Miracle Sealants High-Gloss Finish Sealer for Tile & Stone, Water-Based, Quart

I have a stone shower that looked like no one had ever cleaned much less sealed when we moved into our home. Calm down- it was a foreclosure. After spending SO MUCH TIME figuring out how to handle this, I found stone cleaner and this sealer both by the same company. The cleaner got all of the gunk off of the stone and grout, but there were still some spots that were lightened by past cleaning mistakes or hard water. I cleaned it again. Once it was thoroughly dry, I put on a total of 6 layers of this sealer. Yes, 6. It took that many for me to get the results. But now my shower looks fantastic. I used heavy duty gloves and rags to apply. It wasn’t difficult, just time consuming. I haven’t had any issues with slipping or the tiles becoming slippery after applying. Cleaning has become so much easier too. I’m happy I chose this sealer and will use it again.

Funciona bien y fácil aplicación solo dura muy poco si es un piso que limpias con frecuencia o cae agua porque se quita rapidito

Being an avid reader of comments prior to buying, here's my take on things that get mentioned:- Yes, it smells. Most good sealants will. It's not overpowering in any way, and I have a sensitive sniffer. Now, I'm only doing four 1sqft tiles at a time, so keeping it to a small amount each application will help keep the smell in check.- It does go on milky and dries clear. When I first applied, I did what the instructions said, and evened it out meticulously - that was a mistake, for my project anyways. It seemed far too matte when I did that. It wanted to be slathered on, milky spots and all to get a the glossy shine. Two very wet coats, and my tiles look amazing.Things to note: not all stone will react the same. Porous stone is best. Applying this to porcelain therefore makes no sense. As well, note the temperature and particularly the humidity, indoors and out, when applying. Yes, even when applying indoors, the outdoor humidity will absolutely have an affect on drying and reapplication time. Doing these with dew points outside in the 20's and 30's, and I was reapplying in 10 minutes, and the smell dissipated quickly.Good luck!

easy to apply, great result

I used this sealer a few years ago on a few DIY projects, and I loved the results! It gave the tiles a beautiful finish. Super easy to apply, dried nicely, and held up well over time without yellowing or peeling. 100% recommend!

It has the consistency (viscosity) of water,. and one must use sparingly on non-horizontal surfaces to avoid runs. This means using several thin coats. Happy sealing!

You ever go to a high class place and wonder what they used to get the tile/brick floors looking like they were "wet" because they were so glossy and awesome looking?They might be using Miracle Sealant because that's what my floor looked like after I applied it.I just bought their applicators, but you can probably use any pad with that material and get the same results. But why? Theirs were inexpensive and right there and I knew they would work.Easy application. Spill on and keep pushing (or pulling) the pad in the same direction the entire time over the entire surface to apply. Wear gloves. If you are sensitive to VOC's, get a respirator (not a face mask, a full face respirator with OV (organic vapor) filters - might run $150+; worth it and reusable if you are sensitive). The stuff is low VOC, but if you are in an enclosed area, it gets to 'ya after 10 minutes even with a window/fan.I did two applications. I thought about three, but after two the floor looked so glossy-wet, that I figured I'd see nothing but glossy-reflection if I applied a 3rd coat. Pretty amazing.I used about 1/2 of the bottle on 120 Square feet of unglazed porcelain tiles to do 2 coats (so really, 240 square feet)- that is about 33% more tile coverage than the label said! I'm sure other tiles/brick would have sucked up more, though and put it right at what the label said - about 360 square feet covered.Fantastic product to truly get that "ritzy" feeling for your tile!Now, you know this one works and your search might end!

I would most definitely not call this a “sealer”. It is white with a slight blue tinge and smells a lot like another floor covering liquid that produces a high shine that was popular in the 60’s and 70’s. I was really curious, so I went to their website to find the ingredients, to no avail. Not even in the chem sheet. More searching online produced the ingredient list — I wasn’t surprised to see almost identical ingredients. This is not a sealer for tile. You shouldn’t need to “re-seal” your floors once a month after using this product, and that’s what it says on the back of the bottle.