NSITOP-M-D Easy-Twist Medium Ceramic Wire Connector, 22-10 AWG at 600 V, Splicing Wire, 1000 F Max, White with Pack of 15

Find out the ceramic cap is for high heat applications, and it is such a great invention. Give me peace of mind. Great product!

Bought these when I was replacing my oven ignitors, the ignitors weren't supposed to come with wire nuts so I bought these at the same time. The ignitors came with wire nuts which were awful, glad I got these as they actually grabbed the wires and didn't disintegrate.

I had to change igniters in my 20+ year old Viking range. The OEM Viking igniters come with the factory wire connectors attached but cost $165 each. I found the same igniter made by Robertshaw in the USA for $13 each but they had bare wire ends. I thought about soldering the connections and using shrink tubing but I really wanted a high temperature heat and fireproof connection and these ceramic wire nuts did the trick.I snipped the factory ends off the old OEM Viking igniters and used these wire nuts to attach those ends to the new igniters and reconnected them to the OEM stove connectors. I used stainless steel fireproof zip ties to loosely tie the wires away from the oven box and put the oven back together. I saved a over $300 in parts even with the cost of these wire nuts and the oven works like new.

I needed one more wire connector this size to replace the switch in my easel lamp because I had to cut a wire to get the old switch out. I used two of these because the old connector was plastic, and the lamp gets hot on top. The lamp was decades old and the old switch was worn out.

Perfect for oven gas igniter.

Replace my oven ignitor and used these to wire up.

I bought high temperature wire, and ceramic wire nuts. The wire came along with an empty box that said "Easy Twist Ceramic"... kinda hard to use an item that didn't ship.Update:A replacement was shipped and it seems to be what I need. I will give further updates after they are used at higher temperatures

You must use these high temp types for anything more than ambient / generic house/automotive.These are for anything higher, such as stove, ovens, heaters.I used these when rebuilding my Masterbuilt smoker along with higher gauge wire.The set I used: ceramic wire nuts (as plastic will soften and loosen) and high temp wire and high temp connectors.https://www.amazon.com/gp/product/B001ALN0JGhttps://www.amazon.com/gp/product/B008KNMONKhttps://www.amazon.com/gp/product/B0071NCA48These are also suitable for repairing hot plates, small electric heaters, etc.

Great for around heated elements such as stoves.

HAD TO WAIT TILL I GOT PRODUCT TO PUT EQUIPMENT BACK TOGETHER PUT BACK TOGETHER AND UNIT HAS BEEN WORKING WELL SINCE

as advertised

A little more expensive than the plastic ones but good for halogen fixtures.

good stuff