HUANUOSingle Monitor Mount, 13 to 32 Inch Monitor Arm, Adjustable Monitor Stand, Vesa Mount with Clamp and Grommet Base - Fits 4.4 to 19.8lbs LCD Computer Monitors

I was super impressed with the quality of this. I haven't used many monitor arms, so I don't have much to compare it to, but for the price this seems great. It was fairly easy to put together and comes with directions, it has all the tools needed in the box.It's heavy (in a good way), and the gas element was easy to adjust with the included tool. Read the directions, they don't recommend adjusting it until the weight of the monitor is on it for safety. I was okay, but I did start messing with it before attaching the monitor and apparently that's not a good idea.I used the clamp attachment, and it felt very solid. It does require having a desk/table that can accommodate it, but I would recommend it. There is an option for a screw in attachment, but you'd need a hole so it might require some drilling.Once set-up, the monitor had a great range of movement and it felt nice to use.For the price, this feels like a no brainer if you need a monitor arm.

Solid monitor arm, does as good of a job as expensive arms at more than half the cost and doesn't sag at all. I'm using a HP 24 inch monitor and it works great with this mount. The desk mounting hardware is surprisingly sturdy for how low-tech it is. The VESA mounting plate on the arm also works great with zero noticeable issues thus far. If you're worried about how the mount will cope with a very thin desk (thickness less than 0.59") I recommend getting the support plate for it as it could potentially ruin your desk with heavier monitors.PROS:• Looks good and functionally great• Built in cable routing• Lots of adjustment points• Lightweight but still durable• Easy mounting job, clear instructionsCONS:• Not suitable for glass desks and could be risky with honeycomb material desksOverall, this is a really good choice if you use a wooden (or other solid material) desk. Ideal for professional or casual use. 10/10

I have been using this mount now for almost a whole year. I have changed monitors several times. I have used two different 32-in monitors. One was flat and one was round and fairly heavy. I was worried about this mount handling the weight of such large monitors, but it is advertised to handle a 32-in. Even with the heavier monitor the weight is no problem. Even with the arm fully extended, it holds the weight of the monitor just fine and keeps it in position. When fully extended it might shake a little bit if the desk gets bumped, but I am surprised at how steady it is. It was also extremely easy to adjust and get set up. There are a few other similar mounts on Amazon for a cheaper price, but I plan on buying two more of these because I am impressed with the value and quality.I recently bought a three monitor mount hoping it would hold my three screens in a wrap-around racing setup. The arms didn't extend quite long enough so I have decided to buy three individual mounts instead. When I do buy two more of these and get them set up I will post a picture in a future review.

The mount does what it says it will, it has good cable management, good support/doesn't fall down even at full articulation, the arm has good articulation and is easy to move yet stable. Installation is simple.The reason for 4/5 is that the tilt function is... challenged. Side to side (left/right axis) tilt is great, it's the tilting up and down that's a problem. There seem to be two settings of friction to the up and down tilt- too loose or too tight. I can't run it on the loose side or my monitor will fall forward/backward. When I make it just tight enough not to fall forward, the only way to tilt it is to grab the monitor with both hands and jerk it in/out at the top/bottom to break static friction. And this is as loose as it can be without moving on its own. It feels like I'm going to break the monitor or the joint on the arm when trying to get articulation in this axis so I just set it and adjust my chair instead. The monitor is easily rotated clockwise/ccw as well, it's literally just the forward/back axis that is poorly designed and is weirdly notchy- like it's trying to lock into place after being set but then won't let go for adjustment.Anyways for $35 or whatever it's on sale for I would absolutely buy it again. Just make sure your chair is adjustable to make up for the fact you won't want to be changing the monitor height itself much.