amFilm Screen Protector for Apple iPhone SE 2 (2020 2nd)/ SE 3 (2022 3rd), iPhone 8，7, 6S and 6 HD Clear, Flex Film, Case Friendly, PET Film, 3 Pack

Fabulous! I have been using screen protectors (cheap as well as expensive ones) for a long time and have never, ever applied any perfectly. It was always a frustrating and futile exercise to align properly and ensure no bubbles, lint remained inside. I always wondered why someone couldn't come up with a better designed product to eliminate these struggles. Not anymore. These are pretty much perfect. I applied, as per the instructions, in a humid bathroom. No lint, no bubbles remained. There are some rubber bands provided to hold the unpeeled protector on screen. You can align as much as you wish and these rubber bands will then hold it in place. After that, apply two band-aid like stickers provided to secure protector in place and remove the rubber bands. Now you flip the protector over and remove inner cover, stick to the phone. Remove any bubbles which form. Once done, peel away the outer cover. Enclosed instructions with diagrams will explain this process much better than I have. And it all works flawlessly. I have a perfectly aligned application with zero bubbles. Now, the protector doesn't go to the very edges of the display. I think this is because of the rounded edges of iPhone 6. There are cutouts at top and bottom for Home button, Camera lens and speaker. Everything else is covered fine. I did not feel that the protector should have been any bigger. It covers the screen just fine. Touch, feel and look of the phone post application is exactly as it should be. The packaging and delivery was also better than expected. Price is very low compared to some alternatives I have seen online and in stores. In a nutshell, for iPhone 6, I cannot imagine how any screen protector can be any better. Long term protection offered can of course be judged only over an extended period of usage. However, at present, these are perfect.

Great product. Nice application. Clear screen. Follow all instructions. Make sure to peel top layer off with blue tag. Only thing not in the box were the stickers, but I just used scotch tape.

If you’re avoidant of the glass versions, this is the best one to pick. It’s easy to apply and it’s been protecting my phone since I applied it.

I'm glad someone finally developed a more foolproof way to install a screen protector. I've tried many over the years... one that required an utter soaking with a special solution and turning off the device for 24 hours (really???), another that was horribly prone to bubbles. Another was like a layer of silicone on top of my screen that changed the feel - I had to re-learn how to "touch" my touchscreen. This product was so much better and easier! The package contains three screen protectors and the standard screen cleaning cloth and squeegee cardboard. But here is the improvement: they provide (a) rubber bands and (b) hinge tape to aid in positioning the screen protector before the outer film is removed. So here you go: Position the film component on the screen. Secure it with the rubber bands near top and bottom. Adjust the film position; it will stay there by virtue of the rubber bands. THEN! Peel off a hinge tape and apply it to one edge of the film, wrapping it around to the back of the device. Then peel off a second hinge tape and do the same. The two hinges should be placed between the rubber bands and far enough apart that the film won't shift. Then, remove the rubber bands and flip the film away from the screen. The hinge tape will hold it in the right spot. Do another screen clean with the cloth (here's where you really want to avoid dust, so either do this in a steamy bathroom or use a third piece of tape to remove any tiny flecks of dust). Peel off the inside layer of protective film, then flip it back onto the device screen. It will be positioned Per.Fect.Ly. Squeegee out the bubbles, then carefully remove the outer layer of protective film, taking care not to pull off the actual screen protector in the process. Squeegee out any remaining bubbles. DONE. One suggestion for the manufacturer: the hinge tape is called "Dust Removal/Hinge Stickers". There are 6 strips included. That allows for 2 strips per screen protector. If I end up using all three screen protectors over the course of time, that would require all 6 strips to be used as HINGES. Aside from reusing the strips from application #1 on application #2, which ones should I use as dust removers? What if you were to include at least 3 more strips in your standard packaging? I realize that is rather petty and it certainly isn't a deal-breaker. I do own a roll of tape or two and could figure this out... just thought I would share. In all, I'm very pleased with the end result. I'd never know there was a screen protector in place on my iPhone, and I was able to install 3 of them on the phones in our household at 6am over my first cup of coffee.

