SwitchBot Accessory Add-on 3M Sticker Mate for Smart Home - Pack of 4

After several months the SwitchBot is still sturdily stuck in place. Survived high temperatures in the summer too. Great value and easy to use.

I bought this with the rest of the kit as I was not sure how many each device would come with, it's great if you are a little over keen to try it in different spots and spoil the 3M tape. If you ordering all your bits, great as a just in case.

Well worth the money

I think they’re a bit on the expensive side for what they are, but they work well.

So if you buy a black switchbot you’re left with no choice. Other than that nothing to say it’s a 3m sticker

I got this for my boiler switch which is much narrower than the strip provided and slightly curved, I even cut it to size and still didn't still and kept peeling off. Don't buy this if your switch if curved

Ordered this sticker set thinking the smartbot came without any. Well, it wasn't a waste of money because I ended up destroying the first sticker it came with trying to reposition it - which you can do, by the way, just be careful. My issue with these is they should come with different loop sizes for different size buttons. They barely fit my light switches, which are standard size switches in a newly built house. Luckily, the adhesive is so strong that it doesn't really matter that only half the smartbot hovers over the switch. Also, how about different colours, so they don't stand out as much on anything that's not white?

Failed to stick the SwitchBot to desired device

Using samsung s20 with hub and button pusher. When you want use nfc you need to unlock your phone and that's normal, but after this switchbot app it's opening and screams about some error, after 3-5 sec I can use sticker second time when app is already opened and it works, but still I need to do this twice everytime so it's not fast and buggy for me. Same problem with all 3 stickers and on my older phone some lg. Quality of that sticker is good.

Nice to have Xtra pieces from a company. If this important little part needs to be removed , great to have this from switchbot ,well done!

Needed new stickers. Glad they sell replacements. Works as well as the originals

Must have add on to SwitchBot light controller. With this I was able to have the SwitchBot pull the light switch to turn on or off the light. Super helpful in automating or turning an old house to smart living.

【良かった点・気に入ったこと】 - 強力な粘着力で、スイッチや壁面にしっかり固定できるのが嬉しい!(^^)! - 専用設計だからサイズ調整なしでそのまま使えて便利(^^ゞ - 4枚入りで交換用にも十分な枚数があり、交換も簡単！ 【注意点】 - 湿気や凹凸のある壁面には粘着力が弱まる可能性あり( ..)φメモメモ - 設置前には面の清掃が必須なので、注意('ω') 【使った感じ】 - 簡単に設置できて安定感抜群(*'ω｀) - 交換が簡単で、跡が残りにくいので使いやすい(*_*)