NVMe Heatsinks for M.2 2280mm SSD Double-Sided Cooling Design（red）

Easy to assemble. Great fitment. I have black, red and blue ones. I use these colors as an easy reference to what kind of drive is in use.

I bought this product for looks only but boy was I surprised to see the quality of materials and workmanship involved in this product. The package looks like a SATA SSD drive and then you open it in half to see everything laid out nice and neat for the install. It worked flawlessly on my ASUS Crosshair VI Hero motherboard, and the heatsink even came with extra screws and one worked to screw down the NVME drive/heatsink to the motherboard (I don't know about you, but I built this system a couple of years ago, and I cannot remember where I put the Corsair screws from the case for the NVME mounting screws, lol). The product come diss-assembled and ready for your NVME install. It took less than 5 minutes to screw the heatsink together, sandwiching the NVME drive with thermal pads (supplied by the way, nice touch!), and then the final screw to attach the drive to the motherboard. I apologize for no pictures as I have a water pump / reservoir installed temporarily in the case blocking the view of the heatsink. Last thoughts. I would buy from this supplier again in a heartbeat! I kept the SATA SSD-like box because it looks too cool to toss out. A+++ Thanks again!

Easy to install, fits perfectly. Nice way to brighten up a motherboard.

...Works so far. No functional problems to report.Note on install: Seems like a very tight fight/pressure when using this with its thermal pad but pushed down, but used. Held breath. Works.Maybe a slight design change to decrease the pressure when pressing the heatsink onto thermal pad and M.2 card.

Very nice heatsink/cooler for the M2 NVMe SSD. I picked up two, one red and one blue for my 1TB Western Digital NVMe SSDs. It is very easy to put together and fits the SSDs well. In this kit, you get three silicone adhesive pads (one for the front, one for the back and one extra) and seven screws (6 +1 extra) to hold it all together. The fins help dissipate heat and the different colors add some pizazz to your system. Very satisfied and would buy again.

I am shocked at how well this is working for me. I am running a Samsung 970 EVO plus. In my original build I was using the motherboard's m.2 heatsink, but due to some build changes I wasn't able to fit it back on. I was very skeptical of the "sandwich" model this heatsink uses, but there isn't a lot of variety in aftermarket m.2 heatsink/coolers at the moment so I figured for the cost it wouldn't hurt to try it.With no heat sink installed I was very easily able to get my m.2 up to 61 degrees C by running a simple read/write test on the drive for about 75 seconds, at which point I shut off the test. When I shut it off, it was still climbing a degree every 2-3 seconds. After installing this heat sink, I let the drive come up to the normal running temp (around 43C before and about 40-41C after in my case) and re-ran the same test as before. This time even after running the full test twice (about 3 minutes) it was still only at 48C and seemed to be holding pretty steady there. I did not remove the product sticker from the SSD, either, which would probably get me even a little better heat transfer.Installation was pretty straight forward. I wish there was some sort of alignment notch to help make sure the m.2 drive was properly centered in the heatsink, but it was easy enough to check and move if needed. Since I saw others mention having to buy thinner thermal pads - I don't know if the thermal pads have changed or not, but I had no problems using the ones supplied with the heatsink.

I don't know how necessary a heat sink for a SSD is, or how well this one will do the job, but it looks fantastic. I got the red version and very happy with it. I'm sure it will look great in my computer.

Nice packaging. Simple instructions. Came with everything necessary for install. Lowered my benchmark temps for a rear of the motherboard mounted ssd in an open case test setting by around 17-20 degrees C. Unfortunately, this heatsink is slightly too thick for seating my GPU appropriately in a 4L sandwich case. My fault, not the product's. Would definitely use in a system with fewer clearance issues (at its price, don't mind keeping it for a future application).

Quedó perfecto en el PS5. Este disipador fue aplicado para una Samsung 980 Pro de 2 TB y no hubo problema alguno en el proceso de instalación.

Entra perfecto en ps5 la recomiendo