels like a durable, hardened steel anchor. The flip-up/down mechanism works smoothly, and it’s easy to use, making it a convenient way to lock my bike. Overall, it provides peace of mind and adds an extra layer of security.However, I did make a mistake during installation. I used a small SDS drill to make the hole in the concrete, intending to enlarge it with a bigger drill. This was a bad idea as the slarger drill bit got stuck, which made the process more difficult. I’d recommend using a larger drill from the start to avoid this issue.Pros:Strong and durable construction.Provides an additional layer of security for motorbikes.Easy-to-use flip-up/down mechanism.Cons:Be cautious during installation; a smaller drill may get stuck when enlarging the hole.Final Thoughts:Overall, this anchor lock does exactly what it’s supposed to do, and I feel much safer using it. Just be careful during installation to avoid any potential headaches. Once it’s in place, it’s a reliable and secure choice for motorbike security.

This thing is amazing! The quality is great and it was so easy to install. It's really sturdy too. I would have expected it to be a little low on quality for the price, but I was totally wrong. This is a big money product for a small price.

Bought this to secure my garden tractor in a carport. It's a hefty piece of kit, solid as a rock with big fat fixings. This ain't coming out of the ground. You even get little ball bearings to knock into the alun key holes so it can't be removed (not shown in photo). It's taken a really chunky chain with plenty of room for a thicker one. Very Happy (even if I did spend three days on-and-off drilling into the concrete!)

Threading a big chain through is quick (if you need to remove it when not in use)The shackle neatly folds away giving a discrete presentation when not in use at the front of a house.Four anchor bolts, good and well priced product. ✅

Does the job and is solid in the ground but rusted the first time it rained and looks a bit rubbish now.