Pool Patch Pool Tile Adhesive Setting Repair Kit 3 lb - Easy to Mix and Apply Thinset Formula - Perfect to Glue Pool Tile - Quick-Drying, Extra Strong Bond - (coverage: approx. 6 sq. ft)

This is my first time trying to replace a couple of pool tiles (@15 to be more precise). Mixing this adhesive and then applying really was simple...it is critical you thoroughly mix/stir in the water and get a creamy smooth mix to apply to the tiles. From there it is very straightforward. Take your time and you will be very happy with the results.

This stuff works great. Use it to reattach pool tiles and the first ones I replaced almost 5 years ago and still holding strong.

Good product. Easy to use.

Works well. Reinstalled pool boarder tiles that had fallen out after many years. Minimal guidelines (i.e. no quantities for mixing ratio, no installation temperature metrics, etc.) Have to give it a season to see if tiles stay put.

Perfect; powder, mix in water, adhere to dryer area, cure for 4 hours, cover with water. Perfect.

First off the instructions are basically nonexistent. They give no mixing ratio which makes mixing this stuff next to impossible. It is hard to work with and does not create a good bond for your tiles. Any other waterproof tile adhesive would be better and much cheaper.

Just enough to tile a section 12 ft long using a 6 in.tile.i split the 3# contaier into 3 equal parts. Gives enough time to apply each batch without setting up on you.used a 1/4 in. Trowel.for adhesive thickness.. be sure to remove as much of the old thin set as possible for a smooth surface and good adhesion. We were quoted 2000.dollars to do the job.after finding new tiles ,a few hours of labor and the cost of pool patch.we saved a bundle.give the tiling job a try and you will surprise yourself. Great product.as is the pool path grout follow up

This product is easy to prepare and apply. I keep a jar in the garage since tiles periodically come loose and need to be reinstalled.