Hosa FSC-385 Footswitch, Guitar-style, Dual-latching

Works great with my Katana amp for much less than the Boss FS.

I use this with my BOSS SY-1. It’s a game changer!!

Works with my Laney amplifier for switching boost and channels.

The main case is rigid aluminum. Two plastic side panels are held on with 3 screws each. The sides will probably break if the unit is dropped, but will withstand normal stomping. The flat bottom panel is a flat piece of steel that slides snuggly into grooves on the aluminum chassis. There are two strips of semi-firm rubber on the bottom which are a bit too smooth to prevent the switch for sliding around.Inside the unit, the latching switches are SPDT (single-pole, double-throw) with the common lug and one side lug connected to the jack. The jack is a single TRS plastic panel mount component. One switch is connected to the TIP and the other to the RING. Some devices might expect a TRS plug for their switch inputs. Some will require two TS plugs. In the latter case, you will need a 1/4" stereo (TRS) to dual mono (TS) "Y" cable or the equivalent adapters to use both switches.As a side note, the SPDT switches give you the option to wire them to a second SPDT momentary switch and have them work together. I just finished this mod and now have four buttons the top two are the original latching buttons and the lower two are momentary. The top switch reverses the state of the lower. It's useful when you want chose between making a temporary change or latching it on/off. If you want to know more about this mod, ask in the comments.Overall, I'm satisfied with this product. For the price, it's fine.

Works like a charm, like Hosa products usually do. I needed to be able to switch a harmonizer on and off as well as change the presets, and this pedal lets me do both. I don't know that I would take it on a world-tour, but for weekly local gigs, it is perfect.

For channel switching & reverb on older Laney LC30. Works great!Purchased this amp 15 years ago without the original 2 button footswitch. Used an old Peavy switch for years until it gave out. This Hosa switch is great. Solidly built.Works as it should. Very pleased!

This is a great, sturdy foot pedal for amps. It is compatible with both the Blackstar HT-1R MKII and the HT-5R MKII. I got the bundle with the stereo TRS cable for $5 more.

This switch works fine, Except, I always have to push the switch button twice to get it to change channels, or switch the reverb on/off. It's annoying to switch by pushing the button twice so it's ready to switch!