FDC Rust Converter ULTRA 1 Gallon Paint for Exterior Metal & Wood Surfaces

Wear rubber/nitrile gloves, you'll need them. Having a fine nap paint pad may be handy if you don't have tons of gloves. Product is thin and coverage is excellent. Thin yet somehow viscous enough to not drip a lot. Applied with brush on rusty OME leaf springs. Everywhere that factory finished remained it turns whitish. (Manufacturer recommended using oil based finish to protect once product cures in 48 hours) like any job, prep is key. your mileage may vary. Everywhere there is rust or bare metal turns a dark purple/midnight within 30 minutes. It foams a lot so wouldn't recommend using an air sprayer. The cleaning type sprayer (Windex bottle) would be good on "stream" for covering large areas of truck frame or large projects.When foaming occurs in project material; sampling rub with gloves hand or use fine napped paint pad or microfiber cloth. Used about 4 oz. to cover all leaf springs twice over. Next morning product seems cured with no off-gassing. Time will tell longevity. I tested rusty bolts, a shovel, some plate steel. Un cleaned truck frame, product was not picky ... Works on just about everything. Much easier, cleaner, better coverage and adherent, non-fuming alternative to POR15

Used it for a 44 foot 1974 steel hull houseboat. I bought 3 jugs and it was plenty to do all of the outside including the deck. I'm ordering another 3 jugs for all the inside and it'll hopefully be enough to do a 1970 Travco motorhome frame.It basically turns the rust into a dark grey finish, almost like a base coat paint. Supposedly it won't rust again. I'm impressed how easy it was to apply with a roller and how it turned out.

Used on my 2001 Tacoma for the frame and bed. This stuff really goes a long way. I was torn between getting this or something like Pore-15. Pore-15 may do a great job, but doing the price comparison, there was no way I would have been able to do a 1/4 of what i coated on my truck with Pore-15. This stuff works great and goes a long way. When I'm done I'll probably have over half of the jug left over! Great value for the money!

The product arrived on time in sturdy packaging and well sealed so there were no leaks. I am using the rust converter to aid in the restoration of an automobile as well as to help prepare some equipment that has some rust on it for paint. Directions indicate the converter should be applied at a temperature above 10 C or 50F. Today the temperature reached that temperature so I was able to begin applying it. The converter can be used as a primer and is paintable which are good features. I was able to apply some rust converter and it worked as advertised but haven't painted over it so I can not comment as to how the product performs in this regard at this time.

good product