15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs

This rocker socket switch, has served me well on my homemade projects. Very well made. I recommend this product to anyone who needs one.

I bought this socket for my arcade cabinet. Unlike other products where I have to connect wires between the switch and power myself, this one already has the wiring set up inside the plastic component, which is very convenient. I only need to connect the wires for the power, making installation much easier. However, the included wires couldn’t be directly connected to my outlet, so I used pre-made ones instead. The labels "L" and "N" indicate which side is Load and Neutral, while Earth is represented by a symbol.

Worked as expected with no issues.

The connection wires had very loose connectors. I had to take them off and squeeze them with pliers, then they stayed on tight.The terminals are not labeled. The pictures seem to imply that the top connection is hot, then neutral, then the ground separated by some distance. It comes wired that way too. The hot is actually the middle one, and the neutral the top. I tested w a voltmeter to make sure, then I switched the red and blue wires so I wouldn't forget which was which.Otherwise the switch seems to operate fine, and the power cord plugs in nice and snug.

Great for my guitar pedal board. Easy to wire.

So I needed another switch for another 3D printer build and noticed in the pictures the switch button itself has been revised to a smaller one, so hopefully it's more reliable. I purchased 2 so now I have a backup just in case. These things are dead simple to install with just 3 wires ready to go electrical connectors and all!Wow this was super simple to connect and it color matched the power cord I removed, color for color. Was literally done in about 5 minutes from the time I opened the package. I had to clean-up my print job a little to make it fit. Now I can easily turn-off my printer!Update: Only lasted 1 yr & 4 months. It broke and I have to buy a new one. Buying a different brand as I've hardly used my 3D printer.

Power "ON" signalled by annunciator in the switch is a nice feature. Connection wires included are not (apparently) colored to any standard, but may be identified to function by means of your own AC voltmeter. I connected this item W/ my IEC 320-C14 complient AC mains cable & the fit was excellent. No idea what the Chinese characters stamped into the unit mean...

The media could not be loaded. I cannot stress how helpful the pre-attached wiring makes this little switch. It takes most of the stress out of connecting wall power to my projects. Just a minute to verify which wire connects to which prong and I can wire it up without concern.I used this to provide power to a MAME cabinet I stuffed into a briefcase. The switch has a solid feel to it and it lights up nice & bright when it's flipped to ON. Power plugs insert easily and with a snug but not difficult fit. Wire quality is pretty good, being thick enough to work easily.There were two in the pack. Now I need another project...