This is by far the best screen protector that I have had for an iPhone. I would definitely recommend it to anyone with an iPhone 6. To anyone wondering: No, it does not cover the whole screen .. because it couldn't. The screen on the iPhone 6 is curved and no screen protector would stay on on a curved screen (and putting a case on the iPhone would not be possible). It does cover the complete viewable part of the screen. Putting on this screen protector is unusual (in my experience). Here are the steps: 1. You line-up the screen protector on the screen then put the supplied elastic bands on to hold it in place (and you can make small adjustments to your positioning if you wish). The only potentially confusing part of this first step is that you put the side with the "Step One" tag facing the screen. 2. With the elastic band still in place, you further hold the screen protector in the desired position with the supplied (lightly) adhesive strips. Then you remove the elastic bands. 3. The adhesive strips now form a "hinge" that allow you to flip the screen protector to remove the "Step One" side of the screen protector and then flip the screen protector back on to the screen (if the adhesive strips are firmly in place, the screen protector will flip back into the desired position on the screen). 4. With the screen protector in place on your screen, you can remove any air bubbles. This part worked like a charm and took me less than 30 seconds (with other screen savers that I have used, this used to be the worst part of the procedure). 5. Remove the "Step Two" side of the screen protector ... and you're done. As I say, I would recommend this to anyone (although the instructions could be written a little more clearly, especially given that the procedure of putting the screen protector on is a little different from others).

I originally bought these screen protectors because it came with 3 and the price was low. That way when the screen protector gets too many scratches I can just replace it or if I get too much dust underneath during application. What I didn't know was that this company has come up with a really ingenious way to apply the protectors. They have you align the protector without taking any of the protective films off it. Then you use these clear rubber bands to hold it in place and do final adjustments. Then you have these removable pieces of tape to hold the protector in place while u remove the rubber bands. Then you use the pieces of tape like hinges to turn over the protector, remove the first protective film then flip it quick back to the phone. The tape holds it in place so it is very easy to quickly and perfectly apply the protector. It makes application super easy and quick. I will only buy this company's protectors from now on! Here is a good tip for those of you having trouble with dust getting underneath the protector during application: RUN A HOT STEAMY SHOWER! Yes you read that right. Run your shower hot and steamy for about 7-10 minutes depending on your bathroom size. While doing this keep the door closed. Once the bathroom is like a sauna apply the protector in the bathroom. The high humidity in the bathroom from the shower weighs down all the dust in the air so all you need to do is wipe down your workspace and you won't get a single piece of dust under the protector. It works every time!

These are no longer the screen protectors from prior purchases. It is a thin, skimpy and useless glorified film which over no protection from falls or drops. Amazon needs to change the description and list it as a new product, not link it to the older model good quality screen protectors. No value for the money. They are useless! Buy something else.

When I first looked at this screen cover I was a little reluctant to buy it due to some of the reviews. However, I took a chance. I must say, it is a very well produced screen cover for the price it's offered for. The package comes with 3 screen covers and additional tools to help you when applying the screen cover. It comes with a cloth, clear rubber bands, tape, and a card to get the air bubbles out. There is a small instructions book with very simple and easy steps for applying it. This was extremely helpful when applying the screen cover. All the tools were beneficial and helped when applying the screen cover. One thing I found was a little difficult was applying it evenly. I am slightly OCD so I redid the positioning several times. It is a little tight and you have to be careful to make sure it is even like you want it. However, the seller makes you aware of this through a email and in the details. (Due to the curve of the phone) Throughout the instructions it gives you very detailed step by step instructions. I had a few tiny air bubbles once I put it on but that was my fault. (I do not have a sturdy hand) Overall, I would recommend purchasing this screen cover package. You get three in a pack and I love it so far, even with my two tiny air bubbles!