15-Bin Garage Organization Rack - Carbon Steel Rack with Removable Stackable Plastic Garage Storage Bins - Tools Organizer or Small Parts Organizer for Hardware,

Lots of use out of these. No problems

I like it very much useful

I purchased two of the 30 bin wall mounted parts rack. All items were received without damage. I attached a 36" x 54" piece of 1/2" plywood to my garage wall via wood 3.5" screws secured into the studs. I then secured the panel boards into the plywood with 1 1/2" wood screws. I put in a few additional screws to the panel boards to make sure they were securely attached to the plywood. Next I attached the bins which are now securely attached to the panel boards / plywood. I would agree with other reviewers that these bins are not really strong enough to be removed and reattached multiple times. For my use I don't plan on removing the bins as I work in close proximity to the bins. The bins are not of the highest quality, but are certainly strong enough for my use. I like the mix of smaller and larger bins as I have quite a variety of screws, bolts, washers, lock washers, nails etc. Because this worked for me I ordered two additional sets. Attached photo shows how I used the bins.

could be more sturdy

Good

The set seems to be a great deal when you first receive it. The bins themselves are relatively sturdy and a good size for smaller itEms like nails, screws, bolts, etc. The board they hang on, the drywall anchors and the screws used to hang the bins, however, are low quality and not able to complete the job intended.The instructions suggest putting each support in a stud, but the guide holes in the backIng aren’t placed wide enough accommodate that guideline. This leaves the option of drilling holes for dry wall anchors. There’s no information in the provided instructions the size of bit to use for this, so a you’re left starting at the smallest reasonable size and going up till you find a fit. Once done the anchor amounts to a plastic cylinder with three small ridges that protrude out to hold onto the dry wall. These ridges just serve as effective means to mill the surrounding Sheetrock into dust as you attempt to tighten down the screws And the anchor spins with it.The screws strip even when hand applied and the backboard cracks of you look at it wrong.

Took me five minutes to get it hung up and put together. It is a great option. If you don’t want to spend money on a fancy unit. The trays are a bit flimsy but definitely hold anything you put into it. Just place it somewhere it won’t get bumped because the trades will come straight off the hangers if you bump them

Looks cheap, and performs cheap. Not used much because it was harder taking the bins off & on. I found the guys just kind of ignored it preferring other storage options. The bins were thinner plastic than I hoped for. I wouldn't buy it again. I would look for something sturdier.